• Korean Journal of Environmental Agriculture
• /
• v.3 no.2
• /
• pp.43-49
• /
• 1984

The acute toxicity of an insecticide cartap to several species of freshwater animals was evaluated in the laboratory with special reference to the species specificity, effects of water temperatures and pH values. The aquatic animals tested were the Carassius auratus L., Aphyocypris chinensis $G{\"{U}}NTHER$, Misgurus anguillicaudatus CANTOR, Moina macrocopa STRAUS. The susceptibility of aquatic animals to cartap was different with the species of animals. At the water temperature of $25^{\circ}C$ and pH 7, TLm values of the insecticide to the C. auratus L., A. chinensis G. and M. anguillicaudatus were 0.88, 0.26 and 0.13 ppm in 48 hours, respectively, and to Moina macrocopa S., 306 ppm in 3 hrs. In the case of the three species of fish, TLm 48 values were significantly decreased with rise in temperature. In the case of water flea, where TLm value was 107 ppm at $20^{\circ}C$, there was no consistent response to temperature change, with the highest figure at $25^{\circ}C$ than at either 20 or $30^{\circ}C$. and the susceptibility of C.auratus L. and A. chinensis G. greatly decreased with the increase of pH in water. The toxicity to M. anguillicaudatus and M. macrocopa was significantly higher at pH 9 than at pH 6 or 7. In conclusion, the toxicological reactions of the freshwater animals to cartap were variably influenced by the water temperatures and pH values of water and species of animals.

• Applied Biological Chemistry
• /
• v.49 no.4
• /
• pp.328-333
• /
• 2006

Many plant extracts are known to have antioxidative effects. However, their activities can be reduced or disappeared during mass production process. The purpose of this study is to compare antioxidative effects of edible plant extracts distributed in Korea. forty three kinds of edible plant extracts commercially available in Korea were selected and investigated for their total phenolics contents and antioxidative potentials(DPPH radical and superoxide anion radical scavenging activities). In contents of total phenolics, the commercial plant extracts from Artemisia annua(whole plant), Ilex paraguariensis(leaf, Silybum marianum(fruit and leaf, Ulmus pumila(bark), Coliolus versicolor(fruit), and Curcuma longa(root and stem) contained over 70 mg/g of powder, DPPH radical scavenging activities($SC_{50}$, 50% scavenging concentration) of A. annua, I. paraguariensis, Pinus densiflora(leaf),S. marianum, U. pumila, and C. longa were $53.96{\pm}0.81\;ppm,\;24.61{\pm}2.12\;ppm,\;35.96{\pm}1.11\;ppm,\;57.46{\pm}2.13\;ppm,\;55.25{\pm}1.65\;ppm\;and\;12.99{\pm}1.67ppm$, respectively, while that of positive control(vitamin C) was $3.86{\pm}0.81\;ppm$. $SC_{50}$ values against superoxide anion radical of A. annua, Cinnamomum zeylanicum(bark), I. paraguariensis, Rubus coreanus(fruit and leaf), Morus alba(leaf), P. densiflora, S. marianum, U. pumila, C. versicolor, C. longa, Perilla frutescens var. acuta(leaf), and H. sabdariffa(leaf and newer) were $53.21{\pm}1.83ppm,\;50.12{\pm}2.12ppm,\;5.59{\pm}0.84ppm,\;41.60{\pm}8.93ppm,\;20.19{\pm}0.97ppm,\;15.19{\pm}1.66ppm,\;21.20{\pm}1.88ppm,\;15.71{\pm}0.91ppm,\;55.48{\pm}2.42ppm,\;52.12{\pm}2.44ppm,\;23.80{\pm}1.98ppm\;and\;11.14{\pm}0.51ppm$, respectively($SC_{50}$ value of vitamin C: $9.61{\pm}0.93ppm$). In particular, both 1 paraguariensis and P. densiflora had high content of phenolics as well as high scavenging activities of DPPH radical and superoxide anion radical. Consequently, above two commercial extracts may be useful as a source of antioxidative nutraceutics.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.325-329
• /
• 2015

