• 제목/요약/키워드: Two-layer Flow

검색결과 737건 처리시간 0.025초

Experimental and numerical investigation of closure time during artificial ground freezing with vertical flow

  • Jin, Hyunwoo;Go, Gyu-Hyun;Ryu, Byung Hyun;Lee, Jangguen
    • Geomechanics and Engineering
    • /
    • 제27권5호
    • /
    • pp.433-445
    • /
    • 2021
  • Artificial ground freezing (AGF) is a commonly used geotechnical support technique that can be applied in any soil type and has low environmental impact. Experimental and numerical investigations have been conducted to optimize AGF for application in diverse scenarios. Precise simulation of groundwater flow is crucial to improving the reliability these investigations' results. Previous experimental research has mostly considered horizontal seepage flow, which does not allow accurate calculation of the groundwater flow velocity due to spatial variation of the piezometric head. This study adopted vertical seepage flow-which can maintain a constant cross-sectional area-to eliminate the limitations of using horizontal seepage flow. The closure time is a measure of the time taken for an impermeable layer to begin to form, this being the time for a frozen soil-ice wall to start forming adjacent to the freeze pipes; this is of great importance to applied AGF. This study reports verification of the reliability of our experimental apparatus and measurement system using only water, because temperature data could be measured while freezing was observed visually. Subsequent experimental AFG tests with saturated sandy soil were also performed. From the experimental results, a method of estimating closure time is proposed using the inflection point in the thermal conductivity difference between pore water and pore ice. It is expected that this estimation method will be highly applicable in the field. A further parametric study assessed factors influencing the closure time using a two-dimensional coupled thermo-hydraulic numerical analysis model that can simulate the AGF of saturated sandy soil considering groundwater flow. It shows that the closure time is affected by factors such as hydraulic gradient, unfrozen permeability, particle thermal conductivity, and freezing temperature. Among these factors, changes in the unfrozen permeability and particle thermal conductivity have less effect on the formation of frozen soil-ice walls when the freezing temperature is sufficiently low.

지하철 목업차량내 객실 공기정화장치의 미세먼지(PM10) 및 $CO_2$ 저감성능평가 (Removal Efficiency of PM10 & $CO_2$ in Subway Mock-up Cabin)

  • 권순박;박덕신;조영민;김종범;조관현;남궁석;이주열;김태성
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2011년도 춘계학술대회 논문집
    • /
    • pp.613-618
    • /
    • 2011
  • More than 7 million persons use Seoul Metropolitan Subways (SMS) everyday and the number has been in increasing trend. With the increasing trend of concerns on indoor air quality(IAQ), the management of IAQ has become an important issue, especially in case of subway operators, because most of subway lines are placed underground with poor ventilation condition. The ultimate object of study develop independent cleaning device that reduce efficient fine particle and $CO_2$. Urban subway has characteristics about proper clean air flow, must be installed in narrow space and maintenance cycle has enough time. Two layered electrically pre-charged filters were used for removing particulate matters and gas absorbers are packed between two layer filters for removing gases pollutants such $CO_2$, VOCs and HCHO. Urban subway has characteristics about proper clean air flow, must be installed in narrow space and maintenance cycle has enough time. SCAP prototype is producted as all in one method which decrease fine dust, $CO_2$ and noxious gas. and basic test carry out with quantity of wind, a gap of pressure, sampling efficiency.

  • PDF

2次元 表面 溫排水 의 擴散 (I) (Diffusion of Two-Dimensional Surface Discharge of Heated Water in a Recangular Reservoir(l))

  • 이상준;정명균
    • 대한기계학회논문집
    • /
    • 제8권6호
    • /
    • pp.536-543
    • /
    • 1984
  • 본 연구에서는 유동 조건을 표시하는 무차원 수로 널리 이용되고 있는 Richa- rdson수(R$_{i}$)를 변수로 하여 R$_{i}$의 변화에 따른 온도 분포, 표면 유동 속도와 확산율 등을 연구하였다. 아울러 이러한 열 구배에 의한 성층화 유동(stratifield flow)에서 R$_{i}$가 유동 특성과 어떤 상관 관계를 가지는 가를 알아보기 위하여 같 은 R$_{i}$값을 갖는 다른 조건들의 실험을 수행하였다. 비슷한 R$_{i}$값에서의 온 도 분포를 비교 분석함으로써 아직까지 정립되고 있지 않는 열오염 현상 해석에서의 지배 변수로서의 R$_{i}$의 위치를 확인하고, 부력 효과에 의한 흐름의 난류 구조가 어떻게 영향 받는가 하는 문제에도 관심을 두었다.제에도 관심을 두었다.

