• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.2
• /
• pp.19-24
• /
• 2015

In this paper, a folded label type RFID tag antenna is designed and produecd for metellic environment over UHF band. Since performance of regular label type RFID tag is seriously degraded for the metallic environment, a folded label tag is proposed to improve the performance. The proposed tag is operating at 910MHz by using inductive T Matching Feed and simulated in HFSS by Ansoft. The actual size is $65{\times}23{\times}3(mm)$ with the impedance of $52-j158{\Omega}$. The maximum distance of identification for the proposed tag is measured as 5.5 meters.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.2055-2058
• /
• 2002

It designs the general description of 8-VSB DTV transmission system will be installed and operated in future on the basis of NTSC TV transmission system in operation now. First of all, it investigates a condition that can maintain optimum received field in case of ground wave broadcasting with analog NTSC and digital 8-VSB DTV. Also it calculates critical value of minimum field strength fur receiving by using field strength calculation method of Longley-Rice. The 8-VSB DTV transmission sets its goal in transmission of data with 19.39Mbps at high speed in order to be available of HDTV in the band of NTSC 6MHz. Accordingly, the optimum of field strength between transmission and receiving points most of all is important problem. So,8-VSB DTV transmission should be enlarged or effective compared with NTSC service coverage. This study is to calculate the transmission power necessary in switching from NTSC VHF to DTV UHF and from NTSC UHF to DTV UHF for maintaining service coverage that NTSC is equal to 8-VSB DTV as a result of calculation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.1
• /
• pp.40-47
• /
• 2013

By virtue of Rec. ITU-R P.1546 and geography information system, interference analysis for the fixed wireless system and radar has been presented based upon the frequency-distance rules with minimum coupling loss, and a comprehensive methodology for assessing interoperability between systems was examined in terms of received signal, protection ratio, frequency dependent rejection. Also to find the antenna gain from a discrimination angle, a useful S-I plane was introduced based on signal and interference vectors derived from the real map with geographic information. To show some computational results, geography information on the map was taken for the given area, and field strength and path profile were illustrated for the radar and fixed wireless system operating at 2.7 GHz, for convenience. In addition the interference effect of receiver was also checked as a function of radar beam direction including protection ratio and frequency dependent rejection. The developed interference analysis can be actually applied to evaluate interoperability for wireless systems in the VHF and UHF bands.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.1
• /
• pp.63-69
• /
• 2014

RFIDs have not become widespread as expected partly due to the cost, size, read range, and reliability problems of tags. The success rate of reading must be improved in order for RFIDs to be widely adopted. Quality control of tags is crucial to meet this requirement. In this study, we designed and implemented a high-performance reader used in inspection equipment that conducts prior inspection of tags. To improve performance of the developed reader, the baseband modem and command processor (CP) were designed using H/W logic and implemented with FPGA. The inspection of small pitch inlays was made possible through the antenna shielding device and H/W command processor function. This equipment enables accurate evaluation of performance and identification of tags satisfying a given read range. By contributing to sort out defective tags, the results can ultimately lead to more stable RFID services.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.11
• /
• pp.90-94
• /
• 2008

Recently, a great deal of research is focused on the printed electronics. One of their mainly concerned products is printed RFID tag. RFID technology has attracted researchers and enterprises as a promising method for automatic identification, and they are expected to replace conventional bar codes in inventory tracking and management. The key to successful RFID technology lies in developing low-cost RFID tags and the first step in applying printing technology to RFID systems is to replace antennas that are conventionally produced by etching copper or aluminum. However, due to the printing quality variations, errors, and lower conductivity, the performance of the printed RFID antennas is lower than that of antennas manufactured by conventional etching methods. In this paper, the effect of variations in the printing conditions on the antenna performance is investigated. Three levels for each condition parameter is assumed and effect on the resonant frequency are examined experimentally based on orthogonal array. The most serious factor that affects the resonant frequency of the antenna is the non-uniformity of the edge and the resonant frequency is found to be lower as the non-uniformity increases.