Purpose: The aim of this study was to compare the film thicknesses of several resin cements as a function of time after mixing and to examine the effect of working time on the film thicknesses. Materials and methods: The film thickness (${\mu}m$) of 4 resin cements (n=10), 1 composite resin (Panavia F 2.0), 3 self-adhesive resin (Clearfil SA luting, Zirconite, RelyX U200) cements was measured at 20-second intervals after mixing of the cements up to 200 seconds under a load of 50 N. Linear regression was fitted to verify the effect of working time on the film thickness of each cement. Data were compared to the working time recommended by manufacturers using Wilcoxon test ($\alpha$=.05). Results: All of the materials showed a positive linear correlation between the film thickness and working time. There was no statistically significant difference between the working time based on our results and the values recommended by the manufacturers even though there was a discrepancy between those two values. Conclusion: The film thickness of resin cements could increase with the increase of working time. Working time to meet the ISO standard of $50-{\mu}m$ maximum film thickness could be different from the manufacturer's recommended value.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.2
• /
• pp.121-126
• /
• 1999

In order to degrade chitin by enzymatic hydrolysis, it is required from screening highly active deacetylase. To this end, we examined three fungal strains and it turned out that Mucor rouxii produced highly active deacetylase, this enzyme exhibited the highest enzymatic activity against colloidal chitin. The conditions for growing Mucor rouxii are as follows; the effective carbon source, nitrogen source, adequate initial pH, temperature and incubation time were $2\%$ glucose, $1.33\%$ yeast extract, $0.66\%$ pepton, 4.5, $25{\pm}2^{\circ}C$ and 48hr, respectively. The optimum pH and temperature for purified enzyme activity were 5.5 and $40^{\circ}C$, respectively. The purified enzyme was stable at pH ranging from 4.5 to 5.5. However, the enzyme activity was decreased to less than $50\%$ at pH blow 45 and above 7.5. At temperatures above $50^{\circ}C$, the enzyme activity was decreased remarkably. The enzyme was inhibited by LiC1, $HgCl_2$, and $BaCl_2$, but stimulated by $CaCl_2$ and $ZnC1_2$, The activity of purified enzyme was increased by L-cysteine and 2-mercaptoethanol, while decreased by O-phenanthroline, p-CMB, EDTA, and iodoacetate. The $K_m$ and the $V_{max}$ value of purified enzyme were $1.2\%$ and 59.5 U/mg, respectively. The deacetylation activity of purified enzyme was not detected at optimal reaction condition when chitin particle suspension was used.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.2
• /
• pp.233-243
• /
• 2006

The aim of this study was to investigate the relationship between the C-factor and shrinkage strain values of composite resin and examine the strain values in different incremental filling techniques. Experiment consisted two aims. First, we compared with strain value in two different C-factors(3.7 and 1.0). Second, we examined the strain values in three different filling techniques. The results of the present study can be summarized as follows : 1. High C-factor groups showed higher contraction stress values than low C-factor groups at 900 sec after polymerization. 2. Hybrid resin showed higher contraction stress values than flowable resin in high C-factor cavities. But contraction stress was not revealed significant difference between hybrid resin and flowable resin in low C-factor cavities (P>0.05). 3. Bulk felling with hybrid resin(Group 1) showed high contraction stress and lining with flowable resin followed hybrid resin (Group 5) showed lower contraction stress. 4. Contraction stress were increased during 900 sec after polymerization in high C-factor groups but decreased gradually after 900 sec. 5. Low C-factor groups showed tight marginal seal between resin and cavity wall but high C-factor groups showed gaps formed between resin and cavity wall in part. On the basis above results, layering techniques in high C-factor cavity showed advantages in reducing contraction stress and gap formation between cavity wall and resin restoration.

