• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4A
• /
• pp.271-281
• /
• 2005

This paper for establishing the reliability of the TPC command is introduced, where the soft symbol of the TPC command itself is directed used as a reliability indicator. In addition to the new reliability estimation, the concept of parallel use of TPC algorithms is presented. The results show that the soft symbol reliability estimation decrease the $P_{tx}$ levels with 0.3 dB, thus providing a useful capacity gain. The parallel use of 2 to 4 algorithms is also shown to decrease the sensitivity of the algorithms to the algorithm thresholds used, and thus increase the feasibility of the algorithms in a real world networks.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.237-241
• /
• 2008

Femtocells are cellular access points that connect to a mobile operator's network using residential DSL or cable broadband connections. They have been developed to work with a range of different cellular standards including CDMA, GSM and UMTS. Like legacy base station, the frequency accuracy and phase alignment is necessary for ensuring the quality of service (QoS) for applications such as voice, real-time video, wireless hand-off, and data over a converged access medium at the femtocell. But, the GPS has some problem to be used at the femtocell, because it is difficult to set-up, depends on the satellite condition, and very expensive. So, some techniques are discussed to alternate with the legacy GPS system. NTP, PTP, Synchronous Ethernet use the ethernet to synchronize distributed clocks in packet networks. AGPS support reliable position information than the legacy GPS in poor signal conditions. But, These method also have some problems. So, hybrid timing method like A-GPS+PTP and TV+GPS was developed to make up the weak point of GPS. This paper introduces the each method and compare each other and y propose much better solution for timing synchronization at the Femtocell

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.2
• /
• pp.41-49
• /
• 2007

USIM(UMTS Subscriber Identity Module) technology that accept 3GPP(3rd Generation Partnership Project) standards for information security supports security function in 3GPP. Supported security functions of USIM are confidentiality of user identity, mutual authentication and key agreement between end user and network, confidentiality of user data and data integrity. It is very important technology in wireless network. It makes secure environment that user and service provider can use securely mobile service in network. In this paper, design and implementation USIM security module that supports common network access method and authentication protocol in 3GPP and WLAN(Wireless LAN) and AAA (3A-Authentication Authorization Accounting) server system based RADIUS.

• Information and Communications Magazine
• /
• v.15 no.11
• /
• pp.124-142
• /
• 1998

ETSI BRAN (Broadband Radio Access Network)는 고속 무선 LAN 또는 고정 광대역 무선액세스 네트워크에서의 무선 접촉 계층과 ATM 및 IP(Internet Protocol) 코어 네트워크와의 연동을 위한 일부 기능을 표준화하기 위한 과제이다. 특히, BRAN의 HIPERLAN type-2(HIPERLAN/2)의 경우에는 과제의 범위는 무선 접속면, 무선 부시스템에서의 서비스 인터페이스, 서비스 구현에서 요구되는 연동 및 각종 지원 기능을 표준화하며, 무선 접속면의 경우에는 다수 벤더간의 상호 호환성을 제공할 수 있는 인터페이스를 구현하는 것이다. HIPERLAN/2의 기술 규격은 코어 네트워크와 독립적인 물리계층 및 데이터 링크 제어 (DATA Link Control: DLC) 계층과 서로 상이한 코어 네트워크와의 연동을 위한 네트워크 수렴 부계층을 다루게 될 것이며, 초기 단계에서는 ATM과 IP 코어 네트워크와의 연동 기능을 제시하게 될 것이다. 따라서 HIPERLAN/2기반의 시스템 규격을 제시하기 위해서는 네트워크 계층 및 기타 상위 계층에 대한 규격이 요규되며, 이는 ATM Forum에서의 무선 ATM 신호 방식 규격, IETF(Internet Engineering Task Force)의 IP규격, 그리고 ETSI의 SMG (Special Mobile Group) 프로젝트에서 표준화되고 있는 UMTS (Universal Mobile Telecommunication Service) 규격 등과 접목될 것이다. 결과적으로 무선 ATM 관점에서는 완전한 시스템 규격 작성은 ETSI BRAN과 ATM Forum에서 무선 접속 규격과 이동성 관리 및 신호 방식으로 각각 이원화되어 진행되고 있다. 현재 물리 계층에서의 전송 방식은 OFDM(Orthogonal Frequency Division Multiplexing)으로 확정되었으며, DLC 계층에서는 고정 길이의 TDD (Time Division Duplexing) TDMA 프레임 구조를 기반으로 AP (Access Point)에 의해 동적으로 상향 링크 자원을 예약 할당하는 매체 접근 제어 (Medium Access Control: MAC) 프로토콜이 고려되고 있다. 이와 같은 DLC 계층에서는 기본적으로 짧은 길이의 패킷을 통해 다양한 대역폭의 멀티미디어 트래픽을 효율적으로 수용하면서 ATM 네트워크뿐만 아니라 향후 IP 네트워크에서 요구하는 각 서비스별 QoS (Quality of Service)를 개별적으로 보장할 수 있는 기능을 구현하고자 한다. 향후 이 부문에 대한 표준화가 본격적으로 진행될 것으로 예상되며 HIPERLAN/2의 경우에는 1999년 중반까지 1차 기능 규격을 완료할 예정이며, BRAN 전반에 대한 완전한 규격을 2002년까지 완성하는 것을 목표로 하고 있다.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.427-431
• /
• 2007

