• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.2869-2871
• /
• 1999

본 연구는 포항제철 STS 냉연공장의 형상 제어에 관한 것이다 당사의 냉간 압연기는 Sendzimir mill로서 상하 롤(Roll)이 10단씩 구성된 20단 압연기이다. 본 압연기에 의한 575 냉연강판의 형상제어는 현재 조업자의 수동운전으로 구동되고 있으며 구동기는 AS_U Roll 8 개와 Intermediate Roll 2 개의 10 개로 구성되어 있다. 구동기의 특성은 solenoid 형태와 유압식으로서 응답성이 빠르지 뭇하다. 본 연구는 위와 같은 특성을 지닌 냉간 압연기를 가지고 퍼지 제어에 의한 자동제어의 구현에 관한 것이다. 본 연구에 사용된 퍼지 제어기는 형상 강판의 두께 Roll 속도, AS_U Roll과 IMR의 현 위치 강종 강판의 폭, 강판의 장력 등의 입력을 고려하여 제어기의 출력인 AS_U Roll 8 개의 위치 값과 IMR 2 개의 위치 값을 결정한다. 현재 실 프로세서에 적용중이며 형상제어 정도가 양호하다. 본 연구의 효과는 형상제어의 자동화 및 형상 정도 향상을 통한 조업 안정화에 있다.

• Transactions of Materials Processing
• /
• v.3 no.3
• /
• pp.347-358
• /
• 1994

The purpose of the study is to form $\Omega$-type bellows without any defect by specific rollers which are designed based on the volume distribution technique. In the present paper, we proposed a forming process of existing U-type bellows to a value-added $\Omega$-type in a progressive manner. It was developed to shape a perfect $\Omega$-type bellows after preforming from initial U-type bellows to final U-type bellows. To examine the suggested 'processing condition design' some experiments were performed in a real scale. It was found out that the spring back effect played a major role in deviating the geometry of formed bellows from the predicted one. The problems found in the experiment can be used as important information in manufacturing equipment for forming $\Omega$-type bellows.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1400-1405
• /
• 2001

In this study, an analysis program to assess the susceptibility of steam generator tubes due to the flow-induced vibration was developed. Analysis of fluid-elastic instability and random turbulence excitation for the U-tube bundle in CE-type steam generator was accomplished. The effective mass distribution along the U-tube was obtained to calculate the natural frequency and dynamic mode shape. Finally, stability ratios and rms vibration amplitude for selected tubes are obtained.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.751-753
• /
• 2010

본 논문에서는 위상차 현미경 영상 내 U87 세포의 정확한 형태학적 분류를 위한 이진 분류기 구축 방법을 제안한다. 본 방법은 Fourier descriptor 기반 세포형상 표현을 SVM 이진분류기 구축에 사용함으로써 분류 대상인 원추형과 원형세포에 대해 영상 내 세포의 위치와 회전, 크기의 변화에 대해 강인한 분류성능을 제공한다. 본 실험을 통해 polynomial 커널에서 학습된 SVM 분류기가 linear, RBF, sigmoid 에 비교하여 가장 정확한 분류 성능을 보임을 확인하였다. 본 연구는 논문상 기준인 두 종류의 세포 형태 분류기를 기반 프레임워크로 삼아 좀더 다양한 세포 형태를 분류할 수 있도록 개선된다면 악성뇌종양의 전이억제치료에 효과적인 전이행동분석에 도움을 줄 수 있을 것으로 기대된다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.19 no.1
• /
• pp.51-56
• /
• 1983

In the stability problem of the U-grooved plate, it has a circular hole, the site of the hole determines some different deformation mode when it was loaded. To determine the optimal position of the circular hole-center which not to get large distortion of the hole itself, in this paper, we studied the distributions of stresses in the neck area between hole and U-groove and the distortion mode of the deformed hole by B.E.M(Boundary Element Method) and compared with experimental results in four cases. For a distributed load, according to the center of the hole moves closer to the U-groove center (c.-c. line), the shape of the circular hole was transformed to the elliptical one(it's major axis perpendicular to the c.-c. line). In this problem, the results by Boundary Element Method was well accorded with Experiments.

• Journal of the Korean Solar Energy Society
• /
• v.25 no.1
• /
• pp.19-25
• /
• 2005

All-glass evacuated tube solar collectors consist of glass evacuated tubes and absorber tubes. Solar thermal energy from the sun is transferred to the working fluid through the glass evacuated tube and the absorber tube. Several collectors which have different absorber tubes are tested to find the effects of the absorber tube shapes and the operating conditions such as the incident heat flux and the flow rate. As the results, the efficiency of the collector which has a finned tube U tube is about $2{\sim}5%$ higher than that of the others in all cases on an average. And the collector has a finned U tube has the highest efficiency at the high flow rate and the low incident heat flux. In this condition, the outlet mean temperature is low and the heat loss becomes small. Also, it is known that the fin effect is greater than the shade effect.

