• Geophysics and Geophysical Exploration
• /
• v.24 no.1
• /
• pp.20-27
• /
• 2021

Subsurface rock produces heat from the decay of radioactive isotopes in constituent minerals and gamma-ray emissions, of which the magnitude is dominated by the contents of the major radioactive isotopes (e.g., U, Th, and K). The heat production is generally calculated from the rock density and contents of major isotopes, which can be determined by mass spectrometry of drilled core samples or rock fragments. However, such methods are not easily applicable to deep boreholes because core samples recovered from depths of several hundred meters to a few kilometers are rarely available. A geophysical logging technique for boreholes is available where the U, Th, and K contents are measured from the gamma-ray spectrum. However, this technique requires the density to be measured separately, and the measurement depth of the equipment is still limited. As an alternative method, a normal gamma-ray logging tool was adopted to estimate the heat production from the total gamma activity, which is relatively easy to measure. This technical report introduces the development of the proposed method for evaluating the heat production of a granitic rock mass with domestic commercial borehole logging tools, as well as its application to a ~2 km deep borehole for verification.

• Resources Recycling
• /
• v.14 no.2
• /
• pp.43-55
• /
• 2005

As world population increases and the world economy expalds, so does the demand for natural resources especially strategic metals such as cobalt. An accurate assesment of the nation's minerals must include not only the resources available in the ground but also those that become available through recycling. In this paper, data on domestic and international supply of cobalt and its applications by end-user were analyzed for stable security of cobalt resources and effective recycling of cobalt scraps. Also, an initial evaluation of the flow of cobalt-containing materials in the United States was prepared. In 2003, 8,000 metric tons of cobalt were consumed in the United States and an estimated 28% of U.S. cobalt supply was derived from scrap. The superalloy industry and catalyst industries have well-established recycling or cobalt recovery practices. Recycling rates of cobalt scraps from magnet alloy and cemented carbide were relatively low.

• Economic and Environmental Geology
• /
• v.41 no.3
• /
• pp.287-297
• /
• 2008

In order to estimate the preliminary development feasibility according to the commodity, the content of 8 strategic metallic commoditites(Pb, Zn, Cu, Fe, Mo, W, Au, U) in 68 ore specimens obtained from 34 metallic mines within the Taebaegsan-Hwanggangri mineralized zone were analyzed. Analytical results are as follows. The ore specimen of Sangdong mine contained 23% copper(cut-off grade=0.7%) and those of Cheongil and Samhwanghak mines contained average 5% zinc(cut-off grade=2.0%). Especially, the detailed investigation on the above-mentioned mines is required. And, in case of molybdenum(cut-off grade=0.02%) content in Yeonhwa No. 2(0.04%) and Hong-cheon mine(0.02%), and lead(cut-off grade=0.58%) content in Wongasa mine(0.70%), and gold(cut-off grade=10ppm) content in Dongmyoung(279ppm) and Samhwanghak mine(251ppm), it is required to elastically carry out the revaluation on reopening of mines in terms of the international metal price. On the other hand, in case of uranium, iron and tungsten, it is thought that there are no mines with the development potential value in this study.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.2
• /
• pp.220-226
• /
• 1998

This study was undertaken to analyze proximate comosition, mineral contents and fatty acid composition of pure jemsosojoo(PJ) and jemsosojoo added medicinal herb(JMH). Mositure, ash, crude protein and crude fat of pure jemsosojoo were higher than those of the JMH, but carbohydrate content was higher in the JMH. Among minerals, Ca, Mg, Fe, Zn content of the JMH were higher than those of the PJ, while P and Na were higher in the PJ and those difference were significant between the PJ and the JMH(p<0.05). U/S (unsaturaed fatty acid/saturated fatty acid) ratio was higher in the JMH than those of the PJ, the ratio o fglycolipid was 1.75 in the PJ and that of neutral lipid was 3.07 in the JMH. Octadecenoic acid, hexadecanoic acid, octadecenoic acid and hexadecenoic acid were major fatty acids in the total lipids, neutral lipids glycolipids and phospolipids of the PJ and the JMH. Especially, octadecadienoic acid and octadecatrienoic acid were higher in the JMH than those of the PJ.

• The Journal of Engineering Geology
• /
• v.23 no.4
• /
• pp.399-407
• /
• 2013

Some groundwater in Korea contains high U concentrations, especially where two-mica granite occurs in the Daejeon area. The elemental U in the two-mica granite is lower than that in normal granites elsewhere in the world, and U-minerals have yet to be reported in the two-mica granite in the Daejeon area. This study focuses on investigating the occurrence of U-minerals serving as the U source in groundwater. In situ gamma ray spectrometry and mineralogical analyses using EPMA were performed. U-count anomalies were identified in a granitic dyke and in hydrothermally altered granite. Uraniferous granitic dykes occur along the contact zone between the two-mica granite and mica-schist. The uraniferous parts within the two-mica granite are developed in the hydrothermally altered zone, which contains numerous quartz veinlets within a fracture zone. Hydrothermal alteration is dominated by potassic and prophylitic alteration. Uraninite is a common U-mineral in granitic dykes and hydrothermally altered granite. Coffinite and uranophane occur in the hydrothermally altered granite. All of these U-minerals are commonly accompanied by hydrothermal alteration minerals such as muscovite, chlorite, epidote, and calcite. It is concluded that granitic dyke and hydrothermally altered granite are the main source rocks of U in groundwater.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.3 s.45
• /
• pp.183-194
• /
• 2005