Applications in present-day mobile communication systems particularly require miniaturized dimensions and low-profiles of antenna in order to meet the mobile units. Thus, size reductions and bandwidth enhancements are becoming crucial design considerations for practical applications of microstrip antennas. The motivation of further experiments have been stepped to follow those studies for achieving compact and broadband, even multiplied operation modes, which are greatly increased with much attentions recently. To obtain broadband, single-feed, circularly polarized characteristics of microstrip antennas, a design with feed-line ought to be a factor of two. Usually, diagonally balanced-line feeds with hybrid coupler are employed to attain circular polarizations. We firstly formulated DGS (Defected Ground Structures) based operation principles of the entire microstrip components and therefore were able to derive impedance variance of feed-lines. After verifying corresponding experimental results, we targeted the frequency bands of UHF RFID (Ultra High Frequency Radio Frequency IDentification) and approximately of 0.4-2.4GHz have exhibited remarkable two resonance amplitudes as a dual band antenna. Our secondary researches were aimed to design quad band microstrip antenna which represents four resonance characteristics within the identical frequency bands as well. Microstrip patch has been meandered to lengthen the electrical paths, and the other design criteria with respecting physical parameters including radiation patterns and impedance bandwidths measurements will be described for verification. Advisable applications of these antennas can be GSM850, GSM900, GPS (L1-1575 and L2-1227) and UMTS-2110 of cellular systems, which extremely desire multiband and minimum size.

• Journal of Multimedia Information System
• /
• v.7 no.3
• /
• pp.221-230
• /
• 2020

Used optimization techniques as solution for mobile network have been implemented as a reference systems for various applications against fading and signals perturbation, in addition each transition to 5th generation telecommunication standards require a deep studies in order to park an applied instantaneous process. The paper describes a preliminary planning and a careful preparation to update both subscriber radio access network as well as data transmission network this approach conducts to make network resource updates invisible for customers and with minimal costs for mobile operators basically in terms of delay. In addition, network operators transit to mobile networks, multimedia services efficient delivery are considered the challenging application and the most promising for mobile network operators today, this work conduct to optimize video consumption of mobile users which are exponentially increasing. The interference is a complex phenomenon in mobile radio telecommunication system, and a mobile phone can be a source of interference to another one. Actual advances in technology necessitate the need for the complicated software solution that can take several unexpected phenomena in consideration to rise to a level higher than ever. The capability needs today require the use of Drive test which is used to take the performance of network in the field by using a special software called TEMS investigation, it have been implemented as standalone systems for various applications. The paper focuses on considering as the best technical for optimization of mobile networks, analysis and processing of signal, a Drive Test is the method used to take the performance of network in the field by using a special software called TEMS investigation. Most used in the world, this software is reputed to detect and analyze many problems of mobile network between the mobile phone and the transmitter: BTS in case of GSM and Node B for UMTS. An example of that is interference in radio communication. It exists permanently and it degrades considerably the quality of received signal when it exceeds certain levels.