• Advances in concrete construction
• /
• v.2 no.4
• /
• pp.281-300
• /
• 2014

This study presents the experimental results of twenty three reinforced concrete beams with rectangular web openings externally strengthened with Fiber Reinforced Polymers (FRP) composites bonded around openings. All tested beams had the same geometry and reinforcement details. At openings locations, the stirrups intercepted the openings were cut during fabrication of reinforcement cage to simulate the condition of inclusion of an opening in an existing beam. Several design parameters are considered including the opening dimensions and location in the shear zone, the wrapping configurations, and the amount and the type of the FRP composites in the vicinity of the openings. The wrapping configurations of FRP included: sheets, strips, U-shape strips, and U-shape strips with bundles of FRP strands placed at the top and sides of the beam forming a fan under the strips to achieve closed wrapping. The effect of these parameters on the failure modes, the ultimate load, and the beam stiffness were investigated. The shear contribution of FRP on the shear capacity of tested beams with web openings was estimated according to ACI Committee 440-08, Canadian Standards S6-06, and Khalifa et al. model and examined against the test results. A modification factor to account for the dimensions of opening chords was applied to the predicted gain in the shear capacity according to ACI 440-08 and CSA S6-06 for bonded Glass Fiber Reinforced Polymers (GFRP) around openings. The analytical results after incorporating the modification factor into the codes guidelines showed good agreement with the test results.

• Journal of Fashion Business
• /
• v.12 no.6
• /
• pp.81-92
• /
• 2008

The purpose of this study is to develop the applied brassiere pattern of women which are fitting for 75A. The constructing of this experimental brassiere were lower cup, upper cup, front panel and U-wing as well as a full cup embcing the entire breasts. Basing on the bra model from domestic experiment results, development of an applied design, round side type pattern, has been suggested. Thus, suggesting the round variation design bra, which is an applied design based on the basic model based on the breast volume. Based on the sizes that are in reference to Size Korea (2004) and related previous researches, the basic model that has been experimented with 11.4% polyurethane and 88.6% Nylon as the materials, has been selected as the model of research. This takes 75A, the size of which is set according to the underbust circumference and the breasts circumference, as the basic model. It is an application in terms of design, and there is no change to the cup volume or size because it has been moved only from the cutting line. The applied design changes the right side of the lower cup into an easily-movable form and attaches it to the upper cup, and the lower cup takes the right part of the upper cup to form a cup shape of round variation design. It also changes basic straight form of the wings, and alters them into U-shape.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.10 no.2
• /
• pp.140-148
• /
• 1999

The use of obturator is the prosthetic rehabilitation approach for restoration of the defected maxillary shape and function for the patients with palatal defect. The obturator can change the shape of vocal tract and nasality, but few reports on the effects of the change were presented. So, the authors performed the experimental study to compare the difference between the sizes of vowel triangles produced by maxillectomized patients before and after obturator-wearing and to consider how much improvement in speech intelligibility can be expected by obturator wearing. The 8 patients who were totally maxillectomized due to palatal cancer were participated as subjects. They produced 5 vowels(/a/, /i/, /u/, /e/, /o/) before and after obturator-wearing. The formants of the vowels were analyzed by the spectrogram of CSL, and their speech intelligibility were judged by normal 8 listeners. As results, the frequency of the first and the second formant showed no significant difference between the articulation before and after wearing, but the comparison of the sizes of vowel triangles, related with the speech intelligibility, showed significant difference. The vowel triangle of the articulation after wearing was larger than that of the articulation before wearing. /i/ showed the lowest speech intelligibility score among the vowel articulation before wearing. After wearing obturators, their scores increased on the whole, especially, in /a/, but the intelligibility of /u/ decreased after wearing.

• Journal of Korea Planning Association
• /
• v.54 no.3
• /
• pp.15-26
• /
• 2019

The development of science and transportation technology leads to the increase of inter - city networks that play an important role in urban growth. Overall, numerous studies based on network theory pay attention to positive effects of urban network on urban growth. However, some studies have pointed out the negative effects of inter-city interactions such as straw effects. This implies that the network between cities may not be positively correlated with urban growth, and that the direction of the influence may vary from a certain threshold, such as the marginal utility curve. In this context, the purpose of this study is to measure the impacts of network with central city on urban growth in the capital region and examine the relationship between urban network and growth. Two multiple regression models are employed with changes in population and employment as dependent variables. The urban network index and other control variables are used as independent variables. Especially, the urban network indexes are used in quadratic forms to examine non linear relations with urban growth such U-shape or an inverted U-shape. The results show that the relationships between networks with the central city and urban growth are not a simple linear, and the influence can be changed from the critical point.