• Nuclear Engineering and Technology
• /
• 제51권4호
• /
• pp.1032-1036
• /
• 2019

When the equipment which is related to safety or important to power production is installed in nuclear power plant units (NPPs), verification of equipment Electromagnetic Susceptibility (EMS) must be performed. The low-frequency radiated magnetic field susceptibility (RS101) test is one of the EMS tests specified in U.S NRC (Nuclear Regulatory Commission) Regulatory Guide (RG) 1.180 revision 1. The RS101 test verifies the ability of equipment installed in close proximity to sources of large radiated magnetic fields to withstand them. However, RG 1.180 revision 1 allows for an exemption of the low-frequency radiated magnetic susceptibility (RS101) test if the safety-related equipment will not be installed in areas with strong sources of magnetic fields. There is no specific exemption criterion in RG 1.180 revision 1. EPRI TR-102323 revision 4 specifically provides a guide that the low-frequency radiated magnetic field susceptibility (RS101) test can be conservatively exempted for equipment installed at least 1 m away from the sources of large magnetic fields (>300 A/m). But there is no exemption criterion for equipment installed within 1 m of the sources of smaller magnetic fields (<300 A/m). Since some types of equipment radiating magnetic flux are often installed near safety related equipment in an electrical equipment room (EER) and main control room (MCR), the RS101 test exemption criterion needs to be reasonably defined for the cases of installation within 1 m. There is also insufficient data regarding the strength of magnetic fields that can be used in NPPs. In order to ensure confidence in the RS101 test exemption criterion, we measured the strength of low-frequency radiated magnetic fields by distance. This study is expected to provide an insight into the RS101 test exemption criterion that meets the RG 1.180 revision 1. It also provides a margin analysis that can be used to mitigate the influence of low-frequency radiated magnetic field sources in NPPs.

• Geomechanics and Engineering
• /
• 제30권4호
• /
• pp.345-352
• /
• 2022

When rock burst occurs, the damaged coal, rock and other fragments can be ejected to the roadway at a speed of up to 10 m/s. It is extremely harmful to personnel and mining equipment, and seriously affects the mining activities. In order to study the energy evolution characteristics, especially kinetic energy, in the process of rock mass failure, this paper first analyzes the energy changes of the rock in different stages under uniaxial compression. The formula of the kinetic energy of rock sample considering the energy from the indenter of the testing machine is obtained. Then, the uniaxial compression tests with different stiffness ratios of the indenter and rock sample are simulated by numerical simulation. The kinetic energy U_d, elastic strain energy U_e, friction energy U_f, total input energy U and surface energy U_θ of crack cracking are analyzed. The results show that: The stiffness ratio has influence on the peak strength, peak strain, U_d, U_e, U_θ, U_f and U of rock samples. The variation trends of strength, strain and energy with stiffness are different. And when the stiffness ratio increases to a certain value, if the stiffness of the indenter continues to increase, it will have no longer effect on the rock sample.

• 대한전자공학회논문지TC
• /
• 제41권6호
• /
• pp.93-99
• /
• 2004

무선랜에 대한 수요의 급격한 증가로 HyperLAN(5.1-533GHz, 5.725-5.825GHz)이 전세계 적으로 무선랜을 위하여 새롭게 할당되고 있다. 또한 대부분의 이동통신기기는 크기가 작으므로 안테나의 크기는 효과적인 설계를 위해 매우 중요하다. 본 논문에서는 5GHz 무선랜을 위해 소형 광대역 안테나를 설계하였다. U슬롯 안테나는 간단한 구조이지만 $10-40\%$의 광대역을 가지고 있으며, 또한 좋은 방사특성을 가지고 있다. 그러나, 일반적으로 U슬롯 안테나의 크기는 크므로 PDA나 노트북과 같은 무선통신기기에 적용하기에 어려움이 있다. 제안된 안테나는 사각패치에 U형 슬롯을 이용하여 광대역 특성을 얻었고, 두 개의 유전체 기판과 스티로폼을 이용함으로써 소형화하였다. U슬롯 안테나의 설계를 위해 유한차분시간영역(FDTD) 법이 적용되었고 MPI 병렬화기법을 이용하여 FDTD법의 분석속도를 향상하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.874-877
• /
• 2000

