• 한국습지학회지
• /
• 제10권3호
• /
• pp.99-109
• /
• 2008

본 연구는 I편에서 개발된 일체형 블록시스템의 수리모형실험 결과를 검증하고 호안블록의 효과를 해석하기 위하여 수치해석을 통한 수리모형 실험을 수리특성을 모의하고자 하였다. 하도내 적용된 일체형 호안블록의 수치해석을 위하여 1차원 HEC-RAS 모형과 2차원 흐름 모의를 위하여 RMA-2 모형을 적용하여 식생전후의 수리현상을 수리모형 실험결과와 비교하여 홍수 시 유속 저감효과의 분석 및 대안으로 제시하는데 그 목적이 있다. 분석결과 2차원 수치해석 모형이 1차원 수치해석보다는 수위 유속 모두 수리모형실험결과와 근접한 결과를 나타내어 수치해석을 통한 자료구축 시 좀 더 신뢰성 있는 자료를 구축할 수 있는 것으로 판단되었다. 유속은 최저 0.21m/sec에서 최대 1.89m/sec의 저감효과를 나타내었으며, 이는 100m 당 4.89sec에서 7.33sec의 지체시간을 가져오는 것으로 분석되었다.

• Nuclear Engineering and Technology
• /
• 제54권4호
• /
• pp.1495-1507
• /
• 2022

The improvement of thermal-hydraulic analysis techniques is essential to ensure the safety and reliability of nuclear power plants. The one-dimensional two-fluid model has been adopted in state-of-the-art thermal-hydraulic system codes. Current constitutive equations used in the system codes reach a mature level. Some exceptions are the partition method of wall friction in the momentum equation of the two-fluid model and the interfacial drag force model for a horizontal two-phase flow. This study is focused on deriving the partition method of wall friction in the momentum equation of the two-fluid model and modeling the interfacial drag force model for a horizontal bubbly flow. The one-dimensional momentum equation in the two-fluid model is derived from the local momentum equation. The derived one-dimensional momentum equation demonstrates that total wall friction should be apportioned to gas and liquid phases based on the phasic volume fraction, which is the same as that used in the SPACE code. The constitutive equations for the interfacial drag force are also identified. Based on the assessments, the Rassame-Hibiki correlation, Hibiki-Ishii correlation, Ishii-Zuber correlation, and Rassame-Hibiki correlation are recommended for computing the distribution parameter, interfacial area concentration, drag coefficient, and relative velocity covariance of a horizontal bubbly flow, respectively.

• 대한기계학회논문집
• /
• 제17권8호
• /
• pp.2043-2050
• /
• 1993

This paper presents a three dimensional modeling and dynamic analysis of a hydraulic excavator. An excavator composed of a boom, a bucket, two boom cylinders, an arm cylinder, and a bucket cylinder is used for the analysis. Each cylinder is modeled to two separate bodies linked by a translational joint. Judging from the actual degrees of freedom of the excavator, proper kinematic joints are selected to exclude redundant constraints in the modeling. In order to find the reaction forces at kinematic joints during operations, inverse dynamic analysis is carried out. Dynamic analysis is also carried out to verify the results from inverse dynamic analysis. The DADS program is used for analysis, with proper modification of the DADS user routine according to various motions.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(1)
• /
• pp.186-187
• /
• 2005

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2006년도 총회 및 춘계학술발표회
• /
• pp.293-297
• /
• 2006

Submarine groundwater discharge (SGD) and the interface between seawater and freshwater in an unconfined coastal aquifer was evaluated by numerical modeling. A two-dimensional vertical cross section of the aquifer was constructed. Coupled flow and salinity transport modeling were peformed by using a numerical code FEFLOW In this study, we investigated the changes in groundwater flow and salinity transport in coastal aquifer with hydraulic condition such as the magnitude of recharge flux, hydraulic conductivity. Especially, transient simulation considering tidal effect and seasonal change of recharge rate was simulated to compare the difference between quasi-steady state and transient state. Results show that SGD flux is in proportion to the recharge rate and hydraulic conductivity, and the interface between the seawater and the freshwater shows somewhat retreat toward the seaside as recharge flux increases. Considered tidal effect, SGD flux and flow directions are affected by continuous change of the sea level and the interface shows more dispersed pattern affected by velocity variation. The cases which represent variable daily recharge rate instead of annual average value also shows remarkably different result from the quasi-steady case, implying the importance of transient state simulation.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2010년도 학술발표회
• /
• pp.659-663
• /
• 2010

In recent, flood inundation damages by hydraulic structure failures have increased drastically and thus a variety of countermeasures were needed to minimize such damages. A real-time flood inundation prediction technique is essential to protect and mitigate flood inundation damages. In the context of real time flood inundation modeling, this study aims to develop a grid based two-dimensional numerical method for flood inundation modeling using globally-available DEM data: SRTM with $90m{\times}90m$ spatial resolution. The newly-developed model guarantees computational efficiency in terms of geometric data processing by direct application of DEM for flood inundation modeling and also have good compatibility with various types of raster data when compared to a commercial model such as FLUMEN. The model, which employed the leap-frog algorithm to solve shallow water and continuity equations, can simulate inundating flow from channel to lowland and also returning flow from lowland to channel by comparing water levels between channel and lowland in real time. We applied the model to simulate the BaekSan levee break in the Nam river during a flood period from August 10 to 13, 2002. The simulation results had good agreements with the field-surveyed data in terms of inundated area and also showed physically-acceptable velocity vector maps with respect to inundating and returning flows.

