• Clinics in Shoulder and Elbow
• /
• v.10 no.2
• /
• pp.160-166
• /
• 2007

Purpose: The current study assessed the factors affecting outcomes of primary repair procedures in tears of multiple rotator cuff tendons. Materials and Methods: Among the cases of rotator cuff tears involving two or more tendons receiving operations between 1997 and 2003, The clinical results of 19 cases with more than 2 years follow-up were evaluated by the UCLA score. We evaluated the correlation of trauma, active motion, acromiohumeral distance, tear size, and surface area with the UCLA score using Pearson's linear correlation coefficient (PLCC). Results: UCLA scores increased significantly in all cases, from 9 to 26.1 on average. However, the results were good in 53%, and poor in 47% according to Ellman's criteria. Trauma, active elevation, acromiohumeral distance, and tear size did not correlate with the UCLA score, but the tear surface area was inversely correlated with the score (PLCC=-0.696). Cases with degeneration of the infraspinatus muscle above Goutallier grade III on MRI showed worse results than cases with less degeneration. Conclusion: The clinical results of primary repair of rotator cuff tears involving multiple tendons were satisfactory in 53% of patients. Large tear surface area and severe degeneration of the infraspinatus were poor prognostic factors.

• Journal of Trauma and Injury
• /
• v.30 no.2
• /
• pp.25-32
• /
• 2017

Purpose: The use of computed tomography (CT) to evaluate acute abdominal complaints has increased over the past two decades. We investigated how the clinical practice of patients with intestinal perforation has changed with the increasing use of abdominal CT in the emergency department (ED). Methods: We compared ED arrival to CT time, ED arrival to surgical consultation time, and ED arrival to operation time according to the method of diagnosis from 2003-2004 and 2013-2014. Results: In patients with gastrointestinal perforation, time from ED arrival to CT was shorter ($111.4{\pm}66.2min$ vs. $199.0{\pm}97.5min$, p=0.001) but time to surgical consultation was longer ($135.1{\pm}78.8$ vs. $77.9{\pm}123.7$, p=0.006) in 2013-2014 than in 2003-2004. There was no statistically significant difference in time to operation for perforation confirmed either by plain film or CT between the two time periods. There was no statistically significant difference in length of hospital or ICU stay or mortality between the two groups. Conclusion: With the increasing use of abdominal CT in ED, ED arrival to CT time has decreased and ED arrival to surgical consultation time has increased in gastrointestinal perforation. These changes of clinical performance do not delay ED arrival to operation time or adversely influence patient outcome.

• The korean journal of orthodontics
• /
• v.54 no.1
• /
• pp.59-68
• /
• 2024

Objective: To investigate the long-term effects of maxillary skeletal expander (MSE) treatment on functional breathing. Methods: Objective measures of breathing, the peak nasal inspiratory flow (PNIF), and peak oral inspiratory flow (POIF), and subjective measures of breathing, the visual analog scale (VAS) and nasal obstruction symptom evaluation (NOSE) survey, were used to investigate the long-term effects of MSE in functional breathing. Seventeen patients, mean age 19.4 ± 3.9 years treated at the UCLA Orthodontics Clinic were assessed on their functional breathing at 3 timepoints: pre-expansion (T0), post-expansion (T1), and post-orthodontic treatment (T2). Results: Immediately after expansion (T1), all the objective functional breathing values were significantly increased in comparison to T0 (P < 0.05). The VAS total, VAS right and VAS left were significantly lower at T1 in comparison to T0 (P < 0.05). At 26.8 ± 3.9 months after MSE expansion (T2), PNIF total, PNIF right, PNIF left, and POIF were significantly higher when compared to T0 (P < 0.05). Also, VAS total, VAS right and VAS left were significantly lower at T2 when compared to T0 (P < 0.05). Additionally, there was a positive correlation between PNIF and the magnitude of expansion at anterior nasal spine and zygomaticomaxillary point (ZMA). There was a positive correlation between total VAS and the magnitude of expansion at the ZMA. There were no significant changes for the NOSE subjective breathing measurement at all time comparisons. Conclusions: Overall, MSE treatment produces an increased objective and subjective airway improvement that continues to remain stable in the long-term post expansion.

