• Smart Media Journal
• /
• v.12 no.11
• /
• pp.211-221
• /
• 2023

In the context of integration of culture and tourism, the effective application of folk art in cultural creative products is of great significance to the development of local cultural industry. Xuzhou paper-cutting is the only world-class intangible cultural heritage project in the northern Jiangsu region of China. Its high humanistic value and artistic characteristics are widely used in modern art design. The application of cultural and creative products relative to paper-cutting in Xuzhou mainly focuses on two-dimensional decorative and ornamental products, which is short of diversity in form and not practical. In addition, it doesn't meet the aesthetic needs of living of modern people, This article studies paper-cut works by Wang Guiying and proposes principles for the design of cultural and creative products relative to paper-cutting by analyzing the typical "goose" pattern in Wang's paper cutting handcrafts. By exploring the application value of Xuzhou paper-cutting in cultural and creative product design and demonstrating the feasibility of the design principles via visiting experts, this article hopes to provide some reference for the modern inheritance and innovative development of paper-cutting culture.

• IE interfaces
• /
• v.21 no.1
• /
• pp.8-17
• /
• 2008

A new search procedure, VLT(Vertex Line Tracing) heuristic, for two dimensional irregular shapes nesting problem was suggested in this study. The VLT heuristic was suggested to the nesting problem to overcome disadvantages of the existing NFP(No-Fit-Polygon) method. This VLT heuristic was compared with the results of the existing benchmark problems suggested by Albano, Hopper, and Burke. The results of the VLT heuristic give efficient solutions in the point of the scrap ratio and computation time. A computer program, NestLogic, using C++ for VLT heuristic was also developed for this nesting problem.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.873-876
• /
• 2003

Z-map model is the most widely used model for NC simulation and verification. But it has several limitations to get a high precision, to apply 5 axis machining simulation. In this paper, we tried to use quadtree for searching cutting region. Quadtree representation of two dimensional objects is performed with a tree that describes the recursive subdivision. By using these quadtree model. storage requirements were reduced. And also, recursive subdivision was processed in the boundries, so, useless computation could be reduced, too. To get more high Accuracy, we applied the supersampling method in the boundaries. The Supersampling method is the most common form of the antialiasing and usually used with polygon mesh rendering in computer graphics To verify quadtree model we compared simulated results with z-map model and enhanced z-map model

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.3
• /
• pp.24-28
• /
• 2005

Stress state of chip formation zone is one of the main problems in metal cutting mechanics. In two-dimensional case this process is usually considered as consistent shears of work material along one of several shear surfaces, separating chip from workpiece. These shear planes are assumed to be trajectories of maximum shear stress forming corresponding slip-line field. This paper suggests a new approach to the constriction of slip-line field, which implies uniform compression in chip formation zone. Based on the given model it has been found that imaginary shear line in orthogonal cutting is close to the trajectory of maximum normal stress and the problem about its determination has been considered as well. It has been shown that there is a second central slip-line field inside chip, which corresponds well to experimental data about stress distribution on tool rake face and tool-chip contact length. The suggested model would be useful in understanding mechanistic problems in machining.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.7
• /
• pp.834-841
• /
• 2004

Experimental study on the three-dimensional topology of hairpin packet structures in turbulent boundary layers were carried out. Two different Reynolds number based on momentum thickness, Re$\sub$$\theta$/=514 and 934 were generated in a blowing type wind tunnel under the condition of zero pressure gradient. Simultaneous measurements of velocity fields at a wall-normal plane and wall-parallel plane by a plane PIV and a Stereo-PIV systems. The two Nd:Yag laser systems and three CCD cameras were synchronized to obtain instantaneous velocity fields at the same time. To avoid optical noise at the crossing line by the two laser light sheets, a new optical arrangement using polarization was applied. The obtained velocity fields show the existence of hairpin packet structure vividly and the idealized hairpin vortex signature is confirmed by experiment. Two counter-rotating vortex pair which reflects the cutting plane of hairpin legs are found both side of a strong streaky structure when the wall-normal plane cuts the hairpin head.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.1
• /
• pp.169-181
• /
• 2016

