• 대한치과보철학회지
• /
• 제9권1호
• /
• pp.9-15
• /
• 1969

The purpose of this study was to examine arch form, occlusion in centric occlusion. Male 561 case, Female 305 case were impressioned with alginate impression material, and plaster models were made. Occlusion and maxillary dental arch were studied on plaster models in Korean adults aged from 18 to 60 Years. The results were as follows. 1. The upper dental arch was U-type(57.77%), O-type(23.52%), V-type(18.71%) in male, and U-type(60.66%), O-type(27.11%), V-type(12.13%) in female. 2. The commonest type of the anterior bite was 1-form($68.09{\pm}1.97%$) in male, ($72.46{\pm}2.56%$) in female, and posterior bite was 1-form($65.06{\pm}2.01%$) in male, ($69.51{\pm}2.64%$ in female. 3. In the maxillary dental arch U-type was frequented and the relationship of occlusion in upper and lower dental arch was mainly 1-form.

• 한국지능시스템학회논문지
• /
• 제12권4호
• /
• pp.341-346
• /
• 2002

주어진 값에 존재하는 불확실성을 표현하기 위하여 타입-1 퍼지값을 사용하듯이, 타입-1 퍼지값의 소속함수를 명확히 정의하기 어려운 경우에 타입-2 퍼지값을 사용할 수 있다. 타입-2 퍼지값은 타입-1 퍼지값에 비해 표현범위가 넓다는 장점이 있지만 타입-2 퍼지값의 사용을 위해서는 기존에 타입-1 퍼지값에서 정의되었던 연산들에 대한 확장된 재정의가 필요하다. 본 논문에서는 타입-2 퍼지값에 대한 비교 및 순위결정에 대한 방법을 제안하였다. 제안된 방법은 타입-2 퍼지값의 실제값과 그 실제값에 대한 가능성을 고려하여 비교결과를 산출하는 만족함수에 기반하고 있으며, 각각의 비교 및 순위결정 결과에 대한 가능성 혹은 신뢰도를 계산한다. 본 논문에서는 제안된 방법이 갖는 몇몇 특성에 대하여도 분석하였다.

• Journal of Microbiology and Biotechnology
• /
• 제10권5호
• /
• pp.620-627
• /
• 2000

To determine the prevalence of genetic polymorphisms in Epstein-Barr virus (EBV) strains in the Korean population, the restriction site polymorphisms for BamHI and XhoI enzymes were analyzed with 16 EBV isolates from cancer patients and 7 EBV isolates from healthy carriers, using polymerase chain reaction techniques. None of the 23 isolates were found to carry an extra BamHI site in the BamHI F-fragment (f-variant). Of the 12 type-1 isolates from the cancer patients, 10 lost both the LMP1 XhoI site and the BamHI site between the BamHi W1* and I1* fragments (a W1*I1* fusion variant or type C). The latter W1*I1* fusion variant was due to a mutation of thymidine to adenine, as evidenced by a sequence analysis. The remaining two type-1 isolates showed either no variation at both sites or the loss of only the XhoI site. In contrast, two type-2 isolates and two intertypic recombinants with a type-1 allele at the EBNA2 locus and type-2 alleles at all or some of the EBNA3 loci retained both enzyme sites. In similar analyses of the 7 isolates from the healthy carriers, five of six type-1 isolates lost these two sites, however, one type-2 isolate did not. These results clearly indicate a strong association of both the LMP1 XhoI site loss and the W1*I1* fusion variant with the type-1 rather than the type-2 EBV strains circulating in the immunocompetent Korean carriers.

• 한국의류학회지
• /
• 제27권6호
• /
• pp.624-634
• /
• 2003

The purpose of this study was to classify body types of elderly male aged between 60 and 80. 40 direct items and 22 indexes were measured. The result were as follows. First. through the factor analysis of indexes, 8 factors were extracted upon factor scores, 4 clusters represented characteristics of elderly male's body type. Type 1 indicates flat and bend-forward type. Type 2 indicates fat and bend-forward type. Type 3 indicates lean-back type and is a little bit fat and the waist is round. Type 4 indicates a straight type in which the chest and the hip are developed. Second, drop was needed to discriminate elderly male's body type. 3 types of drop were extracted. The body type with big drop is Y type in which the drop distance is between 14 and 22cm. The body type with standard drop is A type in which the drop distance is between 6 and 14cm. The body type with small drop is B type in which the drop distance is between -4 and 6cm. Third, when the types of appearance rate were combined, 7 body types of elderly male showed high appearance rate; A1, B1, A2, B2, A3, A4, B4. According to the above result, flat and bended-forward type with drop A was dominant body type of elderly male.

