• Journal of Korean Society of Forest Science
• /
• v.95 no.3
• /
• pp.316-322
• /
• 2006

This study was conducted to examine the changes of seed characteristics and germination properties and to determine the most suitable collection time in Ulmus davidiana var. japonica. Seeds were collected six times with the interval of seven days after April 21, 2005 at Jeong-seon. There were differences in seed characteristics and germination properties among seed collection times. The sizes of seed and fruit increased with the collection time, but seed moisture contents decreased with the collection time after increasing until May 5. The 1,000 seeds weight decreased with the collection time after increasing until May 12. Collection time showed high positive correlations (r=0.790, p<0.01) with seed size and negative correlations (r=-0.919, p<0.01) with moisture contents. Percent germination (PG) presented the highest value in seeds collected at May 5, and decreased with the collection time. Mean germination time(MGT), germination speed(GS), and germination performance index(GPI) also showed the highest values in seeds collected at May 5. PG, MGT, and GS had correlations with other seed characteristics except the 1,000 seed weight. The relative growth rate of height and root collar diameter of seedlings presented the highest values in seedling germinated from seed collected at May 5, and seedlings germinated from seeds collected at May 5 and 12 showed the highest values in chlorophyll contents. Consequently it will be possible to product a number of seedlings when the seeds of U. davidiana var. japonica are collected just before drying morphologically.

• Fisheries and Aquatic Sciences
• /
• v.17 no.3
• /
• pp.313-318
• /
• 2014

From 2008 to 2013, the mussel Mytilus galloprovincialis were collected from a major area of mussel production (Changseon area), which is a designated shellfish-cultivating area for export, located on the southern coast of Korea. The samples were analyzed for mercury (Hg) using a direct Hg analyzer and for other metals, such as cadmium (Cd), lead (Pb), arsenic (As), chromium, copper, nickel, and zinc, using inductively coupled plasma mass spectrometry. The concentrations and bioaccumulation of the heavy metals were determined, and a potential risk assessment was conducted to evaluate their hazards towards human consumption. The concentration and bioaccumulation ratio of Cd were the highest of the three hazardous metals (Cd, Pb, and Hg). The concentrations of hazardous metals in all samples were within the limits set by Korea and other countries. The estimated dietary intake (EDI) was compared to the provisional tolerable daily intake (PTDI) adopted by the Joint FAO/WHO Expert Committee on Food Additives and the U.S. Environmental Protection Agency. The EDIs of all heavy metals tested for mussel samples ranged from 0.01 to 4.99% of the PTDI; the highest value was measured for As. The hazard index (HI) can be used to assess the risk of heavy metal consumption associated with contaminated food. The HI for all samples was far less than 1.0, which indicates that the mussels produced in the Changseon area do not represent an appreciable hazard to humans and are fit for consumption.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.9
• /
• pp.1460-1468
• /
• 2007

In this study, an approx. 2.5-kb gene fragment including the catalase gene from Rhodospirillum rubrum S1 was cloned and characterized. The determination of the complete nucleotide sequence revealed that the cloned DNA fragment was organized into three open reading frames, designated as ORF1, catalase, and ORF3 in that order. The catalase gene consisted of 1,455 nucleotides and 484 amino acids, including the initiation and stop codons, and was located 326 bp upstream in the opposite direction of ORF1. The catalase was overproduced in Escherichia coli UM255, a catalase-deficient mutant, and then purified for the biochemical characterization of the enzyme. The purified catalase had an estimated molecular mass of 189 kDa, consisting of four identical subunits of 61 kDa. The enzyme exhibited activity over a broad pH range from pH 5.0 to pH 11.0 and temperature range from $20^{\circ}C$ to $60^{\circ}C$C. The catalase activity was inhibited by 3-amino-1,2,4-triazole, cyanide, azide, and hydroxylamine. The enzyme's $K_m$ value and $V_{max}$ of the catalase for $H_2O_2$ were 21.8 mM and 39,960 U/mg, respectively. Spectrophotometric analysis revealed that the ratio of $A_{406}$ to $A_{280}$ for the catalase was 0.97, indicating the presence of a ferric component. The absorption spectrum of catalase-4 exhibited a Soret band at 406 nm, which is typical of a heme-containing catalase. Treatment of the enzyme with dithionite did not alter the spectral shape and revealed no peroxidase activity. The combined results of the gene sequence and biochemical characterization proved that the catalase cloned from strain S1 in this study was a typical monofunctional catalase, which differed from the other types of catalases found in strain S1.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.2
• /
• pp.84-95
• /
• 2014

Recently, as a variety of techniques of CMF (Compressed media filter) that has advantages of high porosity and compressibility have been developed in the U.S. and Japan. Therefore, the interest of intensive wastewater treatment using CMF has grown. This study examined the feasibility of CMF with varying sewage water quality to determine the optimum operating conditions. A preliminary tracer test that investigated the filtering process under various compression and flow rate conditions was performed. In a high compression condition, different porosities were applied to each depth of the column. Therefore, a distinct difference between a theoretical value and results of tracer test was observed. For the TSS (Total suspended solid) removal and particle size distribution of CMF for pre-treatment water under the various compression conditions, the compression ratio of 30 percent as the optimal condition showed greater than 70% removal efficiency. In addition, the compression ratio of >15% was required to remove small-sized particles. Also, an additional process such as coagulation is necessary to increase the removal efficiency for < $10{\mu}m$ particles, since these small particles significantly influence the effluent concentration. Modeling results showed that as the compression rate was increased, TSS removal efficiency in accordance with each particle size in the initial filtration was noticeably observed. The modeling results according to the depth of column targeting $10{\mu}m$ particles having the largest percentage in particle size distribution showed that 150-300 mm in filter media layer was the most active with respect to the filtering.

