• 전기학회논문지
• /
• 제66권2호
• /
• pp.323-327
• /
• 2017

Soft magnetic composite (SMC) material has recently received a significant attention in the area of high-speed machines because of its unique properties such as good design flexibility and low eddy current loss. However, SMC's electromagnetic property is poor compared to silicon steel in terms of saturation, relative permeability, and hysteresis loss. This paper presents a technique for utilization of SMC in two strategic designs of a switched reluctance machine (SRM) depending on a loss pattern. To investigate the effect of SMC's merits and demerits, the stator material is changed from laminated steel to SMC.

• Bulletin of the Korean Chemical Society
• /
• 제33권5호
• /
• pp.1581-1585
• /
• 2012

Two pyridinecarboxamide dicyanidecobalt(III) building blocks and two mononuclear seven-coordinated macrocycle manganese(II) compounds have been rationally selected to assemble cyanide-bridged heterobimetallic complexes, resulting in three cyanide-bridged $Co^{III}-Mn^{II}$ complexes. Single X-ray diffraction analysis show that these complexes $\{[Mn(L^1)][Co(bpb)]\}ClO_4{\cdot}CH_3OH{\cdot}0.5H_2O$ ($\mathbf{1}$), $\{[Mn(L^2)][Co(bpb)]\}ClO_4{\cdot}0.5CH_3OH$ ($\mathbf{2}$) and ${[Mn(L^1)][Co(bpb)]\}ClO_4{\cdot}H_2O$ ($\mathbf{3}$) ($L^1$ = 3,6-diazaoctane-1,8-diamine, $L^2$ = 3,6-dioxaoctano-1,8-diamine; $bpb2^{2-}$ = 1,2-bis(pyridine-2-carboxamido)benzenate, $bpmb2^{2-}$ = 1,2-bis(pyridine-2-carboxamido)-4-methyl-benzenate) all present predictable one-dimensional single chain structures. The molecular structures of these one-dimensional complexes consists of alternating units of $[Mn(L)]^{2+}$ ($L=L^1$ or $L^2$) and $[Co(L^{\prime})(CN)2]^-$ ($L^{\prime}=bpb2^{2-}$, or $bpmb2^{2-}$), forming a cyanide-bridged cationic polymeric chain with free $ClO_4{^-}$ as the balance anion. The coordination geometry of manganese(II) ion in the three one-dimensional complexes is a slightly distorted pentagonal-bipyrimidal with two cyanide nitrogen atoms at the trans positions and $N_5$ or $N_3O_2$ coordinating mode at the equatorial plane from ligand $L^1$ or $L^2$. Investigation over magnetic properties of these complexes reveals that the very weak magnetic coupling between neighboring Mn(II) ions connected by the diamagnetic dicyanidecobalt(III) building block. A best-fit to the magnetic susceptibility of complex ${\mathbf}{1}$ leads to the magnetic coupling constants $J=-0.084(3)cm^{-1}$.

• 천문학회지
• /
• 제53권1호
• /
• pp.1-7
• /
• 2020

The recent study of Chae et al. (2017) found a one-to-one correspondence between plasma blobs outflowing along a ray formed after a coronal mass ejection (CME) and small X-ray flares. In the present work, we have examined the spatial configuration and the eruption process of the flares that are associated with the blobs by analyzing EUV images and magnetograms taken by the SDO/AIA and HMI. We found that the main flare and the successive small flares took place in a quadrupolar magnetic configuration characterized by predominant magnetic fields of positive polarity, two minor magnetic fragments of negative polarity, and a curved polarity inversion line between them, which suggests that the formation process of the blobs may be similar to that of the parent CME. We also found that the successive flares resulted in a gradual change of the quadrupolar magnetic configuration, and the relevant migration of flaring kernels. The three-dimensional geometry and the property of the current sheet, that is often supposed to be embedded in an observed post-CME ray, seem to keep changing because of mutual feedback between the successive flares and the temporal change of the magnetic field configuration. Our results suggest that the observed post-CME rays may not reflect the characteristics of the current sheet responsible for the impulsive phase of the flare.