• Clinical and Experimental Reproductive Medicine
• /
• v.27 no.3
• /
• pp.235-243
• /
• 2000

Objective: Our present studies were conducted to examine more effective isolating method of preantral follicles from mouse ovaries. Methods: ICR mice (3-6 weeks old) were sacrificed through cervical dislocation and their ovaries were removed and put into watch glasses containing Hams F-10 supplemented with 10% fetal bovine serum (FBS). Preantral follicles were isolated by three different methods; 1) enzymatical method and 2) mincing method, and 3) scraping method. Enzymatical method was carried out as following. Ovaries were bisected with a pair of fine 30G needles. Bisected ovaries were incubated at $37^{\circ}C$ and 5% $CO_2$ incubator in 2-well dish containing Hams F-10 supplemented with collagenase 600 lU/ml and DNAse 20 lU/ml. After 20 min., follicles were isolated by repeated pipetting. Isolated preantral follicles were collected, and the remnant of tissues was placed in incubator and previous procedure was repeated. Mincing method was carried out with a pair of fine 30G needles attached to 1 ml syringes and minced ovary. Scraping method was carried out with a pair of fine 30G needles and scratched to surface of ovary. The differences between isolating methods were analyzed using Student's t-test and Chi-square. Results were considered statistically significant when ${\rho}$ value was less than 0.05. Results: In handling time, mincing or scraping method ($28{\pm}3.42$ min or $16{\pm}1.58$ min) were significantly (p<0.00001) shorter than enzymatical method ($72{\pm}1.69$ min), and scraping method was significantly (p<0.01) shorter than mincing method. Total number of isolated follicles was significantly (p<0.0001) higher in enzymatical method ($49.8{\pm}3.91$) than in mincing or scraping method ($25.3{\pm}2.33$ or $20.5{\pm}1.75$). Isolated follicles in ${\leq}$90${\mu}m$ were significantly (p<0.005) higher in enzymatical method ($15{\pm}1.71$) than in mincing or scraping method ($7.8{\pm}0.98$ or $8.1{\pm}1.31$). In 91~130 ${\mu}m$, isolated follicles were significantly (p<0.0005) higher in enzymatical method ($33{\pm}3.27$) than in mincing or scraping method ($16.3{\pm}1.82$ or $10.7{\pm}1.38$). In ${\geq}$ 131 ${\mu}m$, isolated follicles were not significantly differences between all groups. In equal sizes, the rate of isolated follicles in ${\leq}$ 90 ${\mu}m$ was highest in scraping method (39.6% vs. enzymatical method: 30.1%, p<0.05; mincing method: 30.9%, p=0.11719, NS). Rate of follicles in $91{\sim}130$ ${\mu}m$ was significantly (p<0.05) lower in scraping method (52.7%) than in enzymatical or mincing method (66.3% or 64.5%). Rate of follicles in ${\geq}$131 ${\mu}m$ was highest in scraping method (8.3% vs. enzymatical or scraping method: 3.6%, p<0.05 or 4.6%, p=0.19053, NS). Conclusions: This study suggests that scraping method is simple and useful for isolation of preantral follicles, because this method reduced handling time and recovered enough follicles. The recovered rate of isolated follicles in diameter of 91 ~ 130 ${\mu}m$ was highest in all methods.

• The Journal of the Petrological Society of Korea
• /
• v.7 no.1
• /
• pp.15-26
• /
• 1998

