• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.3
• /
• pp.264-272
• /
• 1997

This paper presents the analysis of forced resonance characteristics of electrically small dipole antenna loaded with external element and its application to measuring unknown frequencies. The method of moments with Galerkin's procedure is used to determine the current distribution of the antenna. To derive the determinantal equation of resonance lengths at a given frequency, small antennas with the reactance loaded can be treated as a two-port network. Numerical results show that the forced resonance of the electrically small dipole antenna loaded with reactance can be easily obtained by controlling the reactance for the series resonance as well as for the parallel resonance. It is demonstrated that the forced resonance characteristics can also be applied to the measurement of unknown frequencies.

• The KIPS Transactions:PartC
• /
• v.10C no.3
• /
• pp.367-376
• /
• 2003

This study deals with the DCMST (Delay constrained Capacitated Minimum Spanning Tree) problem applied in the topological design of local networks or finding several communication paths from root node. While the traditional CMST problem has only the traffic capacity constraint served by a port of root node, the DCMST problem has the additional mean delay constraint of network. The DCMST problem consists of finding a set of spanning trees to link end-nodes to the root node satisfying the traffic requirements at end-nodes and the required mean delay of network. The objective function of problem is to minimize the total link cost. This paper presents two-phased heuristic algorithm, which consists of node exchange, and node shift algorithm based on the trade-off criterions, and mean delay algorithm. Actual computational experience and performance analysis show that the proposed algorithm can produce better solution than the existing algorithm for the CMST problem to consider the mean delay constraint in terms of cost.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.12
• /
• pp.1044-1049
• /
• 2015

In this paper, isolation enhanced antenna using isolating resonator was proposed. Two loop type antennas were designed to operate at Wi-Fi band(2.4~2.5 GHz), in symmetry to the center, and are closely located to each other. In order to enhance isolation characteristics at Wi-Fi bands, isolating resonator was designed between the two loop type antennas. The proposed isolating resonator is a slot type antenna that enhances isolation with the control of the size, and by adjusting the value of capacitor($C_D$) the resonant frequency of the isolating resonator can easily be adjusted to enhance isolation characteristic at the target frequency.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.5
• /
• pp.40-48
• /
• 2023

In this paper, a sensor-based monitoring system was established to analyze the long-term behavioral characteristics of the caisson quay wall, a representative structural type in port facilities. Data was collected over a period of approximately 10 months. Based on existing literature, anomalous behaviors of port facilities were classified, and a measurement system was selected to detect them. Monitoring systems were installed on-site to periodically collect data. The collected data was transmitted and stored on a server through LTE network. Considering the site conditions, inclinometers for measuring slope and crack meters for measuring spacing and settlement were installed. They were attached to two caissons for comparison between different caissons. The correlation among measured data, temperature, and tidal level was examined. The temperature dominated the spacing and settlement data. When the temperature changed by approximately 50 degrees, the spacing changed by 10 mm, the settlement by 2 mm, and the slope by 0.1 degrees. On the other hand, there was no clear relationship with tidal level, indicating a need for more in-depth analysis in the future. Based on the characteristics of these collected database, it will be possible to develop algorithms for detecting abnormal states in gravity-type quay walls. The acquisition and analysis of long-term data enable to evaluate the safety and usability of structures in the event of disasters and emergencies.

• Journal of Navigation and Port Research
• /
• v.38 no.4
• /
• pp.385-390
• /
• 2014

Simulator is composed of several devices that have a variety of forms and functions. These devices are connected to each other by a network intricately. For this reason, simulator development and maintenance process require a lot of time and money. In order to successfully develop the simulator, it is ideal that related professionals share the work and work together in parallel. However, development is carried out inefficiently, because task interdependence makes it difficult to work in parallel. In this paper, the developments of the simulator were classified into algorithm development and system development, and it was discussed how to lower the interdependence of these two tasks and support professionals. In particular, based on the requirements analysis of the domain experts responsible for the development of the algorithm, we designed the support tool for simulator development and proposed development process using this tool. We also introduced the concept of a DataSet in order to support algorithm development of domain experts and manage data flexibly. And we designed network architecture to enable flexible reconfiguration of simulator equipment. By using the tools to support the simulator development, domain experts are able to concentrate on algorithm development and it is expected to be effective collaboration. In addition, the development plan and management are expected to be easy because the development process is systematic and clearer.

• Journal of Korea Port Economic Association
• /
• v.31 no.2
• /
• pp.69-83
• /
• 2015

This study proposes effective overseas market entry strategies that could allow Korean logistics companies to develop international capabilities and become global firms by adapting to environmental changes in global logistics. First, it reviews the overseas networks of Korean international freight forwarders and the recent trends in the global logistics market. Then, it surveys the conditions of two groups of freight forwarders, namely partnerships and subsidiaries, which are categorized according to type of entry into foreign markets. These companies' networks are concentrated in East and Southeast Asia regardless of network type. As a result, the ability for partnerships to network is higher than that of subsidiaries. However, subsidiaries are small in number and located in various regions because of their initial stage, which is why their businesses depend on the price competitiveness of the parent company. The satisfaction and performance of subsidiaries are both generally low according to the presented findings. In addition, the successful strategies of international freight forwarders include following operations, specializing their logistics services, building collaborations among small and medium-sized companies, recruiting and training professional human resources in international logistics, and entering markets together with their customers. Overall, this study highlights the importance of measuring and evaluating objectively the level and performance of overseas networking through a survey about the internationalization of Korean freight forwarder companies. To conclude, this study is considered to contribute to raising their global competitiveness by suggesting strategies derived from the survey findings and SWOT analysis.