• Journal of Periodontal and Implant Science
• /
• 제24권1호
• /
• pp.1-14
• /
• 1994

Dental calculus which is calcifing and/or calcified dental plaque is divided into supragingival calculus and subgingival calculus according to the position of deposit to gingival margin. Subgingival calculus has more important clinical significance in diagnosis and treatment of periodontal disease than supragingival calculus. In order to investigate the deposition pattern of subgingival calculus on each root surface of different tooth type, extracted 192 teeth due to excessive destruction of periodontal tissue were divided according to tooth type and the deposition pattern of subgingival calculus was classified into linear type, veneer type, scattered type, and aggregated type according to the configuration and the extent of deposit. The difference of percentage between each deposition pattern was statistically analyzed by Chi-Square test. Following results were obtained : l. In maxillary incisors, linear type and aggregated type were predominant deposition pattern of subgingival calculus on labial(45.5%, 36.4%) and palatal(36.4%, 36.4%) root surface, aggreated type(72.7%) was on mesial surface, and aggregated type(54.5%) and scattered type(36.4%) was on distal suface. 2. In mandibular incisors, scattered type, linear type and aggregated type were predominant deposition pattern of subgingival calculus on labial(33.3%, 30.6%, 27.8%) and lingual(36.1%, 30.6%, 25.0%) root surface, aggregated type(33.3%), scattered type(27.8% ), and veneer type(27.8%) were on mesial surface, and aggregated type(38.9%) and scattered type(33.3%) on distal surface. 3. In maxillary peremolars, the predominant deposition patterns of subgingival calculus were linear type(28.6%) on buccal root suface, scattered type(35.7%) and linear type(28.6%) on palatal surface, scattered type(39.3%) on mesial surface, aggregated type(46.4%) on distal surface, and aggregated type(53.6%) on furcation area. 4. In mandibular premolars, scattered type was predominant deposition pattern of subgingival calculus on buccal(39.3%) and lingual(50.0%) root surface, scattered type(32.1%) and aggregated type(32.1% ) were on mesial surface, and aggregated type(42.9%) was on distal surface. 5. In maxillary molars, aggregated type(40.0%) and scattered type(32.5%) were predominat deposition pattern of subgingival calculus on buccal root surface, aggregated type was on distal(40.0%) and furcation area(50.0%), but there was no predominat pattern on palatal and mesial root surfaces. 6. In mandibular molars, aggregated type(39.5%) and scattered type(28.9%) were predominant deposition patterns of subgingival calculus on buccal root surface, aggregated type(36.8%) was on lingual surface, linear type(39.5%) and aggregated type(34.2%) were on furcation area, but there was no predominant pattern on mesial and distal root surfaces.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 추계 학술대회 학술발표 논문집
• /
• pp.76-79
• /
• 2003

퍼지 로직 시스템(FLS)은 다양한 분야에서 성공적으로 사용되고 있다 퍼지 로직 시스템의 멤버십 함수와 규칙은 언어적인 정보나 수치적 데이터를 사용하여 표현된다. 또한 이러한 정보나 데이터에는 불확실성과 노이즈 등이 존재한다. 그러나 단순한 퍼지 로직 시스템으로노이즈가 포함된 불확실한 정보를 효과적으로 다루고 표현하는 데는 한계가 있다. 그러므로 노이즈가 포함된 정보를 효율적으로 처리하기 위해 본 논문에서는 type-2 FLS를 이용한다. 노이즈가 포함되어 불확실한 정도를 정확한 값으로 표현하기 어려울 때, type-2 FLS은 보다 정확하게 정보들을 다를 수 있음을 보인다. 비선형 시계열 시스템인 Box-Jenkins 데이터를 이용하여 singleton Type-1 FLS과 non-singleton type-1 FLS의 결과 값을 확인하고 이의 성능을 type-2 FLS과 비교, 분석한다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권1호
• /
• pp.1-8
• /
• 2013

Surface permanent magnet-type vernier motors with three magnet array-type rotors (parallel magnetized type, repulsion type, and Halbach type) are compared based on the pull-out torque. It was clarified that increasing the rotor radius increases the pull-out torque at a fixed three-phase alternating voltage. The mechanism for the pull-out torque increase on each magnet array type was different, when the effects of the increase were analyzed based on an induced electromotive force and a synchronous reactance. As a result, the design of the Halbach-type rotor was found to be especially effective for achieving high pull-out torque, because this array type achieves a large induced electromotive force $E_0$ and a small synchronous reactance $x_s$.

