• Asian Pacific Journal of Cancer Prevention
• /
• 제14권3호
• /
• pp.1571-1578
• /
• 2013

Cancer is a leading cause of death worldwide. Recently, the demand for more effective and safer therapeutic agents for the chemoprevention of human cancer has increased. As a white rot fungus, Inonotus obliquus is valued as an edible and medicinal resource. Chemical investigations have shown that I. obliquus produces a diverse range of secondary metabolites, including phenolic compounds, melanins, and lanostane-type triterpenoids. Among these are active components for antioxidant, antitumoral, and antiviral activities and for improving human immunity against infection of pathogenic microbes. Importantly, their anticancer activities have become a hot recently, but with relatively little knowledge of their modes of action. Some compounds extracted from I. obliquus arrest cancer cells in the G0/G1 phase and then induce cell apoptosis or differentiation, whereas some examples directly participate in the cell apoptosis pathway. In other cases, polysaccharides from I. obliquus can indirectly be involved in anticancer processes mainly via stimulating the immune system. Furthermore, the antioxidative ability of I. obliquus extracts can prevent generation of cancer cells. In this review, we highlight recent findings regarding mechanisms underlying the anticancer influence of I. obliquus, to provide a comprehensive landscape view of the actions of this mushroom in preventing cancer.

• 한국세라믹학회지
• /
• 제40권6호
• /
• pp.519-524
• /
• 2003

Porous carbon with high surface area and pore volume was prepared by a reverse replication process and its toluene equilibrium adsorption behavior was investigated. The preparation process of the porous carbon was composed of fellowing sub-processes in series: synthesis and template preparation of silica gel, impregnation and polymerization of DVB monomer in silica template, carbonization of DVB polymer in a silica-polymer composite, and HF-assisted selective etching of silica in carbon-silica composite. The prepared porous carbon was nano porous and had ultrahigh specific surface area (2007 ㎡/g) and large pore volume (3.07 ㎤/g). The nanoporous carbon showed rapid toluene adsorption rate and good toluene adsorption capacity, compared with a commercial Y-type zeolite. In the present study, a reverse replication process to prepare nanoporous carbons will be introduced and its application potential as a gas adsorbent will be discussed.

• 열처리공학회지
• /
• 제31권2호
• /
• pp.63-67
• /
• 2018

Recent mold industry uses many roll-to-roll processes that can produce high production speed and precision machining and automation process. In the circular cylinder mold, however, patterns of less than $10{\mu}m$ are difficult to manufacture and maintain. In this study, we fabricated a circular cylindrical mold with a DLC thin film which have high hardness, low coefficient of friction and high releasability by using lithography and lift-off process. The height, line width, and pitch of the fabricated DLC macro pattern are $3.1{\mu}m$, $9.1{\mu}m$ and $20.2{\mu}m$, respectively. The pattern size is finer than the current applied to the aluminum cylinder type, and this shows the possibility of practical use of DLC micro pattern roll mold.

• Geomechanics and Engineering
• /
• 제21권4호
• /
• pp.337-348
• /
• 2020

Tropical organic soils having more than 65% of organic matters are named "peat". This soil type is extremely soft, unconsolidated, and possesses low shear strength and stiffness. Different conventional and industrial binders (e.g., lime or Portland cement) are used widely for stabilisation of organic soils. However, due to many factors affecting the behaviour of these soils (e.g., high moisture content, fewer mineral particles, and acidic media), the efficiency of the conventional binders is low and/or cost-intensive. This research investigates the impact of different constituents of cement-sodium silicate grout system on the compressibility behaviour of organic soil, including settlement and void ratio. A microstructure analysis is also carried out on treated organic soil using Scanning Electron Micrographs (SEM), Energy Dispersive X-ray spectrometer (EDX), and X-ray Diffraction (XRD). The results indicate that the settlement and void ratio of treated organic soils decrease gradually with the increase of cement and kaolinite contents, as well as sodium silicate until an optimum value of 2.5% of the wet soil weight. The microstructure analysis also demonstrates that with the increase of cement, kaolinite and sodium silicate, the void ratio and porosity of treated soil particles decrease, leading to an increase in the soil density by the hydration, pozzolanic, and polymerisation processes. This research contributes an extra useful knowledge to the stabilisation of organic soils and upgrading such problematic soils closer to the non-problematic soils for geotechnical applications such as deep mixing.

• 한국응용과학기술학회지
• /
• 제41권2호
• /
• pp.520-529
• /
• 2024

Lycium barbarum extract has a high potential to be developed as a health functional food due to the various health-promoting effects of Lycium barbarum. This study analyzed changes in nutritional and functional components depending on the extraction solvent (purified water and a mixture of purified water and alcohol) and the condition of the sample. The nutritional components (carbohydrates, protein, fat, ash), organic acids, amino acids, total phenolic compounds, and total flavonoids of the extract produced during the extraction process were analyzed. The nutritional composition and functional substances of the extracts showed some differences depending on the type of solvent and the condition of the sample. The amounts of crude protein (7.61%), crude fat (1.63%), carbohydrate (90.22%), and ash (0.54%) of dried Lycium barbarum extract using purified water as a solvent were similar to those of the powder sample extract. The highest content of citric acid was 4.31 mg/mL, similar to the case of acetic acid, when the powder sample used a mixture of purified water and alcohol as a solvent. The highest amino acid content was 357.39 mg/mL when the powder sample was mixed with purified water and alcohol as a solvent. The total amount of phenolic compounds was 686.16 g/L when the powder sample was extracted with a mixture of purified water and alcohol as a solvent. The highest total flavonoid content was 111.32 g/L when the powder sample was extracted with a mixture of purified water and alcohol as a solvent.

