• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.4
• /
• pp.161-168
• /
• 2009

We demonstrated $\check{S}$olc-type wavelength filters in periodically poled Ti-diffused lithium-niobate channel optical waveguide (Ti:PPLN). A $\check{S}$olc-type transmission spectrum based on the polarization-mode conversion was observed experimentally in PPLN with period 16.6${\mu}m$. A reasonable explanation of such a phenomenon was presented. A polarization-mode converted transmission peak was observed at wavelength 1272.49nm. The FWHM and sidelobe of spectrum are about 0.23nm and 7 dB, respectively.

• Journal of Korean Academy of Nursing
• /
• v.38 no.4
• /
• pp.522-532
• /
• 2008

Purpose: The purpose of this study was to identify the types of anger expression in adolescent women. Methods: The Q-Methodology which provides a method of analyzing the individual's subjectivity was used. The 32 subjects classified 50 selected Q-statements on a 9 point scale to make a normal distribution. The collected data was analyzed by a PC-QUANL program. Results: Five types of anger expression in adolescent women were identified. Type I: Direct attacking expression type, Type II: Mature consideration type, Type III: Passive indirect expression type, Type IV: Avoidance conversion type, and Type V: Expression control type. Conclusion: This study revealed that different approaches of nursing intervention strategies are recommended based on the five types of anger expression and their characteristics.

• Plant Biotechnology Reports
• /
• v.5 no.2
• /
• pp.127-134
• /
• 2011

The biotransformation potential of cell suspension cultures generated from Withania somnifera leaf was investigated, using withanolides, i.e. withanolide A, withaferin A, and withanone as precursor substrates. Interestingly, the cell suspension cultures showed inter-conversion of withanolides, as well converted to some unknown compounds, released to the culture media. The bio-catalyzed withanolide was detected and quantified by TLC and HPLC, respectively. There is noticeable conversion of withanolide A to withanone, and vice versa though at a lower level. The type of reaction of this biotransformation appears to be substitution of 20-OH group to 17-OH in withanolide A. In this paper, we present for the first time the possibility of biotransformation by inter-conversion of withanolides of pharmacological importance through cell suspension culture of W. somnifera. The possible role of putative cytochrome $P_{450}$ hydroxylases is implicated in the conversion.

• Journal of KIBIM
• /
• v.6 no.2
• /
• pp.47-57
• /
• 2016

Recently, the introduction and spread of BIM technology has been actively promoted at the domestic level and abroad. However, the BIM adoption and diffusion rate in the whole construction industry has been slower than expected, this is because they applied to construction projects in a way that does not meet the basic objective of BIM adoption. The objective of this paper is to derive a BIM adoption strategy that can provide benefits and efficiency from the design phase, by analyzing issues related to design errors identified in two real world projects based on the 2D to BIM conversion process. Types of issues, type distribution, and degree of BIM contribution to find issues were analyzed in a quantitative way, and then a BIM adoption strategy was derived. As a result, this paper identified that there obviously exists a limit in the 2D to BIM conversion process by repeating the problems that occur in the traditional 2D design process. Therefore, the authors of this paper insist that the design firms should adopt BIM-based design processes, fully, to get financial benefits as well as to improve the design quality.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.83-86
• /
• 2006

In this study, the syngas producing facility that consists of pulverized coal feeding/gasification and hot gas clean-up system was tested for Indonesian subbituminous coal. And the DME conversion facilities have been developed and tested for converting syngas to DME by reactions with catalysts. So, the entrained-bed slagging type pi lot scale coal gasifier was operated normally in the temperature range of $1,400{\sim}1,450^{\circ}C,\;7{\sim}8kg/cm^2$ pressure. And Roto middle coal produced syngas that has a composition of $36{\sim}38%$ CO, $14{\sim}16%\;H_2,\;and\;5{\sim}8%\;CO_2$. Particulates in syngas were 99.8% removed by metal filters. $H_2S$ composition in syngas was also desulfurized by the Fe chelate system to yield less than 0.1 ppm level. When the clean syngas $70{\sim}100 Nm^3/h$ was provided to DME conversion rector, normally operated in the temperature range of $230{\sim}250^{\circ}C$ and $60kg/cm^2$ pressure, 4.5% DME was yielded.

