• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.15-19
• /
• 2001

A dedicated reverse engineering(RE) system for rapid manufacturing of human head in a 3D bust has been developed. The first step in the process is to capture the surface details of a human head and shoulder by three scanners based upon the digital moire fringe technique. Then the multiple scans captured from different angles are aligned and merged into a single polygonal mesh, and the aligned data set is refined by smoothing, subdividing or hole filling process. Finally, the refined data set is sent to a 4-axis computer numerically control(NC) machine to manufacture a replica. In this paper, we mainly describe on the algorithms and software for aligning multiple data sets. The method is based on the recently popular Iterative Closest Point(ICP) algorithm that aligns different polygonal meshes into one common coordinate system. The ICP algorithm finds the nearest positions on one scan to a collection of points on the other scan by minimizing the collective distance between different scans. We also integrate some heuristics into the ICP to enhance the aligning process. A typical example is presented to validate the system and further research work is also discussed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.603-608
• /
• 2001

In order to distinguish fault electric motors automatically in real time. an intelligent diagnosis technique may be required. This paper presents an automatic fault detection system for electric motors by using their acoustic noises. Time signals of each candidate motor were measured in an anechoic chamber for further analysis. Spectral analysis was first carried out and they showed that two typical types of fault motors could be successfully distinguished in the frequency domain; bearing faults and scratches. Unlike the trend of normal motors that shows only a single dominant peak at around 2000 ㎐, several peaks are bunched together in bearing fault motors. On the other hand, large frequency noises at around 6500 ㎐ are newly arisen in scratchy fault motors. However, the processing time for spectral analysis was rather long for a real time application in production lines. Thus, a number of band-pass filters were used in the time domain instead for a real time application. Before applying filters, the bands of filters were set from the information of spectral analysis. By applying a set of band-pass filters, the RMS values of each filtered signal were calculated, and thus the normal and damaged motors could be successfully distinguished.

• 대한가정학회지
• /
• 제35권5호
• /
• pp.141-150
• /
• 1997

The purpose of this study was the development of the parenting stress scale, necessary to understand the details of the difficulties for a working mother having children from infant to preschooler. Relevant works were reviewed to collect 44 items for the questionnaire from the previous researchs, and additional 34 are combined as a set of measure items. The 78 items were analyzed for the fitness of structure based on the chi-square test and Cramer's V coefficients, and 35 were selected as a final set for the questionnaire. Further factor analysis on the 35 items showed that they could be selected 32 items of the 35 item scale and composed of 3 subscales; namely, the first factor(12 items) as‘typical stress due to the parenting’, the second(12 items) as‘pressures pertaining to the parental role and distress’, and the third(8 items) as’guilty to the parenting by others’. This final questionnaire composed of 32 items was also tested for the concurrent validity based on Pearson's correlation with Goldberg's General Health Questionnaire (GHQ), which is a well-known index to represent the socio-psychological stress. The correlation factor is .41(p＜.001), which justifies the fitness of the newly designed questionnaire. To find the confidence level, the Cronbach α was evaluated, which results .88 for the overall questionnaire and ranges between .76 and .82 for each subcale. This parenting scale can be also utilized as a measure to exploit proper programs for the parent-child relations, parent education and rehabitilation of the family function.

• Steel and Composite Structures
• /
• 제34권4호
• /
• pp.547-559
• /
• 2020

Buckling restrained braces (BRBs) were developed as an enhanced alternative to conventional braces by restraining their global buckling, thus allowing development of a stable quasi-symmetric hysteretic response. A wider adoption of buckling restrained braced frames is precluded due to proprietary character of most BRBs and the code requirement for experimental qualification. To overcome these problems, BRBs with capacities corresponding to typical steel multi-storey buildings in Romania were developed and experimentally tested in view of prequalification. The first part of this paper presents the results of the experimental program which included sub-assemblage tests on ten full-scale BRBs and uniaxial tests on components materials (steel and concrete). Two different solutions of the core were investigated: milled from a plate and fabricated from a square steel profile. The strength of the buckling restraining mechanism was also investigated. The influence of gravity loading on the unsymmetrical deformations in the two plastic segments of the core was assessed, and the response of the bolted connections was evaluated. The cyclic response of BRBs was evaluated with respect to a set of performance parameters, and recommendations for design were given.

• 한국철도학회논문집
• /
• 제12권3호
• /
• pp.342-347
• /
• 2009

고장모드, 영향 및 임계분석(FMECA)은 시스템의 구성요소가 갖는 잠재적인 고장모드와 각 고장모드가 시스템에 미치는 영향을 평가하는 도구로 활용된다. 일반적으로 FMECA는 관련 전문가들의 의견에 따라 고장모드의 심각도와 치명도를 평가하여 이를 위험도 매트릭스의 양축으로 나타냄으로써 중요한 고장모드에 대한 분석을 수행한다. 그러나 이러한 절차는 평가가 전문가의 주관에 의해 이루어져 결과에 불확실성이 포함될 수밖에 없다. 따라서 본 논문에서는 최소절단집(MCS)와 퍼지이론을 이용한 새로운 FMECA 절차를 제안한다. 심각도 평가에 있어서는 MCS를 이용함으로써 객관적인 구조적 중요도를 평가할 수 있게 하였고, 치병도의 평가에서는 설비의 대표적인 고장률을 이용하였다. 그리고 두 지수를 종합하기 위해 퍼지 전문가 시스템을 구성하여 종합적인 위험도를 평가하였다.