• 한국습지학회지
• /
• 제10권3호
• /
• pp.87-97
• /
• 2008

본 연구는 현재 대부분의 자연형 하천에 적용되는 프리캐스트 호안블록 대신 현장 타설식 일체형 블록시스템을 개발하고 수리특성분석을 위하여 수리모형 실험을 실시하여 수위와 유속의 변화를 통하여 호안 적용성을 검토하였다. 기존의 프리캐스트 불록은 홍수 시 빠른 유속과 집중하중에 유실 및 탈락의 문제점이 나타나고 있으나 이를 보완한 일체형 호안블록 시스템은 홍수시나 수충부에 적합한 호안식생블록 시스템이다. 수리모형실험에서는 성덕댐이 위치한 보현천의 하도에 1/50 축척으로 모형을 재현하고 설계홍수량을 방류하는 조건으로 하도에서 원형과 개발된 블록의 식생유무에 대한 흐름 및 특성의 변화를 검토하였다. 검토결과, 설계홍수량 $200m^3/sec$에서 유속 저감 평균 10.1%, 수위 상승 평균 17.8%의 실험 결과를 얻었다. 연구(II)에서는 수치모형실험을 통하여 실험결과를 검증하고자 하였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제25권2호
• /
• pp.1-8
• /
• 2020

In general, the estimation of optimum yield for the radial collector well is determined by the empirical equation or numerical modeling, in which hydraulic conductivity of the aquifer is a main influence factor. Hydraulic conductivities of 164 soil samples collected from boreholes and horizontal wells (average length: about 50 m) installed during well construction in the Anseong stream were drawn in two-dimensional map by the Kriging method and utilized in this study. Hydraulic conductivity analyses by Representative Elementary Count (REC) indicated the average hydraulic conductivity is similar to that of the pumping test when the number of samples reaches about 1,000, which correspond to 1,000 ㎡. Pumping test was also conducted at 1 pumping well and 13 observation wells to estimate hydraulic conductivities at each observation well. REC analysis indicated that the average value of hydraulic conductivity calculated from at least four observation wells is valid as a representative value. The overall result suggested that multiple observation wells or multiple pumping-observation well systems that are located within the range of horizontal wells should be utilized to properly estimate the representative hydraulic conductivity values and the yield of a radial collector well.

• Nuclear Engineering and Technology
• /
• 제45권5호
• /
• pp.613-624
• /
• 2013

Multi-dimensional two-phase phenomena occur in many industrial applications, particularly in a nuclear reactor during steady operation or a transient period. Appropriate modeling of complicated behavior induced by a multi-dimensional flow is important for the reactor safety analysis results. SPACE, a safety analysis code for thermal hydraulic systems which is currently being developed, was designed to have the capacity of multi-dimensional two-phase thermo-dynamic phenomena induced in the various phases of a nuclear system. To validate the performance of SPACE, a two-dimensional two-phase flow test was performed with slab geometry of the test section having a scale of $1.43m{\times}1.43m{\times}0.11m$. The test section has three inlet and three outlet nozzles on the bottom and top gap walls, respectively, and two outlet nozzles installed directly on the surface of the slab. Various kinds of two-dimensional air/water flows were simulated by selecting combinations of the inlet and outlet nozzles. In this study, two-dimensional two-phase void fraction profiles were quantified by measuring the local gap impedance at 225 points. The flow conditions cover various flow regimes by controlling the flow rate at the inlet boundary. For each selected inlet and outlet nozzle combination, the water flow rate ranged from 2 to 20 kg/s, and the air flow rate ranged from 2.0 to 20 g/s, which corresponds to 0.4 to 4 m/s and 0.2 to 2.3 m/s of the superficial liquid and gas velocities based on the inlet port area, respectively.

• Ecology and Resilient Infrastructure
• /
• 제2권2호
• /
• pp.137-146
• /
• 2015

하천 본류와 구하도 사이의 횡적 연결성은 하천-홍수터 생태계에서 생태적 기능을 유지하는데 매우 중요하다. 본 연구는 2차원 평균수심 유한요소 모형인 River2D를 사용하여 만경강에서 직강화로 인해 격리된 구하도의 연결성을 가상으로 복원하고 평수기와 홍수기 조건에서 어류 서식처 변화를 평가하였다. 평가 대상 어종은 정수성 어종인 붕어 (Carassius auratus)와 유수성 어종인 피라미 (Zacco platypus)를 선정하였다. 물리서식처모의 결과에 의하면, 연결성 복원 전후의 붕어와 피라미의 가중가용면적 (weighted usable area, WUA)은 복원 후에 증가하였으며 양방향 복원이 일방향 복원보다 어류 서식처 복원에 효과적이었다. 또한 가중가용면적의 증가율은 평수기보다 홍수기에 더 높았다. 특히 피라미의 경우 홍수기에 구하도의 연결성이 양방향 복원되었을때 구하도 내의 가중가용면적이 복원 전 대비 약 4배로 크게 증가할 것으로 예측되었다. 본 연구 결과 만경강에서 본류와 구하도의 연결성이 복원되었을 때 정수성 어류와 유수성 어류의 서식처가 모두 증가할 것으로 예상되며, 일방향 복원보다 양방향 복원이 더 효과적인 것으로 나타났다. 또한 복원된 구하도는 홍수기 때 어류의 피난처 역할을 할 것으로 기대되었다.