The mineralogical, physicochemical and thermal properties of the Myogi bentonite occurring in Japan were measured. A adsorption properties of U, Th, Ce and Eu ions on the Myogi bentonite were also investigated in different solution concentrations and pH conditions. The Myogi bentonite showed a strong alkaline character (pH 10.4), very high swelling, viscosity property and CEC, and a slow flocculation behavior due to the strong hydrophilic property. By the thermal analysis, the dehydroxylation of crystal water in bulk and clay fractions of the Myogi bentonite occur at $591^{\circ}C$ and $658^{\circ}C$, respectively, The adsorption experiments of ions such as U, Th, Ce and Eu were conducted for 0.2 g bentonites with 20mL solutions of various concentrations and different pH conditions with pH 3, 5, 7, 9, and 11. As a result, the Myogi bentonite showed excellent adsorption capacities for Ce, Th and Eu ions, whereas U ion showed very low adsorption capacity. Generally, Ce, Th and Eu ions showed the similar adsorption properties for the different concentrated solutions and pH conditions. These adsorption properties seem to be affected by the formation of various forms of chemical species and precipitation as well as ionic exchange reaction and surface adsorptions on smectite. Some associated zeolite minerals perhaps have some effects on the adsorption of U, Th, Ce and Eu on Myogi bentonite.

• Economic and Environmental Geology
• /
• v.56 no.2
• /
• pp.115-123
• /
• 2023

We introduce a new 'image-mapping' in-situ U-Pb dating method using LA-ICP-MS, proposed by Drost et al. (2018), and show the characteristics and usability of this method through several examples of absolute age results determined by first applying it to samples from the Joseon Supergroup of the Early Paleozoic Era in Korea. Unlike the previous in-situ spot analysis, this in-situ U-Pb dating method for carbonate minerals can determine the absolute age with high reliability by applying the 'image-mapping' method of micro-sized domains based on micro-textural observation, as well as determine the absolute age of multiple geological 'events' that occurred after deposition. This was confirmed in the case of determining the syn-depositional age and the multiple post-depositional ages from carbonate minerals of the Makgol and the Daegi Formations. Therefore, if the 'image-mapping' in-situ U-Pb dating method is applied to determine the absolute age of various types of carbonate minerals that exist in various geological environments throughout the geologic era, it will be possible to secure new geological age information.

• Proceedings of the KSEEG Conference
• /
• 2005.04a
• /
• pp.314-316
• /
• 2005

• Geosystem Engineering
• /
• v.21 no.5
• /
• pp.262-272
• /
• 2018

The U-statistic method is one of the most important structural methods to separate the anomaly from background. It considers the location of samples and carries out the statistical analysis of the data without judging from a geochemical point of view and tries to separate subpopulations and determine anomalous areas. In the present study, 3D U-statistic method has been applied for the first time through the three-dimensional (3D) modeling of an ore deposit. In order to achieve this purpose, 3D U-statistic is applied on the data (Fe grade) resulted from the drilling network in Baghak mine, central part of the Sangan iron mines (in Khorassan Razavi Province, Iran). Afterward, results from applying 3D U-statistic method are used for 3D modeling of the iron mineralization. Results show that the anomalous values are well separated from background so that the determined samples as anomalous are not dispersed and according to their positioning, denser areas of anomalous samples could be considered as anomaly areas. And also, final results (3D model of iron mineralization) show that output model using this method is compatible with designed model for mining operation. Moreover, seen that U-statistic method in addition for separating anomaly from background, could be very efficient for the 3D modeling of different ore type.

• Geotechnical Engineering
• /
• v.12 no.6
• /
• pp.115-126
• /
• 1996

The purpose of 1,his study is to analyze the compression and strength charactefistics of the decomposed -weathered soil originating from biotite gneiss or fine grained gneiss sampled from Poidong, Seoul : to figure out the behavioural characteristics of the decomposed -weathered soil in accordance with mineral composition and origin by comparing experimental results of residual soils. originating from granites and sampled from Bulam, Andong and Kimchun area. A series of CIU, CID CKoV, CKoD tests were car lied out. Although weathered soils have different origin and mineral composition, the slope of the NCL A was similar. It was also shown that plastic strain ratio was about 85% mainly due to the particle crushing effect during compression. The Poidong soil showed strain softening phenomenon unlike the Kimchun and Andong soils. this implies that the behavioural characteristics are affected by the origin and the mineral composition of the soil particles. Moreover, it was found that the angle of the shear resistance$(\phi')$ was dependent on the mineral composition. On the oher hand, measured Af values of decomposed weathered soils were more than one regardless of the origin and the mineral composition.