• Spatial Information Research
• /
• 제7권2호
• /
• pp.223-236
• /
• 1999

본 연구는 최근 시설의 확충이 절실히 요구됨에서 불구하고 사회적 기피시설로 인식되어 그 입지를 둘러싸고 많은 사회적 문제를 일으키고 있는 쓰레기 소각장의 후보입지를 선정하는데 있어서 보다 유연성있고 객관적인 방법론을 도입하여 의사결정을 위한 지원시스템으로의 GIS 기능을 높이려는데 목적을 두었다. 본 연구에서는 종전의 입지분석시에 주로 많이 활동된 부울 논리에 의한 단순 도면중첩기능의 문제점을 제시하고 쓰레기 소각장의 입지를 선정하는데 있어서 퍼지집합(Fuzzy Set) 과 계층분석과정(AHP : Anlaystic Hierarchy Process) 이론을 활용하여 후보 입지들에 대한 적합도 수준을 평가하는데 보다 유연성을 l할수 있는 방법론을 모색하였다. 특히 본 연구는 쓰레기 소각장의 후보입지들을 선정하는데 있어서 어떠한 요인을 기회요인으로 하였는가, 또한 각 요인들에 대한 상대적 중요성, 즉 가중치를 어떻게 설정하였는가에 따라서 다양한 결과들이 추출될 수 있음을 제시하려는데 초점을 두었다.

• 한국통신학회논문지
• /
• 제32권1A호
• /
• pp.44-50
• /
• 2007

일반적으로 MC-CDMA 시스템에서 동일한 부반송파 집합이 할당된 서로 다른 단말기에게 스크램블링 부호를 할당할 때에는 해당 셀에 주어진 스크램블링 부호 집합 중에서 서로 다른 스크램블링 부호를 임의로 선택하여 할당한다. 주파수 영역 스크램블링 부호로서 직교 부호가 사용되는 경우, 타이밍 및 주파수 동기가 완벽하고 채널특성이 편평하다면 스크램블링 부호간의 직교성으로 인하여 스크램블링 부호의 선택에 따라 수신 성능이 영향을 받지 않지만, 실제 동작 환경에서는 스크램블링 부호간 직교성이 깨져서 부호간 간섭이 발생하는 경우가 많이 발생한다. 본 논문에서는 타이밍 오차가 존재하는 경우에 대해 MC-CDMA에서의 주파수 영역 직교 스크램블링 부호의 최적 할당순서를 도출한다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.370-375
• /
• 2006

This paper suggests the method for estimating a partial discharge (PD) location using divide of the inside transformer as a grid. The PD location is found swiftly and economically compared with the typical method detecting a PD. The reason is that the location of PD is detected in the section. The estimation of PD location is trained using the Neural Network. JavaNNS(Java Neural Network Simulator) and SNNS(Stuttgart Neural Network Simulator) are used for searching the location of PD. The simulation procedure is following, The transformer is assumed that the case is a regular hexahedron. The sensor is installed in a proper location. A section of PD location is set as a target, and training set is studied with several PD locations in the inside of the transformer. As a result of training process, the learning capability of neural network is excellent. The PD location is detected by division of internal structure of transformer and application of neural network.

• 대한원격탐사학회지
• /
• 제5권2호
• /
• pp.109-122
• /
• 1989

The ISODATA method, which is one of the most famous of the square-error clustering methos, has been applied to two Chungju multivariate data sets in order to evaluate the effectiveness of the regional lithological mapping. One is an airborne radiometric data set and the other is a mixed data set of the airborne radiometric and Landsat TM data. In both cases, the classification of the Bulguksa granite and the Kyemyongsan biotite-quartz gneiss are the most successful. Hyangsanni dolomitic limestone and neighboring Daehyangsan quartzite are also classified by their typical lowness of the radioactive intensities, though it is still confused with some others such as water-covered areas and nearby alluvials, and unaltered limestone areas. Topographically rugged valleys are also classified as the same cluster as above. This could be due to unavoidable variations of flight height and the attitude of the airborne system in such rugged terrains. The regional geological mapping of sedimentary rock units of the Ockchun System is in general confused. This might be due to similarities between different sediments. Considarable discrepancies occurred in mapping some lithological boundaries might also be due to secondary effects such as contamination or smoothing in digitizing process. Further study should be continued in the variable selection scheme as no absolutely superior method claims to exist yet since it seems somewhat to be rather data dependent. Study could also be made on the data preprocessing in order to reduce the erratic effects as mentioned above, and thus hoprfully draw much better result in regional geological mapping.

• Earthquakes and Structures
• /
• 제16권2호
• /
• pp.165-175
• /
• 2019

Incremental dynamic analysis (IDA), as an accurate method to evaluate the parameters of structural performance levels, requires many non-linear time history analyses, using a set of ground motion records which are scaled to different intensity levels. Therefore, this method is very computationally demanding. In this study, a new method is presented to estimate the summarized (16%, 50%, and 84% fractiles) IDA curves of a first-mode dominated structure using discrete wavelet transform and bees optimization algorithm. This method reduces the number of required ground motion records for the prediction of the summarized IDA curves. At first, a subset of first list ground motion records is decomposed by means of discrete wavelet transform which have a low dispersion estimating the summarized IDA curves of equivalent SDOF system of the main structure. Then, the bees algorithm optimizes a series of factors for each level of detail coefficients in discrete wavelet transform. The applied factors change the frequency content of original ground motion records which the generated ground motions records can be utilized to reliably estimate the summarized IDA curves of the main structure. At the end, to evaluate the efficiency of the proposed method, the seismic behavior of a typical 3-story special steel moment frame, subjected to a set of twenty ground motion records is compared with this method.