• Journal of Preventive Medicine and Public Health
• /
• v.14 no.1
• /
• pp.97-110
• /
• 1981

This study was conducted in order to investigate the status of harmful working environ ment on twelve rubber and ten chemical products manufacturing industries in Busan area over a period of five months from lune 1 to October 31, 1980. The summarized results were as follows: 1. The highest and lowest mean values of harmful environmental elements in workroom of rubber products manufacturing industries were noted in twisting (98.7dB) and coating department (77.3dB) to noise, molding ($6.43mg/m^3$) and forming ($1.33mg/m^3$) to dust, bonding (toluene 463.7ppm, xylene 457.8ppm and benzene 111.8ppm, respectively) and splicing (toluene 90.0ppm, xylene 83.3ppm and benzene 6.7ppm, respectively) to organic solvents, respectively. Also in chemical products manufacturing, they were noted in grinding (95.1dB) and shining department (76.8dB) to noise, packing ($4.30mg/m^3$) and staining ($3.20mg/m^3$) to dust, shining (393.3ppm and 375.0ppm, respectively) and varnishing(125.5ppm and 121.7ppm, respectively) to toluene and xylene, and scattering (51.8ppm) and mixing (23.9ppm) to benzene, respectively. 2. The mean values of harmful elements in workroom of rubber products manufacturing were 86.3dB to noise, $4.16mg/m^3$ to dust, 258.2ppm to toluene, 230.3ppm to xylene, and 5 4.0ppm to benzene, respectively. Also in chemical products manufacturing, they were 85.2dB to noise, $3.69mg/m^3$ to dust, 227.9ppm to toluene, 213.2ppm to xylene, and 36.3ppm to benzene, respectively. 3. Number of workers exposed to harmful working environment, over TLV, of a total 10,195 workers in rubber products manufacturing were 1,002(9.8%) to noise, 212 (2.1%) to dust, 1,581(15.5%) to toluene, 1,509(14,8%) to xylene, and 1,524(15.0%) to benzene, respectively. Number of workers exposed to harmful working environment, over TLV, of a 1,913 workers in chemical products manufacturing were 112(5.9%) to noise, 132(6.9%) to each organic solvent, respectively. 4. The values of noise and dust of rubber and chemical products manufacturing in 1980 were lower then those in 1977, but the value of organic solvent in 1980 was similar with that in 1977.

• Journal of Korean Society of Transportation
• /
• v.20 no.6
• /
• pp.59-68
• /
• 2002

AADT(Annual Average Daily Traffic) can be obtained by using short-term counted traffic data rather than using traffic data collected for 365 days. The process is a very important in estimating AADT using short-term traffic count data. Therefore, There have been many studies about estimating AADT. In this Paper, we tried to improve the process of the AADT estimation based on the former AADT estimation researches. Firstly, we found the factor showing differences among groups. To do so, we examined hourly variables(divided to total hours, weekday hours. Saturday hours, Sunday hours, weekday and Sunday hours, and weekday and Saturday hours) every time changing the number of groups. After all, we selected the hourly variables of Sunday and weekday as the factor showing differences among groups. Secondly, we classified 200 locations into 10 groups through cluster analysis using only monthly variables. The nile of deciding the number of groups is maximizing deviation among hourly variables of each group. Thirdly, we classified 200 locations which had been used in the second step into the 10 groups by applying statistical techniques such as Discriminant analysis and Neural network. This step is for testing the rate of distinguish between the right group including each location and a wrong one. In conclusion, the result of this study's method was closer to real AADT value than that of the former method. and this study significantly contributes to improve the method of AADT estimation.

