• 한국염색가공학회지
• /
• 제15권5호
• /
• pp.316-320
• /
• 2003

In order to investigate the dyeing property of poly trimethylene terephthalate(PTT) fabric, the dyeing of PTT fabric was carried at under condition of different dyeing temperature by using several disperse dyes with different energy level. Particularly, this study discussed the PTT dyeing thermodynamically. Used disperse dyes were selected based on the their chemical structure and energy level. The obtained results were as followings; The dye adsorption of S type disperse dye such as C. I. Disperse Blue 79 increased with increasing dyeing temperature. In a exhaustion rate of PTT fabric with disperse dyes, C. I. Disperse Blue 56 showed higher values than that of C. I. Disperse Orange 29 and Blue 79. For the interpretation of thermodynamic dyeing behavior, the partition coefficient ( K ) and some several thermodynamic parameters such as standard affinity$(-\mu^\circ)$ and heat of dyeing$(\Delta{H}^\circ)$ calculated from the adsorption isotherm. From above results, as the energy level of disperse dye is small, the partition coefficient and standard affinity increased. But the heat of dyeing of PTT fabric with disperse dye showed high negative value in order of E type(C. I. Disperse Blue 56), SE type(C. I. Disperse Orange 29) and S type(C. I. Disperse 79).

• 분석과학
• /
• 제25권1호
• /
• pp.33-38
• /
• 2012

염화물 고정화능력의 중요성에도 불구하고 고정화능력을 측정하는 것은 어려우며 특히, 이미 건설되어 공용중인 구조물에서는 더욱 어렵다. 실제로 고정염화물을 측정하는 과정은 온도, 시료의 분말도, 공극수 추출기법 등과 같은 환경적 요인에 의해 큰 영향을 받는다. 본 연구에서는 X-선 회절분석법(XRD; X-ray diffraction)을 이용하여 콘크리트 내 염화물 이온의 고정화능력을 정량화하는 방법에 대해 중점을 두고 연구를 진행하였다. 염화물의 고정능력 isotherm은 물/시멘트비, 양생기간, 결합재 종류에 영향을 받으며 Langmuir isotherm 을 통하여 일단 결정된 고정염화물(Friedel 염)은 XRD를 이용하여 동시에 분석을 진행한다. XRD 그래프에서 나타난 고정염화물량의 피크 강도와 측정된 고정염화물의 총량의 관계를 결정한다. 결과적으로 양생기간이 증가될수록, 물/시멘트비가 감소될수록 고정화 능력은 증가하였다.

• Korean Chemical Engineering Research
• /
• 제60권3호
• /
• pp.377-385
• /
• 2022

우리나라 전통 숯가마로부터 제조된 숯의 표면형상과 흡착특성을 분석한 후, 습도와 온도를 조절하면서 이들의 수분 흡착성능을 측정하고 황토, 활성탄소섬유 직포 및 활성탄소섬유 종이의 수분 흡착성능과 비교하였다. 숯은 소수성이므로 45% 이하의 습도에서는 수분을 잘 흡착하지 않지만 습도가 증가하면 흡착성능이 서서히 1차식에 비례하여 증가하였다. 황토 분말도 낮은 습도에서는 숯과 유사했지만 습도가 증가하면 흡착성능이 기하급수적으로 증가하면서 Type V 등온흡착곡선을 보였다. 따라서 조선시대에 기상청 직원들이 숯과 황토의 수분 흡착능력을 일기예보에 적용하였다는 기록을 실험적으로 확인할 수 있었다. 활성탄소섬유 직포와 활성탄소섬유 종이는 수분 흡착능력이 월등하고 신속한 반응을 보이므로 습도측정 센서에 적용할 수 있다고 판단된다. 숯 조각의 등온흡착 및 탈착곡선 측정에서 흡착질인 질소의 탈착이 잘 이루어지지 않아 낮은 압력 이력현상(low-pressure hysteresis)이라는 독특한 Type I과 Type IV의 혼합형태를 보이는데, 이는 질소입자가 흡착시에 숯 세공의 틈새를 비비고 들어가 단단히 끼었다가 탈착시에 빠져나오지 않기 때문이다. 숯을 분말로 분쇄하면 이러한 틈새들이 분쇄되어 비표면적이 증가하고 낮은 상대압력에서 흡착질의 탈착량이 증가되었다.