Pre-coated sheet materials are a cost-effective and environmentally attractive alternative to conventional sheet materials coated after forming. At present but the high scratch sensitivity of coating used for pre-coated metal sheet is a major limitation to use of these materials. Because of high scratch sensitivity, products made by pre-coated metal sheet are not formed by conventional design method. This study has been performed to investigate scratch characteristic of non-vinyl pre-coated metal (PCM) sheet. Using the simple U-bending test equipment, three non-vinyls PCM's were tested. This paper provides the results of bending tests showing the influence of sheet surface texture, tool material and process conditions. It was found that the influence of punch, die clearance and tool material had an effect upon the scratch characteristic.

• 대한안전경영과학회지
• /
• 제17권4호
• /
• pp.207-212
• /
• 2015

When performing Chest x-ray examination to pregnant woman, normally we shield back side of abdomen. In this situation, scattered rays made by equipment and surrounding structure can enter front side of abdomen. Therefore, in this study, we evaluate suitability of abdomen shield especially to pregnant woman. In case of One shielding material placed back of abdomen, the measured value is $0.676{\pm}0.19uSv/hr$. Two shielding material is $0.764{\pm}0.04uSv/hr$. Three is $0.685{\pm}0.16uSv/hr$. The exposure dose inferred in this study does not excess annual effective dose limit. But It is not mean absolute safety. So we have to minimize occurrence of stochastic effect of radiosensitivity by shielding front side of abdomen of pregnant woman in clinic.

• 통상정보연구
• /
• 제9권4호
• /
• pp.241-261
• /
• 2007

9.11 terrors which happen in 2001 in the U.S. recognize importance about national security and Department of Commerce, country safety department, Federal Communication Commission(FCC) etc. are establishing RFID sticking plan in harbor exit and entrance container for this, and it is real condition that is preparing preparation of law and system that establishes harbor peace law(Safe Port Act) on October, 2006 and acts on for U.S. about container load cargo Europe and Asia each countries. These law and system is logistics security that strengthen search for import and export freight and security to main contents. To meet in these circumstance subsequent, this paper is to examine the following three themes. First, examined necessity of logistics security and logistics security strengthening tendency, and second, examined in achievement of logistics business and RFID, and third, presented logistics security process that utilize change of realization about logistics security and RFID's role for logistics security. Through upper investigation, this paper suggested the realization about logistics security raising, logistics security connection system construction by export step, real-time freight chase that use RFID, construction necessity of executive system and development of logistics security equipment required.

• 한국융합학회논문지
• /
• 제13권3호
• /
• pp.91-103
• /
• 2022

본 연구는 COVID-19 발생 전후에 작업치료를 수행하고 있는 작업치료사 101명을 대상으로 손 씻기, 개인 보호 장비 사용, 주변 환경 정리의 감염관리에 대한 인식과 수행을 비교하고자 설문조사를 실시했으며, 맨-휘트니 U 검정(Mann-Whitney U test), 크루스칼-왈리스 H 검정(Kruskal-wallis H test), 윌콕슨 부호 순위 검정(Wilcoxon signed-rank test), 피어슨 상관분석(Pearson's correlation coefficient)을 사용해 분석하였다. 그 결과, COVID-19 발생 이전보다 발생 이후에 감염관리 교육을 더 잘 받았고 감염성 질환의 경험이 낮은 것으로 확인되었다. 또한, COVID-19 발생 이전보다 발생 이후에 손 씻기, 개인 보호장비 사용, 주변 환경정리에서의 감염관리에 대한 인식 및 수행이 향상된 것으로 나타났다. 하지만 현재까지도 질병관리청에서 권고하는 흐르는 물에서 40초 이상의 손 씻기와 치료실 청소 및 치료 도구의 소독은 개선이 필요한 실정이다. 본 연구를 통하여 감염성 질환의 발생을 최소화하기 위해 감염관리 교육을 정기적으로 반복해야 하며, 향후 작업치료사를 대상으로 하는 감염관리 교육 및 후속 연구에서 활용할 수 있는 기초자료가 될 수 있을 것이다.

