• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2293-2302
• /
• 2013

Flood inundation map has been used as a fundamental information in flood risk management. However, there are various sources of uncertainty in flood inundation mapping, which can be another risk in preventing damage from flood. Therefore, it is necessary to remove or reduce uncertainty sources to improve the accuracy of flood inundation maps. However, the entire removal of uncertainty source may be impossible and inefficient due to limitations of knowledge and finance. Sensitivity analysis of uncertainty sources allows an efficient flood risk management by considering various conditions in flood inundation mapping because an uncertainty source under different conditions may propagate in different ways. The objectives of this study are (1) to perform sensitivity analysis of uncertainty sources by different conditions on flood inundation map using the FOA method and (2) to find a major contributor to a propagated uncertainty in the flood inundation map in Flatrock at Columbus, U.S.A. Result of this study illustrates that an uncertainty in a variable is differently propagated to flood inundation map by combination with other uncertainty sources. Moreover, elevation error was found to be the most sensitive to uncertainty in the flood inundation map of the study reach.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.4
• /
• pp.131-144
• /
• 2015

This research proposes a prototype for visualizing radar rainfall data using the unity 3D engine. The mashup of radar data with topographic information is necessary for the 3D visualization of the radar data with high quality. However, the mashup of a huge amount of radar data and topographic data causes the overload of data processing and low quality of the visualization results. This research utilized the Unitiy 3D engine, a widely used engine in the game industry, for visualizing the 3D topographic data such as the satellite imagery/the DEM(Digital Elevation Model) and radar rainfall data. The satellite image segmentation technique and the image texture layer mashup technique are employed to construct the 3D visualization system prototype based on the topographic information. The developed protype will be applied to the disaster-prevention works by providing the radar rainfall data with the 3D visualization based on the topographic information.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.1
• /
• pp.180-196
• /
• 2016

To minimize the damage from disasters, various aspects of prevention, preparation, and response, etc. are being managed. Even though prevention and preparation are well conducted, irresistible calamities such as natural disasters may cause unexpected damage. Therefore, a system that can share the identical disaster information based on prompt disaster management and prediction must be developed and constructed for integrated disaster management. Especially, for a prompt disaster response, the same information needs to be shared between the related organization and the disaster prevention personnel such as on-site officials. Recent disaster management systems use high-capacity geographic information or other various factors for accurate disaster predictions. In case of using a recently constructed or researched 3D GIS, the system may not be used in some cases due to conflicts with hardware, etc. Thus, even though response information is secured using prediction simulation in advance, it is essentially difficult in some cases to share the common information when the system cannot be utilized or the extension of the corresponding data cannot be read. Therefore, this study aims to construct a system for dealing with disasters that shares the same prompt and accurate information in compliance with common data formats. The system is expected to reduce the existing disaster response time and minimize human and physical damage by assisting decision making through prompt responses.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.28 no.2
• /
• pp.57-78
• /
• 2017

SNS is a useful tool to quickly deliver information in an emergency given their speed and expandability. Especially, SNS in the event of a disaster or an accident can offer on-site, accurate and detailed updates about essential information such as the safety of victims and the development of the situation, served as a valuable complement to the conventional media. This study aims to perform a comparative analysis on how social media are currently used by emergency management authorities in South Korea and other countries. Based on the results, this study proposed more effective ways to exploit SNS and improve efficiency of disaster management. To accomplish the goals, this study collected tweet information from various sources including the FEMA of the U. S., the FDMA and the Central Disaster Council of Japan, and the MPSS of Korea. The collected tweet information was analyzed by feedback, time series, and information types. The feedback analysis aims to quantify the number of monthly user feedback in order to assess user satisfaction about the tweet information. The time series analysis identifies the number of tweet information, feedback index and keywords by country for certain duration, examining why certain messages showed high feedback indices and what kind of contents should be offered by the authorities. Finally, the analysis of information type reviews the type of information contained in the tweet information that drew users' attention to identify the information type in which the authorities should deliver information to users. Based on these analyses, this study proposed improvement methods to use Tweeter in MPSS.

• Journal of the Society of Disaster Information
• /
• v.19 no.3
• /
• pp.698-709
• /
• 2023

Purpose: In this paper, we would like to analyze the growth rate of existing urban immersion in the downstream during large-scale urban development and the degree of reduction in existing urban immersion in the downstream when small excellent storage facilities are planned in apartment complexes. Method: A large-scale sewage model was built using the SWMM model of the U.S. Environmental Protection Agency, and the impact of flooding in existing downtown areas downstream was analyzed through simulation. The built model included the development zone, the existing downtown area downstream, and the entire river basin that discharges rainwater. Result: As a result of calculating and simulating the minimum excellent reservoir capacity for each apartment block in the study target area, it was found that the immersion of 4,893㎥ based on one hour, 25,815㎥ based on two hours, and 55,528㎥ based on three hours in the downstream urban area. Conclusion: As in this study, large-scale flooding simulation considering the existing downtown area in the downstream shows a significant increase in flooding in the downstream, and if excellent reservoir capacity is planned for each apartment block before development and the construction of excellent reservoirs is recommended.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.2
• /
• pp.171-179
• /
• 2023

