• Clinical and Experimental Reproductive Medicine
• /
• 제13권2호
• /
• pp.121-127
• /
• 1986

We have reviewed 59 cases of patients amoung 65 cases who underwent IVF and ET with reasonable indications irom 1984 and the results as follows. 1. Major indications for IVF and ET were tubal factor (40.7%), unexplained infertility (25.4%), endometriosis (15.3%), failed AID and AIH (10.1 %), and sperm abnormality (8.5%). 2. For superovulation of human oocytes, l00mg of clomiphene citrate and 75 IU of HMG used. The monitoring of oocyte maturation was bone by ultrasound examination and serum 17-${\beta}$ estradiol, LH values. The peak $E_2$ value was 956.36${\pm}$702.13 pg/ml. 3. The oocytes were obtained by laparoscopy 24-36 hours after the injection of HCG. 4. The mean numbers of follicles at laparoscopy was 3.06 and the successful rate of laparoscopy was 79.7%. 5. And 165 follicles were aspirated from which 98 oocytes were recovered, 59.4% of all follicles had at least one oocyte aspirated. 21.4% of the eggs were mature, 52.0% were moderate, 26.5%. were immature. 6. 67.3% of oocytes were cleaved and were transferred at 4-6 cell stages. 7. Four pregnancies including one chemical pregnancy and one spontaneous abortion were established by ${\beta}$-subunit, u-hCG and ultrasound examinations.

• 한국태양에너지학회 논문집
• /
• 제31권6호
• /
• pp.95-102
• /
• 2011

The purpose of study is to estimate heating, cooling load performance and economic efficiency in office building with applied the functional paint. this paint can reduced SHGC(Solar Heat Gain Coefficient) on the glazing surface by coating. In this study, estimated to compared with double glazing, low-e glazing, IP(Insulation Paint) and IPu(Insulation UV-Cut Paint) coating glazing. As a result of this study, 1)heating & cooling load Analysis, SHGC value and U-factor of double glazing is about 0.70 and 3.29($W/m^2K$). low-E glazing is about 0.65 and 2.70($W/m^2K$). Two-side it is about 0.27 and 3.25($W/m^2K$). When compared to double glazing, annual heating & cooling load of low-E glazing, Two-side IPu and IP paint coating glazing is 3,012MWh($124kWh/m^2$), 2,910MWh($120kWh/m^2$), 2,867MWh($118.4kWh/m^2$) and 2,867MWh($118.4kWh/m^2$). It i sreduced to 2.0%, 5.2%, 6.7%, and 6.7% respectively. 2)the estimation of economic efficiency, low-e glazing installed in office building can not recover the investment within a lifetime 40years. but IPu and IP paint, two-side coating in glazing, have a payback period of 13 years respectively.

• 한국태양에너지학회 논문집
• /
• 제31권6호
• /
• pp.103-110
• /
• 2011

The aim of this study was to analysis the Heating/cooling performance and Daylighting performance of Solar Window System built in apartments. the solar window is the idea to integrate daylight as a third form of solar energy into a PV/Solar Collector system. The process of this study is as follows: 1)Solar Window system was designed through the investigation of previous paper and work. 2)The simulation program(Lightscape3.2) was used in daylighting performance analysis. the reference model of simulation was made up to analysis daylighting performance on Solar Window system. 3)The simulation program(ESP-r, Therm5.0, Window6.0) was used in energy performance analysis. the reference model of simulation was made up to analysis energy and daylighting performance on Solar Window system. 4)The Size of Simulation model for daylighting and heating/cooling energy analysis was $148.5m^2$ 5)The lighting performance analysis was carried out with various variants, such as the size and installed area of Solar Window system. 6)Energy performance simulation was carried out with various variants, such as Integrated U-value of Solar Window system according to its position, installed angle and insulation thickness. Consequently, When Solar Window system is equipped with balcony window of Apartment, Annual heating and cooling energy of reference model was cut down at the average of $4.1kWh/m^2$ or 4.2%.

