• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.432-435
• /
• 2000

This paper present a new sort of multilayer piezoelectric ceramic transformer for the application to AC-adapters. This piezoelectric transformers operate in the second and third length extensional vibration mode. And the output performance of two types of piezoelectric transformers are compared by ANSYS, which is one of the FEM analysis program. As a result the minimum displacement was occurred at the two points in second length extensional vibration mode and three point in third length extensional vibration mode. One is the middle of input and the other is middle of output parts. And output voltage was inversely decreased by increasing number of output layers. Also The third mode type is shown higher power transition ratio than the second mode type.

• 한국전자파학회논문지
• /
• 제29권10호
• /
• pp.817-820
• /
• 2018

본 논문에서는 스마트 안경에서 사용가능한 2.4 GHz 무선 근거리 통신망(WLAN) 대역용 소형 다중 입력 다중 출력(MIMO) 안테나 설계 및 구현에 대한 제안을 하였다. MIMO 안테나 시스템을 소형화하기 위해서, 안테나의 그라운드면을 방사체로서 사용하였으며, T 자형의 접지면을 제안하고 있다. 광대역 격리를 특성을 확보하기 위해, 이중 공진이 그라운드 모드에서 형성되도록 한다. 하나의 공진은 T 자형 접지에 의해 생성되고, 두 번째 공진은 두 개의 급전선 사이에 슬롯과 커패시터를 추가하여 만들어진다. 구현된 안테나의 측정 결과, 반사 계수 특성은 -5.1 dB보다 작지만, 얻는 격리 특성은 -20 dB 미만이다. 다이버시티 성능은 측정된 2차원 방사 패턴을 사용하여 평가하였고, 목표 대역(2.4~2.5 GHz)에서 측정된 ECC(envelope correlation coefficients) 값은 0.1 미만이다.

• 한국광학회지
• /
• 제23권5호
• /
• pp.211-216
• /
• 2012

본 논문은 분광 영역 모드록킹(Fourier domain mode-locking: FDML) 레이저를 기반으로 공진형 광섬유 격자 센서를 구현한 결과를 보고한다. FDML 레이저는 파브리-페롯 가변 필터를 이용하여 링 형태로 구성하며, 레이저 공진기 안에 광섬유 격자 2개를 한 쌍으로 하여 센서부 2개를 삽입한 구조이다. 광섬유 격자는 반사 거울 역할을 하며, 광섬유 격자의 위치에 따라 독립된 FDML 레이저 공진기를 구성한다. 각각 센서부의 공진 주파수는 46.687 kHz 와 44.340 kHz이다. FBG 센서 시스템에 정적 및 동적 스트레인을 가하였으며, 정적 스트레인에 대해 파장 영역과 시간 영역에서 측정된 스트레인에 대한 변화율은 각각 $0.61pm/{\mu}{\epsilon}$, $0.8ns/{\mu}{\epsilon}$ 이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2467-2469
• /
• 2001

A strategy for the swing-up and stabilization control method for a two-links rotational pendulum according to states of each link of the rotational pendulum is proposed. The proposed controller consists of two modes of control such as divergence mode and stabilization mode. When the controller is in divergence mode, control input is generated using sinusoidal function, which is developed based on resonance period of the pendulum in linear region, to make the second link (pendulum) reach top position. After the controller finishes operation in divergence mode, stabilization control is initiated to keep the pendulum around the top position using pole placement control method. Experimental results are given to show the effectiveness of the proposed method.

• Current Optics and Photonics
• /
• 제4권2호
• /
• pp.134-140
• /
• 2020

A significant enhancement of the magneto-optical Faraday rotation and extraordinary optical transmission (EOT) in the cascaded double-fishnet (CDF) structure with periodic rectangular apertures is theoretically predicted by using the extended finite difference time domain (FDTD) method. The results demonstrate that the transmittance spectrum of the CDF structure has two EOT resonant peaks in a broad spectrum spanning visible to near-infrared wavebands, one of them coinciding with the enhanced Faraday rotation and large figure of merit (FOM) at the same wavelength. It is most important that the resonant position and intensity of the transmittance, Faraday rotation and FOM can be simply tailored by adjusting the incident wavelength, the thickness of the magnetic layer, and the offset between two metallic rectangular apertures, etc. Furthermore, the intrinsic physical mechanism of the resonance characteristics of the transmittance and Faraday rotation is thoroughly studied by investigating the electromagnetic field distributions at the location of resonance. It is shown that the transmittance resonance is mainly determined by different hybrid modes of surface plasmons (SPs) and plasmonic electromagnetically induced transparency (EIT) behavior, and the enhancement of Faraday rotation is mostly governed by the plasmonic electromagnetically induced absorption (EIA) behavior and the conversion of the transverse magnetic (TM) mode and transverse electric (TE) mode in the magnetic dielectric layer.