Due to man-made climate change, global abnormal weather phenomena have occurred, increasing disasters. Major developed countries(military) are preparing for disasters caused by extreme weather appearances. However, currently, disaster prevention plans and facilities have been implemented based on the frequency and intensity method based on statistical data, it is not enough to prepare for disasters caused by frequent extreme weather based on probability basis. The U.S. and British forces have been the fastest to take research and policy approaches related to climate change and the threat of disaster change, and are considering both climate change mitigation and adaptation. The South Korean military regards the perception of disasters to be storm and flood damage, and there is a lack of discussion on extreme weather and disasters due to climate change. In this study, the process of establishing disaster management systems in developed countries(the United States and the United Kingdom) was examined, and the response policies of each country(military) were analyzed using literature analysis techniques. In order to maintain tight security, our military should establish a response policy focusing on sustainability and resilience, and the following three policy approaches are needed. First, it is necessary to analyze the future operational environment of the Korean Peninsula in preparation for the environment that will change due to climate change. Second, it is necessary to discuss climate change 'adaptation policy' for sustainability. Third, it is necessary to prepare for future disasters that may occur due to climate change.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.19 no.3
• /
• pp.75-85
• /
• 2017

A method to estimate hourly temperature profiles on calm and clear nights was developed based on temporal changes of inversion height and strength. A meteorological temperature profiler (Model MTP5H, Kipp and Zonen) was installed on the rooftop of the Highland Agriculture Research Institute, located in Daegwallyeong-myeon, Pyeongchang-gun, Gangwon-do. The hourly vertical distribution of air temperature was measured up to 600 m at intervals of 50 m from May 2007 to March 2008. Temperature and relative humidity data loggers (HOBO U23 Pro v2, Onset Computer Corporation, USA) were installed in the Jungdae-ri Valley, located between Gurye-gun, Jeollanam-do and Gwangyang-si, Jeollanam-do. These loggers were used to archive measurements of weather data 1.5 m above the surface from October 3, 2014, to November 23, 2015. The inversion strength was determined using the difference between the temperature at the inversion height, which is the highest temperature in the profile, and the temperature at 100 m from the surface. Empirical equations for the changes of inversion height and strength were derived to express the development of temperature inversion on calm and clear nights. To estimate air temperature near the ground on a slope exposed to crops, the equation's parameters were modified using temperature distribution of the mountain slope obtained from the data loggers. Estimated hourly temperatures using the method were compared with observed temperatures at 19 weather sites located within three watersheds in the southern Jiri-mountain in 2015. The mean error (ME) and root mean square error (RMSE) of the hourly temperatures were $-0.69^{\circ}C$ and $1.61^{\circ}C$, respectively. Hourly temperatures were often underestimated from 2000 to 0100 LST the next day. When temperatures were estimated at 0600 LST using the existing model, ME and RMSE were $-0.86^{\circ}C$ and $1.72^{\circ}C$, respectively. The method proposed in this study resulted in a smaller error, e.g., ME of $-0.12^{\circ}C$ and RMSE of $1.34^{\circ}C$. The method could be improved further taking into account various weather conditions, which could reduce the estimation error.

• Journal of Wetlands Research
• /
• v.25 no.2
• /
• pp.75-82
• /
• 2023

Data for measuring the flow rate of streams are used as important basic data for the development and maintenance of water resources, and many experts are conducting research to make more accurate measurements. Especially, in Korea, monsoon rains and heavy rains are concentrated in summer due to the nature of the climate, so floods occur frequently. Therefore, it is necessary to measure the flow rate most accurately during a flood to predict and prevent flooding. Thus, the U.S. Geological Survey (USGS) introduces 1, 2, 3 point method using a flow meter as one way to measure the average flow rate. However, it is difficult to calculate the average flow rate with the existing 1, 2, 3 point method alone.This paper proposes a new 1, 2, 3 point method formula, which is more accurate, utilizing one probabilistic entropy concept. This is considered to be a highly empirical study that can supplement the limitations of existing measurement methods. Data and Flume data were used in the number of holesman to demonstrate the utility of the proposed formula. As a result of the analysis, in the case of Flume Data, the existing USGS 1 point method compared to the measured value was 7.6% on average, 8.6% on the 2 point method, and 8.1% on the 3 point method. In the case of Coleman Data, the 1 point method showed an average error rate of 5%, the 2 point method 5.6% and the 3 point method 5.3%. On the other hand, the proposed formula using the concept of entropy reduced the error rate by about 60% compared to the existing method, with the Flume Data averaging 4.7% for the 1 point method, 5.7% for the 2 point method, and 5.2% for the 3 point method. In addition, Coleman Data showed an average error of 2.5% in the 1 point method, 3.1% in the 2 point method, and 2.8% in the 3 point method, reducing the error rate by about 50% compared to the existing method.This study can calculate the average flow rate more accurately than the existing 1, 2, 3 point method, which can be useful in many ways, including future river disaster management, design and administration.