• 제어로봇시스템학회논문지
• /
• 제3권6호
• /
• pp.644-651
• /
• 1997

In the water purification plant, chemicals are injected for quick purification of raw water. It is clear that the amount of chemicals intrinsically depends on water quality such as turbidity, temperature, pH and alkalinity. However, the process of chemical reaction to improve water quality (e.g., turbidity) by chemicals is not yet fully clarified nor quantified. The feedback signal in the process of coagulant dosage, which should be measured (through the sensor of the plant) to compute the appropriate amount of chemicals, is also not available. Most traditional methods focus on judging the conditions of purifying reaction and determine the amounts of chemicals through manual operation of field experts using Jar-test data. In this paper, a systematic control strategy is proposed to derive the optimum dosage of coagulant, PAC(Polymerized Aluminium Chloride), using Jar-test results. A neural network model is developed for coagulant dosing and purifying process by means of six input variables (turbidity, temperature, pH, alkalinity of raw water, PAC feed rate, turbidity in flocculation) and one output variable, while considering the relationships to the reaction of coagulation and flocculation. The model is utilized to derive the optimum coagulant dosage (in the sense of minimizing turbidity of water in flocculator). The ability of the proposed control scheme validated through the field test has proved to be of considerable practical value.

• 대한한방체열의학회지
• /
• 제8권1호
• /
• pp.18-25
• /
• 2010

Purpose : This study was performed to compare the characteristics of digital infrared thermographic imaging(DITI) in polycystic ovary syndrome(PCOS) patients with regulary cycling controls. Methods : We studied 19 patients visiting ${\bigcirc}{\bigcirc}$ korean hospital from 7th May 2010 to 8th January 2011. The subjects were categorized in two groups. 8 PCOS patients and 11 healthy regularly cycling controls. We investigated the difference of DITI between two groups by Mann-Whitney U-test using SPSS for window (version 17.0). Results : The average temperatures of five points(In-dang(EX-HN3), GV4, GV6, GV12, GV17) between PCOS and non-PCOS groups showed a little difference though p-value is not less than 0.05. The DITI differences of PCOS group between In-dang and thorax or between In-dang and abdomen showed lower than those of non-PCOS group though not a statistical significant level. Conculsion : The results suggest that DITI differences between PCOS and non-PC OS groups need to be developed to some degree for the diagnosis tool of PCOS.

• 한국지리정보학회지
• /
• 제5권3호
• /
• pp.87-98
• /
• 2002

광주 전남의 상수원인 주암호 유역에 대해 GIS를 이용하여 점오염원과 비점오염원 부하량을 산정하였으며 기 개발된 모형을 이용하여 수질을 모의하였다. 점오염원 부하량은 환경부에서 발표한 원단위(1998)를 이용하여 산정하였고, 비점오염원 부하량은 유출곡선지수를 이용한 SCS방법으로 직접유출량을 계산한 후 우리나라 유역의 특성에 맞는 토지이용별 기대평균농도 값을 이용하여 산정하였다. 수질모의는 미국환경청에서 개발한 WASP모형(2001)을 이용하였으며 대상유역을 GIS를 이용하여 경사, 방향, 고도, 토양, 토지이용과 강우량에 따라 44개의 소유역으로 구분하고, 그중 하나의 소유역에 대해 모형을 적용하였다. 모형의 결과치를 수질관측치와 비교한 결과 매우 유사함을 알 수 있었다.

• 전자공학회논문지CI
• /
• 제39권1호
• /
• pp.14-22
• /
• 2002

분산처리시스템에서 작업의 도착률과 서비스요구, 그리고 서버의 서비스률 등이 네트워크환경에 따라 모호성을 갖는 경우, 시스템의 성능을 평가할 수 있는 퍼지 BCMP 큐잉네트워크모델을 제안하였다. 이 모델은 시스템외부로부터 작업의 진입여부에 따라 개방형 및 폐쇄형으로 분류하고, 퍼지요소들을 처리할 수 있는 퍼지평균값 분석방법을 사용하여 작업평균소요시간, 시스템내 작업수 및 서버 활용률 등의 시스템성능을 평가할 수 있는 측도를 각각 유도하였다. 이들의 유효함을 검증하기 위하여 퍼지 BCMP 큐잉네트워크모델에 작업의 퍼지도착률. 클라이언트 수 및 퍼지서비스 요구에 따른 시스템의 성능분석을 개방형과 폐쇄형으로 각각 시뮬레이션하였다. 그 결과 예측된 시스템의 성능평가와 일치함을 보였다.