The Dabie-Sulu ultra-high pressure metamorphic (UHPM) zone is commonly suggested to be a collisional belt between the Sino-Korea craton (North China craton) and Yangtze craton (Zhai and Cong, 1996). Two important questions in formulating the tectonic evolution of the northeast Asia are : (1) the boundary between the UHPM zone and the Sino-Korea craton in the Shandong peninsula and (2) the extension of this Chinese UHPM zone into the Korean peninsula. There have been different opinions on the boundary between UHPM zone and the Sino-Korea craton in the Shandong peninsula. For example, the boundary has been suggested to be the Tan-Lu fault (Bai et al., 1993; Wang and Cong, 1996), or Wulian-Rongcheng fault (Cao et al., 1990). Our recent study finds out new evidences, indicating that the possible boundary is the Kunyushan granitoid complex zone, which occurs along the Wulian-Muping fault. Our new evidences are : (1) the basic rocks west to the Kunyushan granitoid zone are high-pressure granulites rather than eclogites (Zhai, 1996) with their Sm-Nd isotopic ages of 1750 Ma and 2788 Ma, representing their retrograde metamorphic and petrogenetic ages, respectively (Li et al., 1997b); (2) the orthogneisses west to the Kunyushan granitoid zone yield 2600-2900 Ma zircon ages and 1600-2020 Ma Rb-Sr and chemical U-Th-total Pb ages, with no younger data (Enami et al., 1993; Ishizaka et al., 1994), having a typical characteristic for the early Precambrian rocks in the Sino-Korea craton; (3) the orthogneisses east to the Kunyushan granitoid zone have 110-320 Ma isotopic ages with a peak value of 180-230 Ma, showing a typical characteristic of metamorphic rocks in the UHPM zone; (4) the Kunyushan granitoid zone consists of numerous granitic bodies, stocks and veins, which have 1900-2000 Ma, 610-710 Ma and 124-180 Ma istotopic ages indicating a long and complicated evolution history of this granitoid zone. There are many lenses and enclosures of metamorphic rocks from the Sino-Korea craton and Sulu UHPM belt in the Kunyushan granitoid zone. Zhai et al. (1998) have defined the Kunyushan granitoid zone as the Jiaodong Boundary complex zone. Some geologists suggested that the UHPM zone extend eastward to the Korea peninsula (Yin and Nie, 1993; Wang and Cong, 1996) and possibly to the Imjingang belt (Chang, 1994; Ree et al., 1996). Unfortunately, there has not been a conclusive evidence indicating that UHPM rocks occur in the Korea peninsula. In this regard, it becomes more important to compare metamorphic rocks in the Shandong peninsula with those in northern and southern Korea peninsula.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.1
• /
• pp.1-15
• /
• 2015

The purpose of this study was to analyze the commemoration characteristics of Vietnam War Memorials(VWM) in the United States(VWMUS). Through site survey and internet research, the researcher selected 87 VWMUS except monuments simply with markers, and analyzed 5 analysis items: design concepts, spatial characteristics, landscape details, sculptures, and interpretive texts and symbols. The results are as follows: 1. The analysis revealed that the main concepts of VWMUS were to cherish victims of the Vietnam War(85 sites (97.7%)), show veteran's dedication for country(85 sites(97.7%)), and publicize the contribution of groups by troop, regional, and membership(84 sites(96.6%)). 2. Most VWMUS were located in memorial parks and plazas. 59 memorials(67.8%) were designed to pursue the completion of each memorial assuming the form of symmetry and circles. On the other hand, 12 memorials(13.8%) were typed memorial walls and 11 memorials(12.6%) were formed by spatial sequence including various landscape details and grading. 3. Stone walls were mainly used to cherish victims of the War at 65 memorials(74.7%), and also, Flags like the Stars and Stripes, POW MIA flags, and state flags were hoisted to symbolize memorial's identity at all memorials. Additionally, Benches, monuments, markers, posts and columns, ponds and channels, Helicopters were partially introduced some memorials. 4. Sculptures were used 21 memorials(24.1%) which were smaller in numbers than other War Memorial in the U.S.A., for black stonewall were used for the main element of VWMUS. Except for a few sculptures that aimed to represent the Vietnam War symbolically and narratively, 16 memorials(18.4%) were formed to realistically express the image of wounded soldiers and their hardship in the Vietnam War. 5. KIA, MIA, Veteran's name were written and their images depicted on walls, Also, the symbolic phrase, 'ALL GAVE SOME, SOME GAVE ALL' and 'DUTY, HONOR, COUNTRY' were written on the memorials walls, and the POW MIA symbols were printed on the flags and engraved on walls. 6. In the United States of America, Democratic patriotism was considered a main ideological value in VWMUS by engraving KIA MIA's names on the walls, hoisting flags Stars and Stripes and POW MIA, and writing symbolic phrases 'ALL GAVE SOME, SOME GAVE ALL' and 'DUTY, HONOR, COUNTRY'. On the contrary, in Vietnam, nationalism, patriotism, and socialism were emphasized as main ideologies through raising war victory and resistance to foreign power as well as writing the symbolic phrase 'TO-QUOC-GUI-CONG' meaning 'our country remember your achievement' on memorial towers. Further study will be required to comparatively analyze VWM in order to understand national characteristics in Korea, Australia, U.S.A, and Vietnam.