• The Bulletin of The Korean Astronomical Society
• /
• v.33 no.1
• /
• pp.28.2-28.2
• /
• 2008

• Bulletin of the Korean Space Science Society
• /
• 1999.09a
• /
• pp.26-26
• /
• 1999

No Abstract, See Full Text

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.4
• /
• pp.389-403
• /
• 2010

Titanium and gold-alloy abutments have been used for a long-time in the clinical situations, but the use of zirconia abutments also increased. This study was designed to compare and evaluate the microgap differences according to types of abutment and dynamic loading. Titanium abutment, zirconia abutment and gold-alloy abutment (UCLA plastic) were connected into titanium implants of external hexagonal structure US II ${\phi}$ $3.75{\times}11.5$ mm (Osstem Co., Seoul, Korea) with the tightening torque of 30 Ncm. A sine type dynamic loading of 25-250 N and $30^{\circ}$ inclination from long axis was applied for $10^5$ times. Using the SEM both before and after the loadings, implant-abutment interfaces were analyzed on the labial, palatal, mesial and distal surface. The microgaps before and after the loading were compared, no statistically significant difference was observed caused by the dynamic loading on the labial, palatal, mesial or distal surface. Statistically significant difference was observed between UCLA and titanium group and between UCLA and zirconia group on both before and after the loading(p<0.05). No statistically significant difference was found between titanium and zirconia group. Loadings for $10^5$ times did not show significant effect to the microgaps between implants and abutments.

• Clinics in Shoulder and Elbow
• /
• v.13 no.2
• /
• pp.181-187
• /
• 2010

Purpose: To determine clinical results for arthroscopic repair of a full-thickness rotator cuff tear using a suture bridge technique. Materials and Methods: Between November, 2007 and October, 2008, we evaluated 90 cases of arthroscopic middle, large rotator tear cuff repair. The mean follow-up period was 15 months (range, 12-23 months). Forty-three cases had medium-sized tears; 47 cases had large-sized tears. At the preoperative stage and again at last follow-up, functional results were assessed by the KSS, ASES, UCLA and the PVAS (Pain visual analogue score). Results: Pain score improved from 2.56 preoperatively to 0.96 at final follow-up; movement scores improved from 6.94 to 1.70. At. final follow-up, the average UCLA score improved from 17.08 to 31.17 with 31 excellent (34%), 49 good (54%) and 10 poor results (12%). The final UCLA score was 31.47 in the group less than 60 years of age and 30.69 in the group over 61 years of age (p=0.344). The UCLA score was 31.23 in those with medium-sized tears and 31.11 in those with large-sized tears (p=0.924). The UCLA score was 31.10 in non-trauma patients and 31.23 in trauma patients (p=0.929). Conclusion: Arthroscopic repair of a full-thickness rotator cuff tear using a suture bridge technique can produce excellent clinical results. These outcomes are not affected by age or trauma history.

• Journal of the Korean Society of Food Culture
• /
• v.23 no.6
• /
• pp.705-712
• /
• 2008