• The Journal of Advanced Prosthodontics
• /
• 제7권2호
• /
• pp.108-114
• /
• 2015

PURPOSE. The aim of this study was to evaluate effect of different surface treatment methods on the bond strength between aged composite-resin core and luting agent. MATERIALS AND METHODS. Seventy-five resin composites and also seventy-five zirconia ceramic discs were prepared. 60 composite samples were exposed to thermal aging (10,000 cycles, 5 to $55^{\circ}C$) and different surface treatment. All specimens were separated into 5 groups (n=15): 1) Intact specimens 2) Thermal aging-air polishing 3) Thermal aging- Er:YAG laser irradiation 4) Thermal aging- acid etching 5) Thermal-aging. All specimens were bonded to the zirconia discs with resin cement and fixed to universal testing machine and bond strength testing loaded to failure with a crosshead speed of 0.5 mm/min. The fractured surface was classified as adhesive failure, cohesive failure and adhesive-cohesive failure. The bond strength data was statistically compared by the Kruskal-Wallis method complemented by the Bonferroni correction Mann-Whitney U test. The probability level for statistical significance was set at ${\alpha}$=.05. RESULTS. Thermal aging and different surface treatment methods have significant effect on the bond strength between composite-resin cores and luting-agent (P<.05). The mean baseline bond strength values ranged between $7.07{\pm}2.11$ and $26.05{\pm}6.53$ N. The highest bond strength of $26.05{\pm}6.53$ N was obtained with Group 3. Group 5 showed the lowest value of bond strength. CONCLUSION. Appropriate surface treatment method should be applied to aged composite resin cores or aged-composites restorations should be replaced for the optimal bond strength and the clinical success.

• 패션비즈니스
• /
• 제18권5호
• /
• pp.159-170
• /
• 2014

Recent concerns about the PFOA(perfluorooctanoic acid), have been increasing, which is generally applied in the water-repellent finishing process of textile products. It has been proven through animal testing to be harmful to humans, as possible carcinogens and neuro-toxic material. Thus U. S. Environmental Agency has gone as far as requiring the material to be eliminated in its entirety by 2015. As a viable alternative to this water-repellent finishing agent, the development of C6 product is gaining its popularity. The effects of PFOA finishing on the silk fabrics were examined, and we reviewed parameters of the needed process for optimizing appearance and functionality of silk fabrics treated with eco-friendly water-repellent finishing agent. Cross-linking agent affected the most on black color of reactive ink, among the physical properties. The contact angle reading was the highest in $8g/{\ell}$ of concentration for all fabrics. All the fabric specimens, subjected to the DTP and water repellent finishing, exhibited higher stiffness, where rayon specimen showed the highest, compared to the untreated specimens. The results may provide basic information leading to the development of value-added silk fabrics with water-repellency without excessive deterioration of the delicate appearance and inherent soft touch.

• KIEAE Journal
• /
• 제16권4호
• /
• pp.71-77
• /
• 2016

Purpose : The energy saving in a residential building (apartment) sector is known as one of the effective solution of energy reduction. In South Korea, the government has recently reinforced regulations associated with the energy performance of buildings. However, there is a lack of research on the methods for the energy performance diagnosis that is used to analyze the wall thermal performance of the existing apartments. Because a reliable diagnosis is necessary to save the building energy, this study analyzed wall thermal performance of an existing apartment in Seoul. Method : This paper applied two methods for analysis of the thermal insulation performance; HFM(Heat Flow Meter) method and ASTR(Air-Surface Temperature Ratio) method. The HFM method is suggested by ISO9869-1 code to measure the thermal performance. The ASTR method is proposed by this study for the simplified In-situ measurement and it uses three temperature data (interior wall surface, interior and exterior air) and the overall heat transfer coefficient. This study conducted the experiment of an existing apartment in Seoul using these methods and analyzed the results. Furthermore, the energy simulation tool of the building was used to suggest retrofit of the building based on the results of measurements. Result : The error rate of HFM method and ASTR method was analyzed in about 17 to 20%. As the results of comparison between the initial design values of the wall and the measured values, the 26% degradation of insulation thermal performance was measured. Lastly, the energy simulation tool of the building shows 10.8% energy savings in accordance with the construction of suggested retrofit.