• Journal of Navigation and Port Research
• /
• v.47 no.1
• /
• pp.1-9
• /
• 2023

Many studies have analyzed marine accidents, and since marine accident information is updated every year, it is necessary to periodically analyze and identify the causes. The purpose of this study was to prevent accidents by identifying and analyzing the causes of marine accidents using previous and new data. In marine accident data, 1,921 decisions by the Korea Maritime Safety Tribunal on marine accidents on fishing ships over 16 years were collected in consideration of the specificity of fishing ships, and 1,917 cases of accident notification text history by the Ministry of Maritime Affairs and Fisheries over 3 years were collected. The decision data and text data were classified according to variables and quantified. Prior probability was calculated using a Bayesian network using the quantified data, and fishing ship marine accidents were predicted using backward propagation. Among the two collected datasets, the decision data did not provide the types of fishing ships and fishing areas, and because not all fishing ship accidents were included in the decision data, the text data were selected. The probability of a fishing ship marine accident in which engine damage would occur in the West Sea was 0.0000031%, as calculated by backward propagation. The expected effect of this study is that it is possible to analyze marine accidents suitable for the characteristics of actual fishing ships using new accident notification text data to analyze fishing ship marine accidents. In the future, we plan to conduct research on the causal relationship between variables that affect fishing ship marine accidents.

• Journal of Korea Port Economic Association
• /
• v.34 no.4
• /
• pp.17-38
• /
• 2018

The purpose of this study is to establish shipping companies' selection factors related to a classification society and to explore the relative importance of each factor using the analytical hierarchy process(AHP) technique. Insufficient research exists on the hierarchial structure of shipping companies' factors of selecting a classification society. The factors are identified and classified into two tiers of major and detailed factors, by referring to the related industrial linkages, prior research related to the determinants, and the process and service delivery of the classification society's activities. The empirical analysis of this study is based on the relative importance of determinants when selecting a classification society, and experts engaged with shipping companies were surveyed using questionnaires. The results of the AHP methodology on the main factors of shipping companies in selecting a classification society are as follows. The relative importance of the main factors was 0.373 for technical and survey services, 0.284 for recognized organizations(RO) functions, 0.177 for cost and 0.167 for market(related industry) expectations. The relative importance of the detailed factors is 0.144 for the ability to respond to a port state control(PSC) inspection, 0.143 for technical services, 0.090 for the requirements of financial institutions/ shippers/shipyards, 0.087 for class maintenance costs, 0.086 for the survey network, 0.085 for surveyor competency, 0.072 for cooperation with IMO and government authorities, 0.067 for recognition for RO, 0.058 for the business power of the classification society, 0.052 for the initial inspection costs, 0.040 for reputation and trustworthiness, 0.038 for the costs related to the class, and 0.037 for connections to related industries.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.235-240
• /
• 2006

The paper will give an overview of the mission of GalTeC and then concentrate on two main aspects. The first more detailed aspect, is the analysis of the key performance parameters for the Galileo system services and presenting a technical overview of methods and algorithms used. The second more detailed aspect, is the service volume prediction including service dimensioning using the Prediction tool. In order to monitor and validate the Galileo SIS performance for Open Service (OS) and Safety Of Life services (SOL) regarding the key performance parameters, different analyses in the SIS domain and User domain are considered. In the SIS domain, the validation of Signal-in-Space Accuracy SISA and Signal-in-Space Monitoring Accuracy SISMA is performed. For this purpose first of all an independent OD&TS and Integrity determination and processing software is developed to generate the key reference performance parameters named as SISRE (Signal In Space Reference Errors) and related over-bounding statistical information SISRA (Signal In Space Reference Accuracy) based on raw measurements from independent sites (e.g. IGS), Galileo Ground Sensor Stations (GSS) or an own regional monitoring network. Secondly, the differences of orbits and satellite clock corrections between Galileo broadcast ephemeris and the precise reference ephemeris generated by GalTeC will also be compared to check the SIS accuracy. Thirdly, in the user domain, SIS based navigation solution PVT on reference sites using Galileo broadcast ephemeris and the precise ephemeris generated by GalTeC are also used to check key performance parameters. In order to demonstrate the GalTeC performance and the methods mentioned above, the paper presents an initial test result using GPS raw data and GPS broadcast ephemeris. In the tests, some Galileo typical performance parameters are used for GPS system. For example, the maximum URA for one day for one GPS satellite from GPS broadcast ephemeris is used as substitution of SISA to check GPS ephemeris accuracy. Using GalTeC OD&TS and GPS raw data from IGS reference sites, a 10 cm-level of precise orbit determination can be reached. Based on these precise GPS orbits from GalTeC, monitoring and validation of GPS performance can be achieved with a high confidence level. It can be concluded that one of the GalTeC missions is to provide the capability to assess Galileo and general GNSS performance and prediction methods based on a regional and global monitoring networks. Some capability, of which first results are shown in the paper, will be demonstrated further during the planned Galileo IOV phase, the Full Galileo constellation phase and for the different services particularly the Open Services and the Safety Of Life services based on the Galileo Integrity concept.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.3B
• /
• pp.339-348
• /
• 2004

Packet classification is an important factor to support various services such as QoS guarantee and VPN for users in Internet. Packet classification is a searching process for best matching rule on rule tables by employing multi-field such as source address, protocol, and port number as well as destination address in If header. In this paper, we propose hardware based packet classification algorithm by employing tree bitmap of multi-bit trio. We divided prefixes of searching fields and rule into multi-bit stride, and perform a rule searching with multi-bit of fixed size. The proposed scheme can reduce the access times taking for rule search by employing indexing key in a fixed size of upper bits of rule prefixes. We also employ a marker prefixes in order to remove backtracking during searching a rule. In this paper, we generate two dimensional random rule set of source address and destination address using routing tables provided by IPMA Project, and compare its memory usages and performance.