• Journal of electromagnetic engineering and science
• /
• v.14 no.4
• /
• pp.393-398
• /
• 2014

A highly efficient dual-mode linear CMOS stacked-FET power amplifier (PA) is implemented for 3G UMTS and 4G LTE handset applications. High efficiency is achieved at a backed-off output power ($P_{out}$) below 12 dBm by employing an active-bypass amplifier, which consumes very low quiescent current and has high load-impedance. The output paths between high- and low-power modes of the PA are effectively isolated by using a bypass switch, thus no RF performance degradation occurs at high-power mode operation. The fabricated 900 MHz CMOS PA using a silicon-on-insulator (SOI) CMOS process operates with an idle current of 5.5 mA and shows power-added efficiency (PAE) of 20.5%/43.5% at $P_{out}$ = 12.4 / 28.2 dBm while maintaining an adjacent channel leakage ratio (ACLR) better than -39 dBc, using the 3GPP uplink W-CDMA signal. The PA also exhibits PAE of 35.1% and $ACLR_{E-UTRA}$ of -33 dBc at $P_{out}$ = 26.5 dBm, using the 20 MHz bandwidth 16-QAM LTE signal.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.522-528
• /
• 2017

In this paper, we propose a multi-band antenna for wearable devices using metal frame coupling. The proposed antenna has a $45mm{\times}35mm$ antenna using metal frame and a ground dual coupling structure. The proposed multi-band antenna in this paper is optimized for small devices such as wearable devices. By using the metal frame as a part of the antenna, the volume of the antenna is reduced and satisfies under VSWR 3:1 impedance bandwidth of 70 MHz (870 ~ 940 MHz) in low frequency band, 280 MHz (1600 ~ 1880 MHz) and 280 MHz (1900 ~ 2170 MHz) in high frequency band. It also verified the applicability of wearable devices by measuring wireless performance indicators such as TRP/TIS.

• Journal of KIISE:Information Networking
• /
• v.36 no.3
• /
• pp.184-190
• /
• 2009

WiBro has advantages when both WLAN and 3G UMTS are adopted. Much research is being carried out in this area. However, the WiBro specification does not consider end-to-end security. Hence, another security protocol has to be adopted to support secure communication. Most previous research only focused on WiBro MAC performance improvement or security. In this paper, we adopt a security protocol such as IPsec, TLS, and DTLS, well known end-to-end security protocols, to make full use of WiBro in the IP network. Using NS-2 we simulated the adoption of end-to-end security protocol and evaluated performance and usability. Simulation shows DTLS had some performance advantages. All the protocols, TLS and IPsec are also suitable for use in WiBro.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.8
• /
• pp.804-810
• /
• 2002

The code division multiple access(CDMA) system capacity is limited by the amount of interference of the system. To reduce the unnecessary interference, this paper proposes optimized cell identification codes for site selection diversity transmission(SSDT) power control in wideband code division multiple access system of third generation partnership project(3GPP). The main objective of SSDT power control is to transmit on the downlink from the primary cell, and thus reducing the interference caused by the multiple transmission. In order to select a primary cell, each cell is assigned a temporary identification(ID) and user equipment(UE) periodically informs a primary cell ID to the connecting cells during soft handover. The non-primary cells selected by UE do not transmit the dedicated physical data channel(DPDCH) to reduce the interference. A major issue with the SSDT technology is the impact of uplink symbol errors on its performance. These errors can corrupt the primary ID code and this may lead to wrong decoding in the base station receivers. The proposed SSDT cell ID codes are designed to minimize the problem and to be easily decoded using simple fast Hadamard transformation(FHT) decoder.