• Journal of Broadcast Engineering
• /
• v.7 no.3
• /
• pp.219-228
• /
• 2002

In this paper, we propose a new method of converting 2D video into 3D stereoscopic video, called stereoscopic conversion. In general, stereoscopic images are produced using the motion informations. However unreliable motion informations obtained especially from block-based motion estimation cause the wrong generation of stereoscopic images. To solve for this problem, we propose a stereoscopic conversion method based upon the utilization of key frame that has the better accuracy of estimated motion informations. As well, as generation scheme of stereoscopic images associated with the motion type of each key frame is proposed. For the performance evaluation of our proposed method, we apply it to five test images and measure the accuracy of key frame-based stereoscopic conversion. Experimental results show that our proposed method has the accuracy more than about 90 percent in terms of the detection ratio of key frames.

• KIISE Transactions on Computing Practices
• /
• v.22 no.11
• /
• pp.559-566
• /
• 2016

Excel is a commercially available computer program that is used worldwide. Excel is widely utilized; it is helpful in household ledgers, corporate tax calculations, management of academic grades or reports, etc. However from the beginning, inaccuracies and errors in calculations have constantly been identified, so the program is updated regularly. Decimal-to-binary conversion is a simple and repetitive task. So, use of a computer program to do this calculation is suitable. Errors in decimal-to-binary conversion are surprising and are not easily understood. Therefore, it is important to identify the flaws in Excel, which unfortunately still exist today. It is necessary to determine the cause of this type of error, and I hope for a fix to be implemented quickly.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1318-1323
• /
• 2010

A lot of demand for parts of millimeter wave band, as would be expected 57~63 GHz band down conversion mixer was designed and fabricated using IHP 0.25 um SiGe process. Designed and fabricated mixer was double balanced type and located reduced 3D balun at RF port and buffer amplifier at outport for suppression LO signal and conversion gain. Fabricated mixer measured conversion gain of 13.8 dB, $P1dB_{in}$ -17 dBm and 88 mA of current consumption characteristics, respectively.

• International Journal of Highway Engineering
• /
• v.17 no.3
• /
• pp.1-12
• /
• 2015

PURPOSES : This paper presents a description of the current issues facing road managers regarding the surface-type conversion of low-volume roads for cost savings. METHODS: The paper reviews previous works conducted toward this end, acknowledges gaps in the current research, and lays out what information is needed for further studies. RESULTS : If the cost to maintain an unsurfaced road is less than the cost of maintaining a surfaced road, then there is potential for cost savings for the management agency. However, the problem is bigger than simply maintaining the roads that already exist. If unsurfaced roads prove to be more economical than surfaced roads, then the cost to convert from a surfaced to an unsurfaced roadway, and vice versa, when necessary, must also be examined. CONCLUSIONS : No other studies have addressed the un-surfacing of a road for cost savings, and it is therefore unknown whether substantial savings can be realistically obtained by converting from a surfaced to an unsurfaced road. To determine whether a conversion policy would be a viable option, additional data and research are needed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.4
• /
• pp.599-609
• /
• 2000

In this paper, sub-harmonically pumped single balanced resistive mixers are presented . Frequency bandwidth is selected for a Ku-band, which is 11.75-12.25GHz for RF, 5.375∼5.625 GHz for LO, and 1 GHz for IF signals. A rat-race hybrid is designed for the accomplishment of single balanced type. A low pass filter (LPF) with photonic band gap(PBG) structure is used for good conversion loss and unwanted harmonics suppression. Two types of mixers are suggested, which are one with no gate bias for no DC power consumption and the other with the IF amplifier for conversion gain. When a LO signal with the power of 6 dBm at 5.5 GHz is injected, a conversion loss of 12.17dB and a conversion gain of 7.83 dB are obtained for each mixer. For the both mixers , LO to RF isolation of 20 dB and LO to IF isolation of 60dB are obtained. With the RF power of -30dBm to -3dBm, the mixer shows linear characteristics region of IF. this mixer can be applied for Ku-band and other microwave communication systems.