• Carbon letters
• /
• 제8권1호
• /
• pp.17-24
• /
• 2007

Microporous carbons with narrow pore size distribution have been successfully synthesized by using hydrolyzed and calcined silica as templates and phenol formaldehyde (pf) resin as carbon precursor. Phenol formaldehyde-silica micro composites were prepared by solution route. Subsesequently, silica templates were removed by HF leaching. Resulting carbons were steam activated. The porous carbons were characterized by nitrogen adsorption-desorption isotherm, SEM, FTIR analysis, iodine adsorption, thermogravimetry analysis, etc. Adsorption isotherms show that the porous carbon prepared from calcined silica as templates are microporous with 88% pores of size <2 nm porosity and are of type I isotherm, while porous carbon prepared by using hydrolyzed silica are microporous with 89% microporosity, shows hysteresis loop at high relative pressure indicating the presence of some mesoporosity in samples. The microporosity in porous carbon materials has a bearing on the nature of silica templates used for pore formation.

• Corrosion Science and Technology
• /
• 제5권5호
• /
• pp.160-167
• /
• 2006

S-Acetyl Isothiourea Acetate (S-AITA) was synthesized in the laboratory and this influence on the inhibition of corrosion of mild steel in 1.11 N hydrochloric and 1.12 N sulphuric acids was investigated by weight loss and potentiostatic polarization techniques at 303K, 353K and 403K. These results were confirmed by the impedance technique. The inhibition efficiency increased with increase in concentration of inhibitor and decreased with rise in temperature from 303K to 403K. The maximum inhibition efficiency of S-AITA was found to be 99.95% (0.5% of S-AITA) at 303K in sulphuric acid. The adsorption of this compound on the mild steel surface from the acids has been found to obey Temkin's adsorption isotherm. The potentiostatic polarization results revealed that S-AITA was a mixed type inhibitor. Some thermodynamic parameters i.e., activation energy (Ea), free energy of adsorption (${\Delta}G_{ads}$), enthalpy of adsorption (${\Delta}H$) and entropy of adsorption (${\Delta}S$) were also calculated from weight loss data.

• 한국염색가공학회지
• /
• 제24권4호
• /
• pp.239-246
• /
• 2012

The binding isotherms of ionic dyes with Poly(vinylpyrrolidone) in aqueous solution were determined by the dynamic dialysis technique. The shape of the isotherms of cationic dye, C. I. Basic Red 18 with poly(vinlypyrrolidone) showed a partition type. It suggests that the binding involves a non-cooperative mode. Isotherms of an anion dye, a synthesized dye by coupling of diazotized m-trifluoromethylaniline with 2-naphthol-6-sulfonic acid, were sigmoid type and showed multimode interaction. The results were interpreted by the McGhee von Hippel theory. The thermodynamic parameters for the complex formation of the dyes-polymer were calculated from their temperature dependences of the intrinsic binding constant.