• 한국식품위생안전성학회지
• /
• 제28권1호
• /
• pp.7-12
• /
• 2013

본 연구에서는 멸균처리공정이 없는 돈육 포장공정을 대상으로 작업장에서 직접 분리한 야생균주인 Salmonella spp. KSC101를 작업장의 온도와 시간을 주요 변수로 하여, 이들 현장에서의 Salmonella spp. KSC101의 성장 특성을 파악하고, 이를 수학적으로 예측할 수 있는 모델을 개발하였다. 돈육포장공장 현장을 반영하여 온도는 0, 5, 10, 15, $20^{\circ}C$로, 시간은 0, 1, 2, 3시간으로 하였으며, $0^{\circ}C$와 $5^{\circ}C$에서는 성장이 발생하지 않았으며, $10^{\circ}C$, $15^{\circ}C$, $20^{\circ}C$에 는 약간의 성장이 있었으나 증가수준은 평균 0.34 log CFU/g정도였고, $20^{\circ}C$에서 성장율이 더 높았으나 $15^{\circ}C$와는 통계적으로는 유의하지 않았다(p < 0.05). 하지만 PMP와 비교시 야생균주인 Salmonella spp. KSC101의 성장이 더 빠른 것으로 나타났다. 이들 실험결과를 바탕으로 1차 모델은 Gompertz 4 parameter식을, 2차 모델은 Exponential decay식을 이용하여 성장예측모델을 개발하였으며, $R^2$값은 0.99이상으로 나타났다. 개발된 모델에 대한 검증으로 RMSE를 이용하였으며, 값이 0.103으로 양(+)의 방향으로 약간 초과 예측하는 것으로 나타났으나, 최종적으로 실험값과 예측값이 ${\pm}0.5$ log cfu/g 내에서 일치하고 있어, 본 연구에서 개발된 모델은 추후 냉장돈육 포장공정에서 위생관리기준 설정에 대한 과학적 근거자료로 활용할 수 있을 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.304-309
• /
• 1991

We introduce the trend, of several countries, to the gas insulated transformer recently coming into the spot light by the advantages of less weight, GIS-lization, low noise level and easiness to decrease environmental pollutions, and the insulating gases. the cooling media and the insulating materials used for transformer. Hereinafter, additively the design of proto type $SF_6$ gas insulated transformer (insulation, cooling), which was developed by us(HICO) from 1987. 2 through 1990. 3, the manufacturing processes(leak protection, pressure, drying of main body), the accessories, the protective system, the cooling system, the method and the results of test and the evaluation of economics compared with conventional oil-filled transformer are represented.

• 한국지구과학회지
• /
• 제36권5호
• /
• pp.447-459
• /
• 2015

Dok island comprises Pliocene volcanic products such as a series of volcanoclastic rocks and lavas ranging in composition from alkali basalts, and trachyandesites to trachytes. Compositional variation of the basaltic rocks can be attributed to fractional crystallization of olivine, clinopyroxene, plagioclase, and magnetite. Chemical variations among the trachyandesites are caused by fractionation of clinopyroxene, plagioclase, and magnetite with minor amphibole, while trachytes are controlled mainly by feldspar fractionation. Incompatible element abundance ratios and chondrite normalized LREE/HREE ratios (e.g., (La/Yb)c: 24.8 to 32.8 for basalts, 15.6 to 31.2 for trachyandesites) suggest that the origins of the basalts and trachyandesites involve both different degrees of partial melting and subsequent fractional crystallization processes. Trace element ratios of the basalts from Dok island are characterized by high Ba/Nb, La/Nb, Ba/Th and Th/U and isotopic ratios (Tasumoto and Nakamura, 1991) that are similar to the EM 1 type of oceanic island basalts such as Gough and Tristan da Cunha basalts.

• Journal of Welding and Joining
• /
• 제8권3호
• /
• pp.53-59
• /
• 1990

Temperature distribution of thick plate during welding was investigated. Applied weldng process was shielded metal arc welding which was known as one of the most utilized processes in fabrication fields. Heating and cooling cycles were recorded by imploying high fidelity recorded and K-type thermocouple of 0.3mm in diameter. Both analytical and numerical calculations were preformed so as to verify the thermal cycle measurement. Results showed that the temperature of a welded points at given time could be predicted by the theoretical calculations. It was considered that methods could be applied to real structural components with slight modification.

• 한국인쇄학회지
• /
• 제11권1호
• /
• pp.103-122
• /
• 1993

A cause and counterplan of the increase in dark decay rate of$\varepsilon$-CuPc/PVCz photoreceptor which is consist of the carrier generation layer (CGL) of$\varepsilon$type copper phthalocyanine ($\varepsilon$-CuPc) thin film by an aqueous coating method and the carrier transport layer (CTL) of polyvinylcarbazol (PVCz) by spin coating, are studied in this paper. Electrochemical deposition of CGL was accompanied by an increase in work function of the aluminium substrate during the processes and the enhanced work function 5.3 eV rose above the ionization potential 5.16 eV of $\varepsilon$-CuPc. This resulted in the increased injection of holes from substrate into CGL and a fast dark decay rate. Improved photoreceptor, an electron-transport $\varepsilon$-CuPc/TNF photoreceptor, led to lowing of dark decay rate and increasing of photosensitivity. The carrier generation efficiency (ηg), carrier injection efficiency (ηi) and xerographic gain (G) of the $\varepsilon$-CuPc/TNF photoreceptor were obtained by XTOF method and PIDC.