In this study, Jeonju bibimbap, Bulgogi, Japchae, Whangpomuk, Kimchijeyukbokkeum, and Sangseonjeon were selected as examples of take-out style Korean foods, and sensory evaluations on a 9-point hedonic scale were conducted with dining staff at UCLA. 54.5% of the respondents in this study were male and 62.7% were Hispanic/Latino, with the respondents fairly evenly split across age groups in a range of 25-54 years. In the sensory evaluation, the most acceptable items were judged as follows: Bulgogi (8.1)>Japchae (7.5)>Sangseonjeon (7.4)>Jeonjubibimbap=kimchijeyukbokkeum (7.3)>Whangpomuk (6.9). Among the 6 Korean foods (Jeonjubibimbap, Bulgogi, Japchae, Whangpomuk, Kimchijeyukbokkeum and Sangseonjeon), Bulgogi, and Saengseonjeon were the most acceptable items for the female and male respondents, respectively. All of the items were popular with the majority of the responding age groups, with the exception of the 18-24-year groups; in particular, Kimchijeyukbokkeum and Bulgogi scored relatively high on acceptability (7.0) for all respondents. Jeonjubibimbap, Japchae, Whangpomuk, and Saengseonjeon were also found to be acceptable to all respondents except for the African American respondents. We suggest that the Korean foods listed above are applicable items for quick service restaurants in the U.S. market.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.4
• /
• pp.451-465
• /
• 2003

Statement of problem : Recently various implant components such as premachined gold cylinder, plastic cylinder gold UCLA abutment and plastic abutment were developed and used clinically without clinical investigation. Purpose : The purpose of this study was to evaluate the effects of fabrication of gold cylinder on the fitness and preload of the standard abutment and also the effects of fabrication of UCLA gold abutment on the fitness and stress transfer around the implant fixture. Material and method : Three kinds of gold cylinders such as, as-received gold cylinder (Nobel Biocare, Sweden), gold cylinder after casting, and plastic cylinder after casting with type IV gold alloy were tested over the top of the standard abutment. At the same time, three types of abutments such as, gold UCLA abutment before and after casting, and plastic abutment after casting were tested. The cylinder and abutment was secured over the fixture with conventional pre-load values using an electronic torque controller (Nobel Biocare, Sweden). The fitness of the abutment on the fixture and gold cylinder over the standard abutment were measured using the microhardness tester (MXT 70, Matsuzawa, Japan). Preload and the strain values were recorded using the strain balance unit (SB-10, Measurement group, Raleigh, USA) and strain indicator (P-3500, Measurement group, Raleigh, USA) systems. Results and conclusion : 1. Significant differences were found in the fit between the gold cylinder and plastic cylinder. 2 There were significant differences between the preload of the gold cylinder and that of the plastic cylinder. 3. Significant differences were found in the fit between the gold UCLA abutment and plastic UCLA abutment. 4. There were no significant differences in the stress generated on the supporting structure of the fixture among different cylinder and abutment groups.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.1
• /
• pp.46-52
• /
• 2014

PURPOSE. The aim of this study was to evaluate the interface accuracy of computer-assisted designed and manufactured (CAD/CAM) titanium abutments and implant fixture compared to gold-cast UCLA abutments. MATERIALS AND METHODS. An external connection implant system (Mark III, n=10) and an internal connection implant system (Replace Select, n=10) were used, 5 of each group were connected to milled titanium abutment and the rest were connected to the gold-cast UCLA abutments. The implant fixture and abutment were tightened to torque of 35 Ncm using a digital torque gauge, and initial detorque values were measured 10 minutes after tightening. To mimic the mastication, a cyclic loading was applied at 14 Hz for one million cycles, with the stress amplitude range being within 0 N to 100 N. After the cyclic loading, detorque values were measured again. The fixture-abutment gaps were measured under a microscope and recorded with an accuracy of ${\pm}0.1{\mu}m$ at 50 points. RESULTS. Initial detorque values of milled abutment were significantly higher than those of cast abutment (P<.05). Detorque values after one million dynamic cyclic loadings were not significantly different (P>.05). After cyclic loading, detorque values of cast abutment increased, but those of milled abutment decreased (P<.05). There was no significant difference of gap dimension between the milled abutment group and the cast abutment group after cyclic loading. CONCLUSION. In conclusion, CAD/CAM milled titanium abutment can be fabricated with sufficient accuracy to permit screw joint stability between abutment and fixture comparable to that of the traditional gold cast UCLA abutment.