• Journal of Sensor Science and Technology
• /
• v.24 no.4
• /
• pp.239-246
• /
• 2015

Blood pressure is possible to diagnose a disease associated with blood pressure and judgment the current health of patients. Automatic blood pressure monitor capable of measuring a blood pressure easily in hospital and at home have become spread. In this study, we developed the blood pressure simulator (BPS) that can test the arm-type automatic blood pressure monitor that is commonly used in hospital. BPS is to produce a pressure similar to the pressure wave generated in the human blood using a servo disk motor. Then, using the silicon tube, it implements the situations such as human blood vessels, and to output the generated pressure waveform. Simply the BPS's phantom put on the cuff and it is able to simulate blood pressure. So anyone can quickly test the blood pressure monitor within one minute and it is possible to shorten the test time required for the automatic blood pressure monitor. In Performance test, the trends and the standard deviation of the values measured in the BPS is similar to the value of the measured pressure from people with normal blood pressure. Thus, the development BPS showed a possibility of taking into account the actual blood pressure measurement environment simulator.

• Journal of the Korea Concrete Institute
• /
• v.29 no.3
• /
• pp.315-322
• /
• 2017

The purpose of this study is to investigate experimentally the construction performances and economical evaluation of the self-compacting concrete in actual site work after selecting the optimum mix proportions according to cementitious materials. Slag cement type of 46.5% slag powder and belite cement of 51.4% $C_2S$ content, lime stone powder as binders are selected for site experiment including water cement ratio. Also, test items for optimum mix proportion are as followings ; (1) Slump flow, 500 mm reaching time, V-type flowing time and U-box height (2) Setting time, bleeding, shortening depth and adiabatic temperature rising (3) Mixing time in plant (4) Concrete quantity and cost, quality control in actual concrete work. As test results, (4) Optimum water-cement ratio ; Slag cement type 41.0% and belite cement 51.0% (2) Setting time and bleeding finishing time of slag cement are faster, bleeding content of slag cement is higher, shortening depth and adiabatic temperature rising of belite cement type are lower (3) Optimum mixing time in batcher plant is 75 seconds and concrete productive capacity is about $100{\sim}110m^3/hr$. (4) Belite cement type is lower than slag cement type in material cost 14.0%, and concrete quantity in actual concreting work save 3.3% in case of belite cement type. Therefore, self-compacting concrete of belite cement type is definitely superior to that of slag cement type in various test items without compressive strength development.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.10
• /
• pp.49-56
• /
• 2013

The use of geothermal energy has been increased for economic and environmental friendly utilization. Ground thermal conductivity and borehole thermal resistance are very important parameters in the design of geothermal heat pump system. This paper presents an experimental study of heat exchange rate of U and W type ground heat exchangers (GHEs) measured by thermal performance tests (TPTs). U and W type GHEs were installed in a partially saturated dredged soil deposit, and TPTs were conducted to evaluate heat exchange rates under 100-hr continuous operation condition. The heat exchange rates were also calculated by analytical models to estimate borehole thermal resistances and were compared with experimental results. It comes out that multi-pole and equivalent diameter (EQD) models resulted in more accurate agreement than shape factor (SF) model which is currently more often used.

• Physical Therapy Korea
• /
• v.27 no.3
• /
• pp.199-205
• /
• 2020

Background: The classification of foot type can be commonly determined by the height of the media longitudinal arch. The normalized arch height (NAH) is defined as the ratio of navicular or instep heights to the foot length or instep length. Objects: This study investigated the relationships among foot characteristics, such as foot length (FL), instep length (IL), navicular height (NH), and instep height (IH), in Korean young adults. Also, the distribution of foot type based on calculated NAH was assessed. Methods: Three-dimensional foot scanning data of young adults aged 20 to 39 years (total: 1,978; 974 male, 1,004 female) were obtained from the Korea Technology Standards Institute, and used for analyses. NAH was calculated as the following: NH/FL, IH/FL, IH/IL, NH/IL. Spearman's rank order correlation was used to identify correlations among variables. The Mann-Whitney U-test and chi-square test were used to compare the sex differences in foot characteristics and distribution of foot type. Results: FL and IL showed a very high correlation (r = 0.94). The correlations between FL or IL and IH (r = 0.50-0.57) were greater than those between FL or IL and NH (r = 0.23-0.72). Males had significantly larger values than females (p < 0.001), and the frequency of pes planus was significantly higher in females than in males (χ² = 50.09, p < 0.001). Based on the IH/IL index, the neutral foot, pes planus and pes cavus distributed by 16%, 78%, and 6% respectively. Conclusion: Our results on foot arch distribution could be used as basic data in clinical or footwear fields, and our data on differences in arch structure according to sex may facilitate understanding of why injury to the lower limbs differs between males and females.