급수가열기 동체 감육 현상 규명을 위한 유동해석 연구 (A Study on the Fluid Mixing Analysis for Proving Shell Wall Thinning of a Feedwater Heater)

  • 신민호;황경모;김경훈
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2004년도 춘계학술대회
    • /
    • pp.2017-2022
    • /
    • 2004
  • There are multistage preheaters in the power generation plan to improve the thermal efficiency of the plant and to prevent the components from the thermal shock. The energy source of these heaters comes from the extracted two phase fluid of working system. These two-phase fluid can cause the so-called Flow Accelerated Corrosion(FAC) in the extracting piping and the bubble plate of the heater for example, in case of point Beach Nuclear Power Plant and in the Wolsung Nuclear Power Plant. The FAC is due to the mass transport of the thin oxide layer by the convection. FAC is dependent on many parameters such as the operation temperature, void fraction, the fluid velocity and pH of fluid and so on. Therefore, in this paper velocity was calculated by FLUENT code in order to find out the root cause of the wall thinning of the feedwater heaters. It also includeed in the fluid mixing analysis model are around the number 5A feedwater heater shell including the extraction pipeline. To identify the relation between the local velocities and wall thinning, the local velocities according to the analysis results were compared with distribution of the shell wall thicknes by ultrasonic test.

  • PDF

Experimental and Numerical Study on the Characteristics of Free Surface Waves by the Movement of a Circular Cylinder-Shaped Submerged Body in a Single Fluid Layer

  • Jun-Beom Kim;Eun-Hong Min;Weoncheol Koo
    • 한국해양공학회지
    • /
    • 제37권3호
    • /
    • pp.89-98
    • /
    • 2023
  • Analyzing the interactions of free surface waves caused by a submerged-body movement is important as a fundamental study of submerged-body motion. In this study, a two-dimensional mini-towing tank was used to tow an underwater body for analyzing the generation and propagation characteristics of free surface waves. The magnitude of the maximum wave height generated by the underwater body motion increased with the body velocity at shallow submerged depths but did not increase further when the generated wave steepness corresponded to a breaking wave condition. Long-period waves were generated in the forward direction as the body moved initially, and then short-period waves were measured when the body moved at a constant velocity. In numerical simulations based on potential flow, the fluid pressure changes caused by the submerged-body motion were implemented, and the maximum wave height was accurately predicted; however, the complex physical phenomena caused by fluid viscosity and wave breaking in the downstream direction were difficult to implement. This research provides a fundamental understanding of the changes in the free surface caused by a moving underwater body.

체결압이 고분자연료전지 기체확산층의 표면성질에 미치는 영향 (Effect of Clamping Pressure on Surface Properties of Gas Diffusion Layer in PEFCs)

  • 안은진;박구곤;윤영기;박진수;이원용;김창수
    • 전기화학회지
    • /
    • 제10권4호
    • /
    • pp.306-310
    • /
    • 2007
  • 고분자연료전지에 사용되는 다공성 매체인 기체확산층은 그 특성에 따라 원활한 기체의 확산과 물 배출을 결정지으며 그 결과 연료전지 성능과 내구성에까지 영향을 미친다. 최적의 물관리와 기체확산층 내에서의 이상(two phase) 유동이해를 위해서는 실제 체결 조건에서의 기체확산층의 성질을 아는 것이 중요하다. 이에 대해 물리적, 전기화학적, 기계적 성질을 알기 위한 실험 등이 수행되어져 왔다. 하지만 실제 스택의 체결 조건에서 기체확산층의 표면 화학적 변화에 대한 실험은 그다지 알려져 있지 않다. 본 연구에서는 단순한 체결 과정만으로도 기체확산층에 대한 물리화학적인 변화를 야기할 수 있음을 확인하였으며, 기체확산층을 구성하는 탄소 섬유 및 PTFE의 손상과 변형을 전자주사현미경으로 직접 관찰할 수 있었다. 관찰된 물리적 손상이 표면의 소수성 변화에 미치는 영향을 알아보기 위해 표면 원소성분 분석과 농도가 다른 에탄올 수용액 흡수량 측정을 수행하였다. 그 결과 체결압에 의해서 분리판의 rib 전단 및 아래에서 심한 파손이 일어나며, 탄소 섬유의 끊어짐 및 섬유 사이에 존재하는 탄소 파우더 역시 심하게 눌린 현상을 관찰할 수 있었다. 체결과정을 경험한 기체확산층에 대한 liquid uptake양을 확인한 결과, 표면 PTFE 함량의 상대적 감소가 기체확산층의 표면을 소수성에서 친수성으로 변화시켰음을 직접적으로 확인하였다.