• Korean Membrane Journal
• /
• 제6권1호
• /
• pp.16-23
• /
• 2004

The silica containing carbon (C-SiO$_2$) membranes were fabricated using poly(imide siloxane) (PIS) having -CO- swivel group. The characteristics of porous C-SiO$_2$ structures prepared by the pyrolysis of poly(imide siloxane) were related with the micro-phase separation between the imide block and the siloxane block. Furthermore, the nitrogen adsorption isotherms of the CMS and the C-SiO$_2$ membranes were investigated to define the characteristics of porous structures. The C-SiO$_2$ membranes derived from PIS showed the type IV isotherm and possessed the hysteresis loop, which was associated with the mesoporous carbon structures, while the CMS membranes derived from PI showed the type I isotherm. For the molecular sieving probe, the C-SiO$_2$ membranes pyrolyzed at 550, 600, and 700$^{\circ}C$ showed the O$_2$ permeability of 924, 1076, and 367 Barrer (1 ${\times}$ 10$\^$-10/㎤(STP)cm/$\textrm{cm}^2$$.$s$.$cmHg) and O$_2$/N$_2$ selectivity of 9, 8, and 12.

• Journal of Electrochemical Science and Technology
• /
• 제12권3호
• /
• pp.365-376
• /
• 2021

Two arylamino substituted mercaptoimidazole derivatives namely 4,5-dimethyl-1-(phenylamino)-1H-imidazole-2(3H)-thione (I1) and 4,5- dimethyl-1-((p-chlorophenyl)amino)- 1H-imidazole-2(3H)-thione (I2) were synthesized and investigated as corrosion inhibitors for carbon steel in 0.5 M HCl solution by means of electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, ATR-FTIR spectroscopy and SEM. The results showed that the investigated mercaptoimidazole derivatives act as mixed type inhibitors and inhibition efficiency follows the I2>I1 order. Adsorption of inhibitors on metal surface was found to obey the Langmuir adsorption isotherm. Thermodynamic parameters revealed that adsorption of the inhibitors has both physisorption and chemisorption adsorption mechanism. Electrochemical test results were supported by quantum chemical parameters obtained from DFT calculations.

• 분석과학
• /
• 제13권5호
• /
• pp.573-583
• /
• 2000

몇 가지 식물섬유, 합성섬유 및 혼합섬유를 원료로 하여 비표면적 차이가 나는 세가지 등급의 활성탄소섬유를 제조하고 입상활성탄을 대조흡착제로 하여 페놀 및 메틸렌블루의 액상흡착특성을 비교 검토하였다. 이들 흡착질 수용액의 활성탄소섬유에 대한 흡착등온선, 흡착속도 및 컬럼통액실험을 통하여 돌파점곡선을 측정하였다. 페놀 및 메틸렌블루의 흡착등온은 모두 type I을 나타내었으며 낮은 평형농도에서도 높은 흡착량을 나타내었다. 흡착질에 대한 활성탄소섬유의 흡착속도는 활성탄에 비하여 100배 이상 빠른 흡착속도를 보이며 유효확산계수도 20배 이상 높았다. 컬럼통액 실험결과 활성탄소섬유의 흡착용량은 활성탄에 비해 10배 이상으로 나타났다. 유해성 유기 오염물질 10종을 포함한 조제수를 자연여과방식으로 50 L씩 처리한 결과 2단에서 이들 유기성 오염물질을 완전히 제거하여 활성탄에 비하여 수처리 효율이 훨씬 높은 결과를 보였다.

• 대한화학회지
• /
• 제57권1호
• /
• pp.25-34
• /
• 2013

The efficiency of three complex surfactants based on sunflower oil and nitrogen containing compounds as corrosion inhibitors for mild steel in $CO_2$-saturated 1% NaCl solution, has been determined by weight loss and LPR corrosion rate measurements. These compounds inhibit corrosion even at very low concentrations. The inhibition process was attributed to the formation of an adsorbed film on the metal surface that protects the metal against corrosive media. The inhibition efficiency increases with increasing the concentration of the studied inhibitors. Maximum inhibition efficiency of the surfactants is observed at concentrations around its critical micellar concentration (CMC). Adsorption of complex surfactants on the mild steel surface is in agreement with the Langmuir adsorption isotherm model, and the calculated Gibbs free energy values confirm the chemical nature of the adsorption. Energy dispersive X-ray fluorescence microscopy (EDRF) observations of the electrode surface confirmed the existence of such an adsorbed film.