• Journal of the Korean Home Economics Association
• /
• v.42 no.9
• /
• pp.111-134
• /
• 2004

The purpose of this dissertation is firstly to examine the level of pro-environmental behavior of urban employed wives depending on their life style type and secondly to identify effective ways to promote their pro-environmental behavior. A structured questionnaire interview was conducted with 700 urban employed wives who lived in the Seoul Metropolitan area, and 566 of the responses were valid for analysis. For statistical analysis, this research reviewed the frequencies, percentage, mean, standard deviation(SD), Pearson's correlations, Cronbach's u, factor analysis, cluster analysis, ANOVA, $\chi$$^2$-test, Duncan's Multiple Range Test, and multiple regression using SPSS/PC WIN. The findings of analysis of the study are as follows: 1. Among life style types of employed wives, the order of ecological value was orientation type (37.3%), followed by economical value orientation type (25.8%), uninterested type (18.7%), and convenience-centric value orientation type (18.2%).Pro-environmental behavior scored relatively highly at 3.45 in average. 2. In the analysis of the relationship between life style and background variations, every variation except environmental knowledge was meaningful. 3. In the relationship between pro-environment behavior and background variations, every variation was meaningful except housing types, having helper or not, and environmental knowledge. 4. The recognition level of environmental pollution was important among the variations affecting pro-environmental behavior. 5. There was a difference in pro-environmental behaviors by the following life style types: ecological value orientation, economical value orientation, convenience centric orientation and uninterested. 6. For the relative contribution comparison of background variations (socio-economic variation and environmental variation) and life style variations to the pro-environmental behavior of urban empolyed wives, this research additionally applied each independent variable group. As a result, the explanation level drastically increased in the third step that analyzed the relationship with life style.

• Journal of Astronomy and Space Sciences
• /
• v.39 no.2
• /
• pp.43-50
• /
• 2022

The unified scheme of Seyfert galaxies hypothesizes that the observed differences between the two categories of Seyfert galaxies, type 1 (Sy1) and type 2 (Sy2) are merely due to the difference in the orientation of the toroidal shape of the obscuring material in the active galactic nuclei. We used in this paper, a sample consisting of 120 Seyfert galaxies at 1.40 × 10⁹ Hz in radio, 2.52 × 10¹⁷ Hz in X-ray and 2.52 × 10²³ Hz in γ-ray luminosities observed by the Fermi Large Area Telescope (Fermi-LAT) in order to test the unified scheme of radio-quiet Seyfert galaxies. Our main results are as follows: (i) We found that the distributions of multiwave luminosities (L_radio, L_X-ray, and L_γ-ray) of Sy1 and Sy2 are completely overlapped with up to a factor of 4. The principal component analysis result reveals that Sy1 and Sy2 also occupy the same parameter spaces, which agrees with the notion that Sy1 and Sy2 are the same class objects. A Kolmogorov-Smirnov test performed on the sub-samples indicates that the null hypothesis (both are from the same population) cannot be rejected with chance probability p ~ 0 and separation distance K = 0.013. This result supports the fact that there is no statistical difference between the properties of Sy1 and Sy2 (ii) We found that the coefficient of the best-fit linear regression equation between the common properties of Sy1 and Sy2 is significant (r > 0.50) which plausibly implies that Sy1 and Sy2 are the same type of objects observed at different viewing angle.

• 전기의세계
• /
• v.23 no.4
• /
• pp.60-65
• /
• 1974

This paper is to study on the pilot work of bi-directional S.C.R. power converter adopted by the method of diode-bridge type circuit. This apparatus acts as a converter when it is used in convering 3-phase a.c source to d.c output, and it can be used as an inverter which recovering surplus d.c power to a.c source when d.c load become active to cause the induced voltage higher than the presetted point of d.c output voltage. At the same time, its d.c voltage varies continuously in the presetted range of positive and/or negative polarity. As a result of test, the AC/DC bi-directional power converter represents maximum converting efficiency of 91% and power factor of 0.98. Furthermore, this converter also can be applied as a cycleconverter by varying the period of gate triggering signal.

• Environmental Mutagens and Carcinogens
• /
• v.16 no.2
• /
• pp.117-123
• /
• 1996

This study was carried out to examine the mechanism of Arsenic cytotoxicity through several in vitro test systems. Dose-dependent decrease of cell survival by Arsenic was observed by colony forming assay. Arsenic was weak mutagenic in inducing HGPRT point mutation in CHO cells. The frequency of chromosomal aberrations increased in a dose-dependent manner and the most frequent type of chromosomal aberrations induced by Arsenic were chromatid type deletions. U!trafiltrates of culture media from CHO cells treated with Arsenic induced sister chromatid exchanges(SCE) in CHO cells and Arsenic was able to induce lipid peroxidation in CHO cells. The results suggested that the ultrafiltrates of media from CHO cells treated with Arsenic contain clastogenic factor(CF) and Iipid peroxidation might be involved in the formation of CF.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.593-596
• /
• 1992

An evaluation method for the effective length of electromagnet - which bas U-shape in frontview and trapezoidal in side view - is presented. Using 2D FEM, 2 analysing models are introduced for calculating effective length of the magnet ; the front model is using the normalized equi-pole face area of the magnet and the side model using the normalized equi-magnetic circuit. The ratio of the effective length to the length of bottom plate (core) comes out 1.25 - 1.30. In addition, 3D FEM analysis has been done and a proto-type test model is manufactured to verify the analysing method. The ratio by the experiment appears 1.2, which is reasonably in good agreement with the suggested numerical results.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.04a
• /
• pp.101-106
• /
• 1996

In this study, filling performance of concrete is investigated experimentally for the developmenmt of the concrete to be used in concrete filled steel tubular columns with inner diaphrams. Water-cement ratio with 3 levels, unit water contents with 5 levels, unit coarse aggregate contents with 5 levels, and slump flow with 3 levels are selected for test variables. For the estimation of the filling properties of the concrete, slump flow, V-type funnel time, U-type box height are measured and compared. A device which simulates the steel tubular column is designed and three kinds of concrete are tested with it. As the results, the filling performance is decreased with increasing coarse aggregate content. And, within the scope of this study, concretes with coarse aggregate content less than 880 kg/$\textrm{m}^3$ show good filling performance. To prevent excessive settlement of the concrete pumped into the steel tubular column, slump flow should be controlled within the limited range.