This study analyzed the characteristics and patterns of men's drawers panties to get basic data for their design. For this, drawers panties in 7 different brands (4: domestic brands, 3: imported brands) in terms of a front-center shape were collected, and the shape of men's drawers panties, characteristics of the materials, dimensions & type of patterns by the part and front-center patterns were analyzed. The study results found the followings: First, in terms of the shape of men's drawers panties, the front-center part were designed to rest the penis and scrotum in a natural and comfortable manner without a pee slit. They were seamless on the sides except for one product with side seams. Second, the drawer panties were made of elastic polyurethane materials. Specifically, domestic brand items used warm, elastic and durable nylon, polyester and rayon and polyurethanes while imported brands were mostly made of absorbent and sanitary polyurethanes. Third, regarding a size of drawer panties by part, imported brands were large in waist circumference. In terms of waist breadth at the front center, there was difference depending on an oval type. In addition, the front length at the front center differed by product, revealing difference in three-dimensional effect at the front center. The side length also differed greatly by product, which means that there might be a great difference in wear comfort. Fourth, in terms of the patterns of men's drawers panties, there was difference in side seams, center back seam and front-center patterns. Among a total of 7 products, only one product had side seams, and center back seams were found in two products only. Fifth, in terms of front-center patterns, the drawer panties can be divided into three types, creating three-dimensional effect not to give any pressure on the crotch: i) the cutting line only at the bottom of the front center part where the penis is rested, ii) puff created at the front center by adding a transverse line to the center line, iii) cutting transverse line to separate the penis from the testicles.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.9 s.174
• /
• pp.188-193
• /
• 2005

To provide the various machining materials with excellent quality and dimensional accuracy, high -speed machining is very useful tool as one of the most effective rapid manufacturing processes. However, high-speed machining is not suitable for microscale thin-walled structures because of the lack of the structure stiffness to resist the cutting force. A new method which is able to make a very thin-walled structure rapidly will be proposed in this paper. This method is composed two processes, high-speed machining and filling process. Strong workholding force comes out of the solidification of filling materials. Low-melting point metal alloys are used in order to minimize the thermal effect during phase change and to hold arbitrary shape thin-walled structures quickly during high-speed machining. To verify the usefulness of this method, we will show some applications, for examples thin -wall cylinders and hemispherical shells, and compare the experimental results to analyze the dimensional accuracy of typical parts of the structures.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.115-116
• /
• 2002

This study was carried out as one of efforts to overcome difficulties in air bearing design due to low stiffness and low damping. Hydrodynamic effects on hydrodynamic stiffness of a fluid film in a high speed air bearing with tow-row air sources are investigated. The hydrodynamic effects by the high speed over DN 1,000,000 and eccentricity of a proceeding which are not considered in conventional design of an air bearing need to be reconsidered. The hydrodynamic effects, which dominantly influence on the load capacity of air bearing, are caused mainly by proceeding speed, eccentricity, and the source positions. The two-row source arrangement in the air bearing produces quite unique hydrodynamic effects with respect to pressure distribution of the air film. Optimal arrangement of the two-row sources improves performance of an air bearing in film reaction force and loading capacity of high speed spindles. This study compares the pressure distribution by numerical simulation as a function of eccentricity of proceeding and the source positions. The air source position 1/7L form one end of an air bearing was found to be superior to source position of 1/4L. The dynamic stiffness were obtained using a two-dimensional cutting method which can directly measure the cutting reaction forces and the displacements of the spindle in two directions using a tool dynamometer and transducer sensors. Heat generation in the air film can not be negligible over the speed of DN 2,000,000. In order to analysis effects of heat generation on the characteristics of air bearing, high cooling bearing spindle and low cooling bearing spindle were tested and compared. Characteristics of the frequency response of shaft and motion of run out errors were different for the spindle. The test results show that, in the case of low cooling bearing spindle, the stiffness became smaller due to heat generation. The results, which were obtained for high speed region, may be used as a design information for spindle which can be applied to precision devices such as ultra precision grinding and ultra high speed milling.

• Journal of computational fluids engineering
• /
• v.4 no.3
• /
• pp.52-62
• /
• 1999

The development of a parallelized aerodynamic simulation process involving moving bodies is presented. The implementation of this process is demonstrated using a fully systemized Chimera methodology for steady and unsteady problems. This methodology consists of a Chimera hole-cutting, a new cut-paste algorithm for optimal mesh interface generation and a two-step search method for donor cell identification. It is fully automated and requires minimal user input. All procedures of the Chimera technique are parallelized on the Cray T3E using the MPI library. Two and three-dimensional examples are chosen to demonstrate the effectiveness and parallel performance of this procedure.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.05a
• /
• pp.137-142
• /
• 2006

제철소 후판공장에서는 두꺼운 슬라브(Slab)를 압연하여 사각형태의 철판인 날판(Mother Plate)을 생산하고, 이를 주문(Plate) 사이즈에 맞게 다시 절단을 하게 된다. 이때 동일 슬라브라 하더라도 압연방법에 따라 다양한 사이즈의 날판을 생산할 수 있다. 여기에서 다루고 있는 후판 날판설계 문제는 주어진 주문을 대상으로 최소 개수의 슬라브를 사용하여 생산하는 문제를 말한다. 이를 위해 최적의 날판 사이즈를 결정하고, 각 날판에 주문들을 배치하게 된다. 본 논문에서는 후판 날판설계문제를 two-stage guillotine cutting problem의 변이로 모델을 세우고, 이를 위한 효율적인 휴리스틱을 제시하였다. 그리고 실 데이터를 대상으로 컴퓨터 실험을 통해 휴리스틱을 효율성을 검정하였다.