• 한국소음진동공학회논문집
• /
• 제23권1호
• /
• pp.84-91
• /
• 2013

Ultrasonic flip-chip bonding needs a precise bonding tool which delivers ultrasonic energy into chip bumps effectively to use the selected resonance mode and frequency of the horn structure. The bonding tool is excited at the resonance frequency and the input and output ports should locate at the anti-nodal points of the resonance mode. In this study, we propose new design method with topology optimization for ultrasonic bonding tools. The SIMP(solid isotropic material with penalization) method is used to formulate topology optimization and OC(optimal criteria) algorithm is adopted for the update scheme. MAC(modal assurance criterion) tracking is used for the target frequency and mode. We fabricate two prototypes of ultrasonic tools which are based on 3D optimization models after reviewing 2D and 3D topology optimization results. The prototypes are satisfied with the ultrasonic frequency and vibration amplitude as the ultrasonic bonding tools.

• Current Optics and Photonics
• /
• 제5권1호
• /
• pp.66-71
• /
• 2021

The resonance characteristics of H-shaped metamaterials, whose widths were varied while keeping the height constant, were investigated in the terahertz (THz) frequency range. The H-shaped metamaterials were numerically analyzed in two modes in which the polarization of the incident THz electric field was either parallel or perpendicular to the width of the H-shaped structure. The resonant frequency of the metamaterial changed stably in each mode, even if only the width of the H shape was changed. The resonant frequency of the metamaterial operating in the two modes increases without significant difference regardless of the polarization of the incident electromagnetic wave as the width of the H-shaped metamaterial increases. The electric field distribution and the surface current density induced in the metamaterial in the two modes were numerically analyzed by varying the structure ratio of the metamaterial. The numerical analysis clearly revealed the cause of the change in the resonance characteristics as the width of the H-shaped metamaterial changed. The efficacy of the numerical analysis was verified experimentally using the THz-TDS (time-domain spectroscopy) system. The experimental results are consistent with the simulations, clearly demonstrating the meaningfulness of the numerical analysis of the metamaterial. The analyzed resonance properties of the H-shaped metamaterial in the THz frequency range can be applied for designing THz-tunable metamaterials and improving the sensitivity of THz sensors.

• 한국전자파학회논문지
• /
• 제10권3호
• /
• pp.351-358
• /
• 1999

본 논문에서는 유전체가 삽입된 원통형 공진기에서 공진주파수들의 모드를 구분하는 방법에 대하여 기술한다. 공진주파수들의 모드를 구분하기 위해 먼저 빈 원통형 공진기에서 계산된 공진주파수와 EM 시뮬레이터인 Microstripes의 시뮬레이션 결과 값을 비교하였다. TE 모드는 가계를 z방향으로 여기시켰을 때, TM 모드는 자계를 ∮방향으로 여기시킨 경우와 비교하여 구분할 수 있었다. 가운데 유전체가 삽입된 원통형 공진기에 이 결과를 적용해 실험결과와 비교하여 모드를 구분하였다. 이 방법이 올바른 지를 확인하기 위해 유전체의 높이를 변화시키며 모드 추적을 하였다. TE011 모드는 공진주파수의 변화가 커서 다른 공진모드와 순서가 바뀌었으나, TE111 모드와 TE211 모드는 공진주수의 변화가 적었다.

• 한국소음진동공학회논문집
• /
• 제21권11호
• /
• pp.1029-1035
• /
• 2011

Pressure pulsation of exciting sources that generally occurs on the piping system connected to the discharge of BFP(boiler feed water pump) in power plants causes wave reflection, wave interference, resonance, standing wave and so on. But if the operating speed of the pump is changed, the state of the noise and vibration can be done because characteristics of the exciting source are changed. This paper is to investigate the cause of the noise and vibration occurring on the piping system when the operating speed of BFP is down in accordance with lowering of the power generation. It is approached to two points of view ; Firstly, it is examined whether the pulsation source impacts on the shell mode vibration that vibrates radially across the cross-section of the pipe. But it doesn't affect the shell mode as much as the resonance occurs. Secondly, to find the relation between the pulsation source and the acoustic mode of the piping system, analysis for the piping system by indirect BEM(boundary element method) is carried out. Therefore it is investigated that the mechanism of the noise and vibration relates with acoustic mode of the piping system.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.331-337
• /
• 2015

A novel fully-printed microstrip antenna with negative first resonance and dual polarization is proposed. The radiator is printed on the 1-layer substrate instead of multilayers. The -1st resonance results from a composite right- and left-handed(CRLH) structure that has a circumferentially interlocked gap capacitively coupling a patch with a shorted-ring. This compact antenna is provided with a dual-polarization capability by creating two orthogonal linear polarizations in one body with coaxial feeds. The design is carried out by doing full-wave EM field simulation which is compared with the measurement of the fabricated antenna prototype. The measured results give the gain of 5 dBi and the efficiency of 78% at the -1st resonance mode as the center frequency of a downlink channel of the bandwidth over 20 MHz with 29 dB polarization isolation for mobile communication.