Modeling and Interoperability Test Case Generation of a Real-Time QoS Monitoring Protocol

  • Chin, Byoung-Moon;Kim, Sung-Un;Kang, Sung-Won;Park, Chee-Hang
    • ETRI Journal
    • /
    • 제21권4호
    • /
    • pp.52-64
    • /
    • 1999
  • QoS monitoring is a kind of real-time systems which allows each level of the system to track the ongoing QoS levels achieved by the lower network layers. For these systems, real-time communications between corresponding transport protocol objects is essential for their correct behavior. When two or more entities are employed to perform a certain task as in the case of communication protocols, the capability to do so is called interoperability and considered as the essential aspect of correctness of communication systems. This paper describes a formal approach on modeling and interoperability test case generation of a real-time QoS monitoring protocol. For this, we specify the behavior of flow monitoring of transport layer QoS protocol, i.e., METS protocol, which is proposed to address QoS from an end-to-end's point of view, based on QoS architecture model which includes ATM net work in lower layers. We use a real-time Input/Output finite State Machine to model the behavior of real-time flow monitoring over time. From the modeled real-time I/OFSM, we generate interoperability test cases to check the correctness of METS protocol's flow monitoring behaviors for two end systems. A new approach to efficient interoperability testing is described and the method of interoperability test cases generation is shown with the example of METS protocol's flow monitoring. The current TTCN is not appropriate for testing real-time and multimedia systems. Because test events in TTCN are for message-based system and not for stream-based systems, the real-time in TTCN can only be approximated. This paper also proposes the notation of real-time Abstract Test Suite by means of real-time extension of TTCN. This approach gives the advantages that only a few syntactical changes are necessary, and TTCN and real-time TTCN are compatible. This formal approach on interoperability testing can be applied to the real-time protocols related to IMT-2000, B-ISDN and real-time systems.

  • PDF

자연대류를 고려한 스프레이 코팅 룸에서의 온도분포 해석 (Numerical Analysis of Natural Convection inside Spray Coating Room on Temperature Distributions)

  • 김남웅;김보선;김국원
    • 한국산학기술학회논문지
    • /
    • 제20권8호
    • /
    • pp.425-430
    • /
    • 2019
  • 아연말 코팅은 친환경성 및 고성능으로 인하여 널리 사용되고 있다. 일반적으로 코팅온도가 코팅층 두께 및 코팅 품질을 결정하는 주요한 요소이며 아연말 코팅의 경우에도 코팅 룸 내 균일하며 적절한 코팅온도가 요구된다. 본 연구에서는 일반적으로 사용하는 자연대류 상태에서의 아연말 스프레이 코팅 룸의 온도 분포를 해석하기 위해 룸 내부의 공기 유동을 포함하는 열 유동 전산 시뮬레이션을 수행하였다. 3차원 CAD 프로그램인 SolidWorks를 이용하여 스프레이 코팅 룸 전체와 예열실과 건조실을 모두 고려한 모델링을 수행하였으며 ANSYS의 FLUENT 프로그램을 이용하여 열 유동연성 해석을 수행하였다. 해석 결과 스프레이 코팅 룸에서의 온도 분포 특성을 파악할 수 있었으며, 현재의 상태로는 목표 온도 값인 $25^{\circ}C$에 미달하고 있었음을 알 수 있었다. 이에 두 가지 다른 경계조건 (히터를 추가하는 방법과 현재 상태에서 Open 부분을 닫는 방법) 에 대해 열 유동 시뮬레이션을 수행하였으며, 시뮬레이션 결과 히터를 추가하기보다는 Open된 부분을 닫는 방법이 더 좋은 결과를 나타내었다.