• 대한족부족관절학회지
• /
• 제12권1호
• /
• pp.80-85
• /
• 2008

Purpose: To evaluate and compare the outcome between interlocking IM nailing and LCP fixation in the treatment of distal metaphyseal tibial fracture. Materials and Methods: From January 2000 to December 2007, 17 patient were treated by interlocking IM nail and 13 patient were treated by LCP fixation for distal metaphyseal tibial fracture. Results: According to AO classification, there were 2 type A1 fracture (12%), 6 type A2 fracture (36%), 3 type A3 fracture (18%), 4 type B1 fracture (24%), 1 type B3 fracture (6%), 1 type C1 fracture (6%) in interlocking IM nailing group and 1 type A2 fracture (7.7%), 2 type A3 fracture (15.4%), 3 type B1 fracture (23%), 3 type B2 fracture (23%), 3 type C1 fracture (23%), 1 type C2 fracture (7.7%) in LCP fixation group. The clinical functional outcome (according to AOFAS score) is 75.6 point in IM nailing group and 81.5 point in LCP fixation group. In IM nailing group, 65% of patient showed satisfactory result and In LCP fixation group, 77% of patient showed satisfactory result. Conclusion: There is no difference on clinical results between IM nailing and MIPPO (minimal invasive percutaneous plate osteosynthesis) group in the treatment of distal tibia fracture. But MIPPO group have higher subjective satisfactory score and less complication rate. The weakness of our study is a small case number and limited follow-up and we believe a better designed prospective study will be needed.

• 한국작물학회지
• /
• 제30권3호
• /
• pp.217-222
• /
• 1985

초형이 다른 3종의 수도 Isogenic line(Open-Spread- 및 Broom-type)을 5수준의 이앙밀도(47.62, 22.22, 15.15, 15.11 및 8.33주/$m^2$)와 4수준의 시비조건(증비, 보비, 감비 및 무비)에 공시하여 얻은 수량자료를 Multiple regression polynomial 수식으로 고정하고 편미분하여 밀도와 시비및 밀도$\times$시비의 작용력을 해석하였다. 그 결과는 다음과 갈다. 1. 소식조건하에서의 밀도변동에 따른 수량 반응은 Broom-type이 가장 높고 예민하였다(도 1). 2. 이앙밀도의 작용력〔$\delta$f(D, F)/$\delta$D〕은 Open-, 및 Spread-type이 다비에서 높아지는 대신에Broom-type은 시비와 관계없이 소식 및 밀식에서 높은 경향이었다.(도 2). 3. 시비율의 작용력 〔$\delta$f(D, F)/$\delta$D〕은 0~1000kg/10a 범위로서 Open- 및 Spread-type에서는 밀식조건하에서 높았으나 Broom-type에서는 소식조건하에서 소비 및 다비의 작용력이 큰 경향이었다(도 3). 4. Broom-type의 소식조건하에서 밀도$\times$시비의 상호작용력 〔$\delta$$^2$F(D, F)/$\delta$D$\delta$F〕은 음성을 나타내었고, Open- 및 Spread-type은 표준 및 밀식과 증비 조건에서 양성을 나타내었다(도 4). 5. $m^2$당 11~14주의 소식조건하에서 추정되는 소요시비수준은 Open-type 이 1.3~1.5배비인 반면에 Broom-type은 1.5배비 이상의 수준인 것으로 판단되었다. 6. 소식에 의한 이앙노동의 생력화를 위해서는 다비수용이 가능한 Broom-type의 연구가 필요할 것으로 해석이 된다.

• 대한치과보철학회지
• /
• 제14권1호
• /
• pp.35-40
• /
• 1976

The author observed the positional relationship of maxillary cuspid to ala-lacrimal duct line in the 594 Koreans(329 male, 265 female) who had relatively normal teeth arrangement, aged 16 to 70. The relationship of ala-lacrimal duct line to the distal angie of maxilly cuspid of the subjects were classified as follows; Type A : Ala-lacrimal duct line was lotated more medially than the distal angle of maxillary cuspid. Type B : Ala-lacrimal duct line coincided with the distal angle of maxillary cuspid. Type C: Ala-lacrimal duct line was located more distally than the distal angle of maxillary cuspid. The occlusal relationship of the maxillary first molar to the mandibular first molar of the subjects were classified as follows; Group I : Group of neutrocclusion relationship. Group II : Group of distocclusion relationship. Group III : Group of mesiocclusion relationship. The obtained results were as follows; 1) The positional relationship of maxillary cuspid to ala-lacrimal duct line were as follows; (Male) Type A: $68.5%{\pm}1.58m%$, Type B: $22.5%{\pm}2.30m%$, Type C: $9.1%{\pm}\1.58m%$ (Female) Type A : $64.5%{\pm}2.94m%$, Type B: $26.5%{\pm}2.71m%$, TypeC: $8.9%{\pm}1.73m%$ 2) Ala-lacrimal duct line located more distally in group II and group III than group I at the point of the positional relationship of upper and lower first molar. 3) Average distance and standard deviation in type A were as follows; (Male) Right: $2.17mm.{\pm}1.01mm.$ Left: $2.27mm.{\pm}1.02mm.$ (Female) Right: $2.06mm.{\pm}0.70mm.$ Left: $2.24mm.{\pm}0.80mm.$ 4) Average distance and standard deviation in type C were as follows; (Male), Right: $1.47mm.{\pm}0.85mm.$ Left: $1.52mm.{\pm}0.97mm.$ (Female) Right: $1.04mm.{\pm}0.44mm.$ Left: $1.26mm.{\pm}0.89mm.$ The results of 3) and 4) had no significant difference between the male and female.