• Nuclear Engineering and Technology
• /
• 제53권8호
• /
• pp.2682-2695
• /
• 2021

This paper aims to evaluate the structural dynamic responses and damage/failure of the nuclear fuel reprocessing plant under the free drop impact of spent fuel cask (SFC) and fuel assembly (FA) during the on-site transportation. At the present Part I of this paper, the large-scale SFC model free drop test and the corresponding numerical simulations are performed. Firstly, a composite target which is composed of the protective structure, i.e., a thin RC plate (representing the inverted U-shaped slab in the loading shaft) and/or an autoclaved aerated concrete (AAC) blocks sacrificial layer, as well as a thick RC plate (representing the bottom slab in the loading shaft) is designed and fabricated. Then, based on the large dropping tower, the free drop test of large-scale SFC model with the mass of 3 t is carried out from the height of 7 m-11 m. It indicates that the bottom slab in the loading shaft could not resist the free drop impact of SFC. The composite protective structure can effectively reduce the damage and vibrations of the bottom slab, and the inverted U-shaped slab could relieve the damage of the AAC blocks layer dramatically. Furthermore, based on the finite element (FE) program LS-DYNA, the corresponding refined numerical simulations are performed. By comparing the experimental and numerical damage and vibration accelerations of the composite structures, the present adopted numerical algorithms, constitutive models and parameters are validated, which will be applied in the further assessment of drop impact effects of full-scale SFC and FA on prototype nuclear fuel reprocessing plant in the next Part II of this paper.

• 한국압력기기공학회 논문집
• /
• 제18권2호
• /
• pp.87-100
• /
• 2022

Unit capacity factor (utilization rate) of nuclear power plants (NPPs) is an important performance indicator. Since the first commercial operation of Kori Unit 1 began in April 1978, the utilization rate of domestic NPPs has gradually increased, reaching 90% from the end of the 1990s. However, due to various issues such as the Fukushima accident in 2011, corrosion of the CLP, the utilization rate dropped to 65~80%. In the early 1980s, the utilization rate of the U.S. NPPs was around 60%. However, since 2004, it has been consistently maintained above 90%. Therefore, in this study, we first examined the causes of declining the utilization rate in domestic NPPs. Next, the significances of the utilization rates are reviewed in five aspects: investment capability, electricity rate, safety and export, etc., with discussion on the current status of the utilization rates in the U.S. Based on this, three key factors are derived as the reasons of the increasing: equipment reliability program, on-line maintenance and the pursuit of institutional rationality. And finally, by synthesizing above results, the measures for increasing the utilization rate of domestic NPPs are proposed in terms of equipment management, institutional improvements, and personnel resources.

• 통상정보연구
• /
• 제8권4호
• /
• pp.89-104
• /
• 2006

Though weight manufacturing has in national gross production is decreasing, it has still a decisive role in economic growth of Korea, and foreign competitiveness of manufacturing has a great influence on our whole economy. Therefore, as this study speculates export competitiveness of manufacturing item by item, the results can be used for selection of strategic export-oriented products. The results of the analysis are summarized as follows: first, products that are found as competitive through analysis of trade specialization indexes are plastic, rubber, fabric, home electronic appliances, computers, communication equipment, automobiles and their spare parts. Second, electronic-electric industry such as semi-conduits, communication equipment, home electronics, computers was decided as advantageous through analysis of comparative advantages at present, while paper, print and publishing, and leather industries were classified as comparatively disadvantageous. Its political implications are presented as follows: Private corporations should develop more advanced technology and government should give more support to secure export competitiveness of manufacturing toward America. Governmental policies should be prepared to induce consistent and daring investment to technology-intensive products for export products with high-added value.