수직 흐름 제올라이트 갈대 여과상에 의한 생활하수 처리 (Vertical Flow Zeolite-Filled Reed Bed with Intermittent Feeding for Sewage Treatment)

  • 서정윤
    • KSBB Journal
    • /
    • 제22권2호
    • /
    • pp.102-108
    • /
    • 2007
  • 제올라이트로 충진된 수직 흐름 갈대 여과상에 인공하수를 주입하면서 처리효율을 조사하였다. 여과상 표면적 $m^2$당 1일 314 L의 인공하수가 6시간마다 10분 동안 간헐적으로 주입되었다. 처리수의 pH는 원수보다 감소하였으며, 용존산소 농도는 원수보다 증가하였다. 수직 흐름 여과상에서 각 항목별 연중 평균 처리효율은 SS 89.9%, $COD_{Cr}$ 86.1%, $COD_{Mn}$ 81.2%, BOD 93.3%, T-N 34.0%, $NH_4^+$-N, 97.3%,T-P 34.6%이었다. 처리수 중 T-N의 대부분은 $NO_3^-$-N이었으며 $NO_2^-$-N의 농도는 0.10 mg/L 이하이었다. 처리효율의 계절적 차이는 없었다. 수직 흐름 칼럼실험에서 여재인 제올라이트에 흡착된 인의 형태별 함량은 모든 깊이에서 Ca-P > Fe-P > 환원가용성 Fe-P > Occluded p > Saloid P > Al-P 순이었다. 여과상 깊이별 Al-P를 제외한 모든 종류의 인화합물의 함량은 위층일수록 높았으며, 함량 비율은 깊이가 깊을수록 높아지는 경향이었다. 유기물 함량도 상층 (0$\sim$5 cm 깊이)에 가장 높았으며, 그 이하의 깊이에서는 별 변화가 없었다. 가동기간이 경과할수록 모든 깊이에서 유기물 함량이 증가하였다.

내부식성과 경량성 향상을 위한 비금속 재질 집진판의 2단 전기집진기 집진효율 연구 (The study on collection efficiency of two-stage electrostatic precipitator using non-metallic electrode for improve corrosion resistance and light weight)

  • 안소희;이예완;김예슬;김용진;한방우;김학준
    • 한국입자에어로졸학회지
    • /
    • 제17권2호
    • /
    • pp.21-27
    • /
    • 2021
  • We developed non-metallic electrodes that can replace metallic electrodes of the electrostatic precipitator(ESP) for the purpose of light weight, corrosion resistance, cost reduction. We manufactured three types of collection electrodes made of stainless steel (M), Carbon ink coating layer-Plastic sheet-Carbon ink coating layer (CPC), and Plastic sheet-Carbon ink coating layer-Plastic sheet (PCP). We studied the collection efficiency of a two-stage ESP using oil mist particles with and without collection stage by changing the flow rate, the material of collection electrode, and the applied voltage of the pre-charger module and the collection module. Here we measured concentrations of particles at diameters of 0.45 ㎛ (CMD; count median diameter) and 3.0 ㎛ (MMD : mass median diameter), as well as PM2.5 and PM10. As a result of the experiment, two-stage ESP had 22~25% higher collection efficiency in PM2.5 than one-stage ESP at the same applied voltage. The difference in collection efficiency by varying the materials of collection electrodes was less than 5%. The weight of the non-metallic electrode was only one eighth the weight of the metal electrode. CPC electrode had a thickness of 0.27 mm, which was 1.5 times thinner than a thickness of PCP electrode, so when the flow rate increased, the CPC electrodes couldn't be kept at equal intervals due to the fluttering unlike PCP electrodes. In addition, the PCP-CPC collection module of the present experiment followed the theoretical efficiency based on Deutsch equation and Cochet's charging theory.