• Parasites, Hosts and Diseases
• /
• v.26 no.4
• /
• pp.275-284
• /
• 1988

This study was performed to observe the present status of intestinal parasitic infections in a remote island, Yondo, located in southern part of Jeonranam-do (Province) , Korea. In February and May, 1988, total 1,011 individual stool samples were collected and examined for intestinal helminths and protozoa using formalin-ether centrifugal sedimentation technique. The results are summarized as follows: 1. Of 1,011 inhabitants examined, 398(39.4%) were positive for intestinal parasites. Helminth positives were 372(36.8%) , and protozoan cyst positives were 56(5.5%) . 2. Ten species of parasites were found. Trichuris trichiura revealed the highest infection rate of 27.5%, Ascaris lumbricoides 17.4%, Taenia sp. 5.8%, Entamoeba coli 3.3%, Ciardia Zamblia 1.5%, Endelimax nasa 0.8%, Hymenolepis nana 0.4%, Hookworm 0.2%, Trichostrongylus orientalis 0,2%, and Entamoeba histolytica 0.2%, respectively. 3. The female group showed higher positive rate(44.0%) than males (34.7%). Also, higher positive rates were observed among adults as compared with the group younger than 10 years old. 4. Average value of E.P.G. was 1,876(range 200∼17,800) in A. lumbricoides positives, and 327 (range 200∼1,600) in T. trichiura positive cases. 5. In helminth egg Positive cases, single in(traction was 63.4%, double infection 34.7%, and triple infection 1.9%, respectively. Among protozoan cyst positives, single infection was 94.6%, and double infection was 5.4%. The present study revealed that the prevalence of intestinal parasites among inhabitants in Yondo island is still so high that special control measures should be performed.

• Korean Journal of Environmental Agriculture
• /
• v.31 no.2
• /
• pp.175-184
• /
• 2012

BACKGROUND: The aim of this study was to isolate and identify algicidal bacterium that tends to kill the toxic dinoflagellate Alexandrium catenella, and to determine the algicidal activity. METHODS AND RESULTS: Among of four algicidal bacteria isolated in this study, NH-12 isolate was the strongest algicidal activity against A. catenella. NH-12 isolate was identified on the basis of biochemical characteristics and analysis of 16S rRNA gene sequences. The isolate showed 97.67% homology with Pseudoalteromonas prydzensis ACAM $620^T$ (U85855), and was designated Pseudoalteromonas sp. NH-12. The optimal culture conditions of this isolate were $25^{\circ}C$, initial pH 8.0, and 3.0% (w/v) NaCl concentration. The algicidal activity of NH-12 was significantly increased to maximum value in the late of logarithmic phase of bacterial culture. As a result of 'cell culture insert' experiment, NH-12 is assumed to produce secondary metabolites, as an indirect attacker. When 10% culture filtrate of NH-12 was applied to A. catenella, over 99% of algal cells were destroyed within 24 h. In addition, the killing effects were increased in dose and time dependent manners. CONCLUSION(S): Taken together, our results suggest that Pseudoalteromonas sp. NH-12 could be a candidate for controlling of toxic algal blooms.

• Korean Journal of Food Science and Technology
• /
• v.39 no.6
• /
• pp.614-618
• /
• 2007

The effect of irradiation on the quality characteristics of lyophilized kimchi powder was investigated in order to develop a commercial kimchi seasoning. Fresh and fermented kimchi powders were irradiated at 0, 1.5, 5, 10 and 30 kGy using a Linear Accelerator. By increasing the irradiation dose level, $a^*$ (redness) and $b^*$ (yellowness) values of the kimchi powders were decreased, while $L^*$ (lightness) value remained relatively unchanged as compared to the control. As the main volatile compounds, butanal, 2-butanone and acetic acid were produced in both of the kimchi powders at 30 kGy and dipropyl disulfide was detected only in the fermented kimchi. The viable counts of aerobic bacteria, yeasts, molds, and lactic acid bacteria in the kimchi powder were significantly reduced by all irradiation doses. However, aerobic and lactic acid bacteria were still observed in both of the kimchi powders at 30 kGy. No significant off-odors or off-tastes were produced in either of the kimchi powders by irradiation, while pungency decreased after irradiation. These results suggest that irradiated kimchi powder could be used as a kimchi seasoning.

• Analytical Science and Technology
• /
• v.27 no.5
• /
• pp.243-247
• /
• 2014

Formaldehyde is defined as carcinogen causing leukaemia, lymphoma or nasopharyngeal carcinoma at high level of exposure. Furniture-manufacturing workers can be exposed to formaldehyde, which implies serious impact on health of the workers. The authors carried out ambient monitoring of formaldehyde in the field, and identified the source of formaldehyde generated during the working process by testing the condition in the laboratory settings. After sampling formaldehyde in the air with 2,4-DNPH (2,4-dinitrophenylhydrazine) coated silica gel, we extracted formaldehyde derivative with acetonitrile and analyzed the extract using HPLC with UV detector at 360 nm. Formaldehyde was separated by ACQUITY UPLC BEH $C_{18}$ column at a flow rate of 0.5 mL/min using 45% acetonitrile as mobile phase. The workers were exposed to higher level of formaldehyde than normal air. Formaldehyde up to 0.31 ppm was detected in the process of veneer attachment, which exceeded 0.3 ppm, the ceiling value of ACGIH standard. The laboratory test of measuring formaldehyde generated from the glue and veneer used in the attachment process resulted in more formaldehyde generation as the temperature increased, and more from the veneer. Heating the veneer to $100-150^{\circ}C$ following the real condition of the manufacturing site generated 1.14-2.70 ppm of formaldehyde from the sample, which was 2-5 times higher level than Korean limit of exposure (0.5 ppm). As the workers handling and processing the veneer which was produced by wet process had high possibility to be exposed to formaldehyde, urgent improvement and management of working environment of furniture manufacturer is demanded.