• Journal of Advanced Navigation Technology
• /
• v.10 no.4
• /
• pp.342-347
• /
• 2006

In this paper, we have designed 800[MHz] broad band antenna that is improves a narrow bandwidth problem of microstrip antenna and it will be able to integrate GSM, TRS band including the CDMA band. It had L-shaped feeding structure and added the U-slot it used a duplex resonance effect. Also for the improvement of profit the stack it did with the perpendicular. It seems to be good quality that design and manufactured antenna frequency bandwidth(VSWR 2:1) is 789~1086[MHz] with 297[MHz](33%). Also the E-plan and H-plan all profit 9.4[dBi] above, 3[dB] beam width was visible the quality which above $61^{\circ}$ is improved.

• Nuclear Engineering and Technology
• /
• v.51 no.1
• /
• pp.275-283
• /
• 2019

Rare isotope beam facilities require shielding data in early stage of their design. There is much less shielding data on neutrons from the reactions between heavy ion beams and matter than the data on neutrons produced by protons. The purpose of the present work is to produce and thus increase the amount of shielding data on neutrons generated by high-energy heavy ion beams based on the RAON in-flight fragment facility. Calculations were performed with the computational Monte Carlo codes PHITS and MCNPX. The secondary neutron source terms were evaluated at 550 MeV/u for Ca, Kr, and Sn and at 400 MeV/u for U ions on a graphite target. Source terms and attenuation lengths were obtained by fitting the ambient dose equivalent inside an ordinary concrete shield.

• Advances in concrete construction
• /
• v.9 no.3
• /
• pp.235-248
• /
• 2020

Progressive collapse in a structure occurs when load bearing members are failed and the adjoining structural elements cannot resist the redistributed forces and fails subsequently, that leads to complete collapse of structure. Recently, construction using precast concrete technology is adopted increasingly because it offers many advantages like faster construction, less requirement of skilled labours at site, reduced formwork and scaffolding, massive production with reduced amount of construction waste, better quality and better surface finishing as compared to conventional reinforced concrete construction. Connections are the critical elements for any precast structure, because in past, major collapse of precast structure took place because of connection failure. In this study, behavior of four different precast wet connections with U shaped reinforcement bars provided at different locations is evaluated. Reduced 1/3^rd scale precast beam column assemblies having two span beam and three columns with removed middle column are constructed and examined by performing experiments. The response of precast connections is compared with monolithic connection, under column removal scenario. The connection region of test specimens are filled by cast-in-place micro concrete with and without polypropylene fibers. Performance of specimen is evaluated on the basis of ultimate load carrying capacity, maximum deflection at the location of removed middle column, crack formation and failure propagation. Further, Finite element (FE) analysis is carried out for validation of experimental studies and understanding the performance of structural components. Monolithic and precast beam column assemblies are modeled using non-linear Finite Element (FE) analysis based software ABAQUS. Actual experimental conditions are simulated using appropriate boundary and loading conditions. Finite Element simulation results in terms of load versus deflection are compared with that of experimental study. The nonlinear FE analysis results shows good agreement with experimental results.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.5
• /
• pp.125-133
• /
• 2017

A parking structure has been on the spotlight to solve the parking problem in downtown area. However, the overall height of parking structure is stipulated less than 8m. Therefore, in this research, the flexural and shear capacity of 'wide composite beam' which can reduce story height and have long span, is evaluated. Based on test result, the rebar in truss did not affect its flexural strength. However, in the case of the specimen without the rebar, the mechanical bond strength decreased due to slip occurrence at 70% of the flexural yield strength. Based on the test of shear-bond behavior, all specimen without shear connector should be reinforced with 2 or more flat bar, because it did not have enough shear bond strength resisted by the mechanical bond mechanism.

• Physical Therapy Korea
• /
• v.12 no.3
• /
• pp.11-21
• /
• 2005

The present study was aimed at investigating the effect of swimming training on brain function after focal cerebral ischemia in rats. Therefore, this study was examined on neurogenesis in dentate gyrus of hippocampus using 5-bromo-2'-deoxyuridine (BrdU) to label proliferating cells and assessed the neurological response following focal cerebral ischemia in rats using neurological motor behavioral test. In an observer-blinded fashion, twenty male Sprague-Dawley (280~310 g, 7 weeks old) rats were divided into four groups: MCAO plus swimming group (ME, $n_1$=5), MCAO plus control group (MC, $n_2$=5), SHAM plus swimming group (SE, $n_3$=5), SHAM plus control group (SC, $n_4$=5). The results of this study were as follows: 1) The limb placing time before and after swimming in the ME group were significantly longer than the MC group (p<.05), the SE group were significantly longer than the SC group (p<.01). 2) The balance beam scores before and after swimming in the ME group was higher than the SE group, the MC group was higher than the SC group but was not significantly different (p>.001). 3) The foot fault index before and after swimming training in ME group was significantly lower (i.e., improved) than the MC group (p<.001) and the SE group (p<.001), the SE group was significantly lower (i.e., improved) than the SC group (p<.001). 4) The mean number of BrdU-positive cells in the dentate gyrus in the ME group was significantly higher than the MC group (p<.001) and the SE group (p<.01). The MC group and the SE group was significantly higher than the SC group (p<.001). 5) There was significantly correlation between limb placing time and number of BrdU-positive cells on swimming training, there was positive correlation (r=.807, p<.0001) and between foot fault index and BrdU-positive cells number, there was negative correlation (r=-.503, p<.05). However, between balance beam scores and BrdU-positive cells number, there was no correlation. In conclusion, the present study demonstrates that the role of swimming training improves behavioral motor function probably by enhancing cell proliferation in that hippocampus. This study provides a model for investigating the stroke rehabilitation that underlies neurogenesis and functional ability.

• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2629-2639
• /
• 2021

Within the frame of the EMPIrE test, four monolithic mini-plates were irradiated in the ATR reactor. In two of them, the monolithic U(Mo) foil had been PVD-coated with Zr before the plate manufacturing. Extensive microstructural characterizations were performed on a fresh archive mini-plate, using Optical Microscopy (OM), Scanning Electron Microscopy (SEM) combined with Energy Dispersive Spectroscopy (EDS), Electron Backscattered Diffraction (EBSD) and Focused Ion Beam (FIB)/Transmission Electron Microscopy (TEM) with nano EDS. A particular attention was paid to the examination of the U(Mo) foil, the PVD coating, the cladding/Zr and Zr/U(Mo) interfaces. The Zr coating has a thickness around 15 ㎛. It has a columnar microstructure and appears dense. The cohesion of the cladding/Zr and Zr/U(Mo) interfaces seems to be satisfactory. An almost continuous layer with a thickness of the order of 100-300 nm is present at the cladding/Zr interface and corresponds to an oxidized part of the Zr coating. At the Zr/U(Mo) interface, a thin discontinuous layer is observed. It could correspond to locally oxidized U(Mo). This work provides a basis for interpreting the results of characterizations on EMPIrE irradiated plates.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.463-463
• /
• 2011

집속이온빔장치(Foucused Ion Beam)에서 사용하는 액체금속이온원(Liquid Metal Ion Source)은 고 전류밀도, 고 휘도, 낮은 에너지퍼짐 등 많은 장점이 있다. 대부분의 집속이온빔 장치에서 플라즈마 이온소스에 비해 빔의 직경이 작고 GFIS 보다 다루기 쉬워 액체금속이온원을 많이 사용하고 있다. 기존에 사용하던 액체금속이온원에 서프레셔라는 새로운 전극을 추가시켜 팁과 갈륨저장소, 서프레셔, 추출극 구조로 만들었다. 이 연구를 위해 RPA(Retarding Potential Analyser)를 제작 하였다. RPA는 두 개의 메쉬와 하나의 컬렉터로 이루어져 있으며, 액체금속이온과 플로팅 되어있는 RPA에 전압의 차이를 주기위해 베터리로 제작한 파워로 액체금속이온에 인가되는 전압에 + 90V, -90V까지 제어가 가능하게 만들었다. 본 연구에서는 서프레셔의 유무에 따른 액체금속이온원의 에너지 퍼짐에 대해 연구하였다. 추출극에 전압 변화를 주어 방출되는 전류를 5uA, 10uA, 15uA, 20uA로 변화시켜가며 RPA에서 측정되는 전류를 가지고 전류-전압의 관계를 보았고, 에너지 퍼짐정도를 알았다. 마찬가지로 서프레셔에 전압 변화를 주어 전류-전압 관계, 에너지 퍼짐정도를 알았다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.265-268
• /
• 2008

In this paper behavior of U-Channel Bridge (UCB) and the slab design considering construction sequence was studied. The segments of UCB are produced in the factory and transported to the site by trailers, and the segments are fabricated in the construction field. In this sequence the supporting conditions are changed. Four steps that were the segment precasting step, the segment carrying step, the segment placed on the erection beam step, and the completion step were chosen by supporting condition. In each step model using the frame and plate elements was proposed and structural analysis was performed. Four construction steps were to be considered in the process of slab analysis. The design method of slab was proposed considering construction sequence.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.2
• /
• pp.135-142
• /
• 2015

The Anti-Rolling Tank(ART) has an advantage over the other roll stabilizing devices, when ship is staying and working at one site of sea. An important design point of ART is the tank tuning, that is, matching the tank natural period to the ship's roll natural period. Since the load condition and consequently the roll natural period of ship is to be changed widely, the natural period of ART also has to be changed widely. In case of the existing U-tube type ART with a single layer duct, the tank natural period can be changed in a relatively narrow range. This paper suggests a new U-tube type ART system using a double layer duct to enable wide change of ART natural period. Through the roll experiments performed in regular beam waves for a box-type model ship, it is shown that the double layer duct ART has about two times wider period range and a better reducing effect of roll magnitude than the single layer duct ART.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.241.1-241.1
• /
• 2014

The large-area high-power radio-frequency (RF) driven ion sources based on the negative hydrogen (deuterium) ion beam extraction are the major components of neutral beam injection (NBI) systems in future large-scale fusion devices such as an ITER and DEMO. Positive hydrogen (deuterium) RF ion sources were the major components of the second NBI system on ASDEX-U tokamak. A test large-area high-power RF ion source (LAHP-RaFIS) has been developed for steady-state operation at the Korea Atomic Energy Research Institute (KAERI) to extract the positive ions, which can be used for the NBI heating and current drive systems in the present fusion devices, and to extract the negative ions for negative ion-based plasma heating and for future fusion devices such as a Fusion Neutron Source and Korea-DEMO. The test RF ion source consists of a driver region, including a helical antenna and a discharge chamber, and an expansion region. RF power can be transferred at up to 10 kW with a fixed frequency of 2 MHz through an optimized RF matching system. An actively water-cooled Faraday shield is located inside the driver region of the ion source for the stable and steady-state operations of RF discharge. The characteristics and uniformities of the plasma parameter in the RF ion source were measured at the lowest area of the expansion bucket using two RF-compensated electrostatic probes along the direction of the short- and long-dimensions of the expansion region. The plasma parameters in the expansion region were characterized by the variation of loaded RF power (voltage) and filling gas pressure.