• Bulletin of the Korean Chemical Society
• /
• 제35권9호
• /
• pp.2684-2688
• /
• 2014

Two two-dimensional cyanide- and phenoxo-bridged heterometallic M(II)-Mn(III) (M = Ni, Pd) coordination polymers $\{[Mn(saltmen)]_4[Ni(CN)_4]\}(ClO_4)_2{\cdot}CH_3OH{\cdot}H_2O$ (1) and $\{[Mn(saltmen)]_4[Pd(CN)_4]\}(ClO_4)_2{\cdot}CH_3CN{\cdot}H_2O$ (2) ($saltmen^{2-}$ = N,N'-(1,1,2,2-tetramethylethylene)bis(salicylideneaminato)dianion) have been obtained by using $K_2[M(CN)_4]$ as building blocks and a salen-tpye Schiff-base manganese(III) compound as assembling segment. Single X-ray analysis reveals their isostrutural cyanide-bridged $MMn_4$ pentanuclear cationic structure. The four Schiff base manganese units of the pentanuclear entity are self-complementary through the phenoxo oxygen atoms from the neighboring complex, therefore forming cyanide- and phenoxo-bridged 2D sheet-like structure. Investigation over magnetic susceptibilities reveals the overall ferromagnetic coupling between the adjacent Mn(III) ions bridged by the phenoxo oxygen atoms with J = 2.13 and $2.21cm^{-1}$ for complexes 1 and 2, respectively.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.107-108
• /
• 2008

The temperature rise of GIS (Gas Insulated Switchgear) busbar system is a vital factor that affects its performance. In this paper, a two-dimensional model is presented by commercial code CFX11 for the evaluation of natural convection in the busbar system. In the model, SF6 (Sulfur Hexafluoride) is used to insulate the high voltage device and improves the heat transfer rate. The power losses of a busbar calculated by the magnetic field analysis are used as the input data to predict the temperature rise by the nature convection analysis. The heat-transfer coefficients on the boundaries are analytically calculated by applying the Nusselt number considering material property and model geometry for the natural convection. The temperatures of the tank and conductors from CFX simulation and the experiment were compared. The results show a good agreement. In the future, we will calculate the 3-D model and try to reduce the temperature by adjusting some dimensional parameters.

• 대한화학회지
• /
• 제60권5호
• /
• pp.321-326
• /
• 2016

Two new polymeric complexes, [Zn(dpa)(pyz)_0.5]_n (1; dpa = diphenate and pyz = pyrazine) and [Mn₃(bpdc)₃(py)₄]_n (2; bpdc = biphenyl-4,4'-dicarboxylate and py = pyridine) were successfully isolated by the hydro- and solvo-thermal technique, respectively. The complexes were characterized by elemental and thermal analysis, vibrational IR spectroscopy, and by single crystal x-ray structure determination. For 2, magnetic property was also investigated. Complex 1 is a two-dimensional layer structure consisting of a paddle-wheel building unit of Zn-dpa chains bridged by pyrazine. While, complex 2 consists of linear trimeric Mn3 cluster as building unit to form 3D network. In the complexes, dpa²⁻ (1) and bpdc²⁻(2) ligands show a typical bis-monodendate bridging and two kinds of bridging modes; a typical bridging and chelating/bridging mode, respectively.

• 한국자기공명학회논문지
• /
• 제19권2호
• /
• pp.95-98
• /
• 2015

Reverse gyrase is a hyperthermophile specific protein which introduces positive supercoils into DNA molecules. Reverse gyrase consists of an N-terminal helicase-like domain and a C-terminal topoisomerase domain. The helicase-like domain shares the three-dimensional structure with two tandem RecA-folds (H1 and H2), in which the subdomain H2 is interrupted by the latch domain (H3). To understand the physical property of the hyperthermophile-specific protein, two subdomains af_H1 and af_H23 have been cloned into E. coli expression vector, pET28a. The $^{15}N$-labeled af_H1 and af_H23 proteins were expressed and purified for heteronuclear NMR study. The af_H1 protein exhibits the well-dispersion of amide signals in its $^1H/^{15}N$-HSQC spectra and thus further NMR study continues to be progressed.