• Journal of the Korea Society for Simulation
• /
• v.30 no.2
• /
• pp.33-40
• /
• 2021

The situation of high-altitude electromagnetic pulses (HEMP) arises from high-altitude nuclear explosions. The HEMP situation can be simulated through the threat level investigation (TLI). In this paper, the induced voltage according to the antenna type of the tactical mobile radio communication system was measured and analyzed by TLI. Under the influence of HEMP, electronic equipment can be paralyzed or damaged. HEMP protection filters are commercially available for power lines and signal lines. However, commercialization of HEMP filters for antennas is insufficient, and even some of them exist for lightning protection. In order to make an appropriate HEMP protection filter according to the frequency and type of the antenna, the induced voltage was measured and the maximum induced voltage was analyzed through extrapolation. It was found that the measured induced voltage decreased as the frequency increased, such as in the HF, VHF and UHF bands of the measurement results.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.846-849
• /
• 2009

본 논문에서는 듀얼 밴드(UHF: 470-862 MHz, L: 1452-1492 MHz) DVB-H 안테나를 제작하였다. 제안된 안테나는 입력 임피던스 매칭 회로를 이용한 평판형 역 F 안테나(PIFA)로 구성되었다. 급전점에 구성된 매칭 회로는 안테나의 광대역(UHF: 470-862 MHz: 63%) 동작특성을 만족시킨다. 제시된 안테나는 전방향적 방사특성을 가지며 상용 모바일(PMP)에 적용가능한 충분한 이득(최대이득: 1.70dBi)을 보인다. 또한 안테나는 유전율($\varepsilon_r$ = 3.2)인 PMP 케이스에 부착되어 상용 모바일용으로 소형화 되었다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.424-426
• /
• 2007

본 연구에서는 UHF 대역의 측정이 가능한 Cavity 안테나를 이용하여 절연진단기술에서의 적용가능성을 검토해 보았다. 제안된 안테나는 유전체 손실이나 급전라인의 손실이 없는 공기를 매질로 하므로, 고출력에 적합하며 고효율을 가진다. 또한 제작이 용이한 구조를 가지므로 대량 생산 시 많은 장점올 가질 것으로 기대된다. 시뮬레이션을 통하여 Cavity 안테나가 0.3 ${\sim}$ 10[GHz] 대역에서는 -10[dB]이하의 Return loss값을 가지는 측정주파수 대역이 약 2.7 ${\sim}$ 10[GHz]로 나타났으며, 0.3 ${\sim}$ 2.5[GHz]의 대역일 경우는 측정 주파수 대역이 약 0.7 ${\sim}$ 2.5[GHz]으로 나타남으로써 대표적인 전력기기인 GIS(Gas Insulated Switchgear : 가스절연개폐장치)에서 UHF 대역을 이용한 절연진단기술에서 사용하는 주파수 대역에서 사용이 가능함을 확인할 수 있었다.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.365-368
• /
• 2001

현재 운용중인 NTSC송신시스템을 근거로 가까운 장래에 설치되어 운용될 8-VSD DTV전송시스템의 재원을 설계한다. 먼저 아나로그 NTSC와 디지털 8-VSH DTV의 지상파 방송의 경우 최적의 수신전계를 유지할 수 있는 조건을 검토하고, Longley-Rice의 전계강도 산출법을 이용해서 수신을 위한 최소한의 전계강도의 임계값을 산출한다 8-VSH DTV전송은 NTSC 6MHz대역에서 HDTV가 가능하도록 19.39Mbps의 데이타를 고속으로 전송하는데 그 목표fmf 두고 있으므로 무엇보다 송 · 수신점 사이의 전계강도의 최적화는 중요한 문제이므로 8-VSB DTV전송은 NTSC 서비스 커버리지에 비하여 확장되거나 효율적이어야만 한다. 본 연구에서는 산출결과 NTSC가 8-VSH DTV와 동일한 서비스 커버리지를 유지하기 위하여 NTSC VHF에서 DTV UHF로 전환시 필요한 송신출력과 NTSC UHF에서 DTV UHF로의 전환시 필요한 송신출력을 산출한다.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2063-2065
• /
• 1999

PD pulses have about one nanosecond rise time in the $SF_6$ gas insulation. These pulses propagate through GIS chamber to PD sensors in the form of the electromagnetic radiation. In this paper, we investigated the characteristics of disc sensors and monopole antenna, by putting high frequency signals into the test cell in $SF_6$ gas by means of a Ins rise time pulse generator and 60Hz power supply respectively. Also, we measured PD quantity from the needle electrode and the location effect of output terminal beneath the disk sensors.