• Journal of Chest Surgery
• /
• v.38 no.2 s.247
• /
• pp.101-109
• /
• 2005

Background: In sudden cardiac arrest, the effective maintenance of coronary artery blood flow is of paramount importance for myocardial preservation as well as cardiac recovery and patient survival. The purpose of this study was to directly compare the effects of pulsatile and non-pulsatile circulation to coronary artery flow and myocardial preservation in cardiac arrest condition. Material and Method: A cardiopulmonary bypass circuit was constructed in a ventricular fibrillation model using fourteen Yorkshire swine weighing $25\~35$ kg each. The animals were randomly assigned to group I (n=7, non-pulsatile centrifugal pump) or group II (n=7, pulsatile T-PLS pump). Extra-corporeal circulation was maintained for two hours at a pump flow of 2 L/min. The left anterior descending coronary artery flow was measured with an ultrasonic coronary artery flow measurement system at baseline (before bypass) and at every 20 minutes after bypass. Serologic parameters were collected simultaneously at baseline, 1 hour, and 2 hours after bypass in the coronary sinus venous blood. The Mann-Whitney U test of STATISTICA 6.0 was used to determine intergroup significances using a p value of < 0.05. Result: The resistance index of the coronary artery was lower in group II and the difference was significant at 40 min, 80 min, 100 min and 120 min (p < 0.05). The mean velocity of the coronary artery was higher in group II throughout the study, and the difference was significant from 20 min after starting the pump (p < 0.05). The coronary artery blood flow was higher in group II throughout the study, and the difference was significant from 40 min to 120 min (p < 0.05) except at 80 min. Serologic parameters showed no differences between the groups at 1 hour and 2 hours after bypass in the coronary sinus blood. Conclusion: In cardiac arrest condition, pulsatile extracorporeal circulation provides more blood flow, higher flow velocity and less resistance to coronary artery than non-pulsatile circulation.

• Korean Journal of Dental Materials
• /
• v.45 no.4
• /
• pp.233-242
• /
• 2018

The purpose of this study is to evaluate the effect of resin cement color on the color of commercially available zirconia crown. The zirconia and resin cements used for the experiment were $NuSmile^{(R)}$ ZR Zirconia LT Shade (LT), $RelyX^{TM}$ U200 TR, A2, and A3O (TR, A2, A3O). The disks of zirconia and resin cements with diameters of 5 mm and thicknesses of 1 mm were prepared. Five disks were made for each specimen. The CIE $L^*a^*b^*$ values of zirconia, resin cements and the combinations thereof were measured on black and white backgrounds, respectively, using a spectrophotometer. The color effect of resin cement on the color of the zirconia crown was evaluated by calculating translucency parameter (TP), contrast ratio (CR), and color differences (${\Delta}E{^*}_{ab}$) based on the measured CIE $L^*a^*b^*$ values. The statistical significances were verified by one-way ANOVA and the Tukey-multiple comparisons tests. As a result, the TP and CR values were decreased (p<0.05) and increased, respectively, in the combination of zirconia and resin cement disks compared to zirconia disk per se. When using the black background, the ${\Delta}E{^*}_{ab}$ values between zirconia and the combination of the zirconia and three resin cement disks were imperceptible level. The A3O showed the lowest ${\Delta}E{^*}_{ab}$ value among three resin cements. When using the white background, the ${\Delta}E{^*}_{ab}$ values between zirconia and the combination of zirconia and TR resin cement (LT/TR) disks showed acceptable level. However, the ${\Delta}E{^*}_{ab}$ values between zirconia and the combination of zirconia and A2 resin cement (LT/A2) disks showed unacceptable level. Meanwhile, the ${\Delta}E{^*}_{ab}$ values between zirconia and the combination of zirconia and A3O resin cement (LT/A3O) disks showed perceptible but acceptable level. Within the limits of this study, the colors of resin cements did not cause unacceptable color changes of zirconia except the combination of LT/A2 on the white background. The resin cement that gave the least color changes to zirconia was A3O. This means that the resin cement A3O is recommended to use for minimizing color changes when cementing commercially available zirconia crown to tooth.