• 한국정보처리학회논문지
• /
• 제3권7호
• /
• pp.1906-1916
• /
• 1996

하악골(mandible)과 같은 3 차원 구조체에 대한 의학적 분석을 위해서는 구조 체 를 분석 가능한 유한 개의 요소로 재구성해야 한다. 3 차원 구조체에 대한 정보 는 2 차원 MRI 횡단면을 통해 얻을 수 있다. 횡단면에서 구조체에 해당하는 부위 를 추출한다. 추출된 부위에 삼각 분할을 적용하여 2 차원 유한 요소를 생성한다. 분할된 2차원 유한 요소들을 공간상에서 서로 매칭(matching)하여 3 차원 유한 요소를 형성할 수 있다. 본 연구에서는 분할된 2 차원 유한 요소들이 지닌 인접 정보 특성을 통해 최적 3 차원 유한 요소를 형성한는 기법을 제안한다. 삼각 분할된 2 차원 유한 요소들이 지닌 인접 정보에 의해 동일 특성을 같는 요소들로 분류한다. 분류된 2 차원 요소 들에 다단계 매칭 알고리즘을 적용하여 최적의 3 차원 하악골 구조체에 대한 다양 한 의학적 정보를 획득할 수 있다.

• Investigative Magnetic Resonance Imaging
• /
• 제13권1호
• /
• pp.22-30
• /
• 2009

목적 : 자기공명영상화는 보통 긴 스캔 시간으로 인해 환자의 움직임이 큰 문제가 된다. 이러한 환자의 움직임을 보정하기 위한 한가지 방법인 영상의 엔트로피(entropy)를 이용한 후처리 방법은 다른 추가 데이터 획득 없이 효과적으로 움직임 인공물을 줄일 수 있음을 보였다. 하지만 이 방법의 가장 큰 문제는 처리 시간이 매우 길다는데 있다. 본 연구에서는 움직임 보정 처리시간을 줄이는 방법을 제안한다. 대상 및 방법 : 전체적인 보정 시간을 줄이기 위한 첫 번째 방법은, 퓨리에 변환의 분리성을 이용하여 전체적인 퓨리에 변환시간을 줄일 수 있다. 영상의 엔트로피 기준을 대신해 영상의 전체 화소의 합(pixel sum)을 움직임 보정의 기준으로 이용하여 영상 기준을 계산하는 시간을 절반 이하로 줄일 수 있다. 마지막으로 부분 퓨리에 재구성 방법을 조합하여 움직임의 영향을 보정하는 k-공간의 데이터 량을 줄임으로써 전체적인 처리 시간을 큰 폭으로 줄일 수 있다. 결과 : 제안한 방법을 사용하여 보정한 영상의 품질은 엔트로피를 이용한 보정 방법과 거의 흡사했으며, 대신 전체적인 처리 시간을 2차원 영상에서 15%로, 3차원 영상에서 30%로 줄일 수 있었다. 결론 : 제안한 방법을 병렬 영상화 기법 등과 결합하여 영상 보정 시간을 더욱 줄일 수 있을 것으로 기대한다. 제안하는 방법은 다른 보정 기법을 사용할 수 없을 때, 영상에서 움직임의 영향을 줄이는 방법으로 유용할 것으로 기대한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.139-141
• /
• 1996

The switched reluctance motors(SRM) are simple and robust in structure. Because the wide range of power and speed, their application field is increasing. In order to design the motors and to evaluate the performance of them properly, an accurate study about the analysis of motor characteristics is required. In this paper, for the analysis of SRM characteristics, the finite element method which is based on the solution of combined equations both the electromagnetic field equations and the circuit equations of stator is adopted. The analysis model is to he assumed two-dimensional and the nonlinear property of magnetic materials is considered by Newton-Raphson method. To verify the usefulness of the proposed algorithm, commercial SRM is chosen and simulated. The computed torques obtained by Maxwell Stress Tensor are compared with the experimental data and it is found that they are in good agreement. By applying the proposed algorithm to two cases, currents of stator and torques at every angular positions of rotor are obtained step by step. Comparing them, one can recognize that torque ripple of SRM can he improved by controlling the switching sequences of driving circuits.