• ETRI Journal
• /
• v.29 no.5
• /
• pp.670-672
• /
• 2007

An ultra-wideband low-noise amplifier is proposed with operation up to 8.2 GHz. The amplifier is fabricated with a 0.18-${\mu}m$ CMOS process and adopts a two-stage cascode architecture and a simplified Chebyshev filter for high gain, wide band, input-impedance matching, and low noise. The gain of 19.2 dB and minimum noise figure of 3.3 dB are measured over 3.4 to 8.2 GHz while consuming 17.3 mW of power. The Proposed UWB LNA achieves a measured power-gain bandwidth product of 399.4 GHz.

• Journal of Power Electronics
• /
• v.10 no.2
• /
• pp.155-164
• /
• 2010

This paper presents a voltage control algorithm for a hybrid multilevel inverter based on a staged-perception of the inverter voltage vector diagram. The algorithm is applied to control a three-stage eighteen-level hybrid inverter, which has been designed with a maximum number of symmetrical levels. The inverter has a two-level main stage built using a conventional six-switch inverter and medium- and low- voltage three-level stages constructed using cascaded H-bridge cells. The distinctive feature of the proposed algorithm is its ability to avoid the undesirable high switching frequency for high- and medium- voltage stages despite the fact that the inverter's dc sources voltages are selected to maximize the number of levels by state redundancy elimination. The high- and medium- voltage stages switching algorithms have been developed to assure fundamental switching frequency operation of the high voltage stage and not more than few times this frequency for the medium voltage stage. The low voltage stage is controlled using a SVPWM to achieve the reference voltage vector exactly and to set the order of the dominant harmonics. The inverter has been constructed and the control algorithm has been implemented. Test results show that the proposed algorithm achieves the desired features and all of the major hypotheses have been verified.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.4
• /
• pp.268-272
• /
• 2019

A lithium polymer battery-based 9 kJ/s high-voltage capacitor charger, which comprises two stages, is proposed. A modified LCC resonant converter and resonant circuit are introduced at the first and second stages, respectively. In the first stage, the methods for handling low-voltage and high-current batteries are considered. Delta-wye three-phase transformers are used to generate a high output voltage through the difference between the phase and line-to-line voltages. Another method is placing the series resonant capacitor of the LCC resonant components on the transformer secondary side, which conducts considerably low current compared with the transformer primary side. On the basis of the stable operation of the first charging stage, the secondary charging stage generates final output voltage by using the resonance. This additional stage protects the rectifying diodes from the negative voltage when the output capacitor is discharged for a short time. The inductance and capacitance of the resonance components are selected by considering the resonance charging time. The design procedure for each stage with the aforementioned features is suggested, and its performance is verified by not only simulation but also experimental results.

• Journal of Korean Foot and Ankle Society
• /
• v.10 no.1
• /
• pp.48-55
• /
• 2006

Purpose: The purpose of this study is to assess the results of the autologous osteochondral grafting for the osteochondral lesion of the talus. Materials and Methods: This study included 21 patient who had been treated with the open autologous osteochondral grafting between December, 1999 and December 2003. We treated the patients with autologous osteochondral grafting method who had the lesion of stage II or medial lesion of stage III without improvement for at least 6 months, the medial lesion of stage IV, the lateral lesion of stage III, IV by Berndt and Harty's classification or who had not improved with previous operation. The average duration of follow up was 26 (12-56) months. 6 patients had been treated with the previous operation that 3 patients with drilling, 3 patients excision, curettage and drilling. Results: The average AOFAS Ankle/Hindfoot score was 92.7 points and no patient had a limitation of the daily activities due to pain or abnormal function. Postoperative radiography showed good joint congruency and postoperative MRI good incorporation of the graft. The average Lysholm knee score was 96 points and only two patients had mild knee pain during severe exertion. Conclusion: The autologous osteochondral grafting is the useful operative method when the lesion is advanced stage or when previous operative treatment has failed.

• The Journal of the Korean bone and joint tumor society
• /
• v.4 no.1
• /
• pp.30-36
• /
• 1998

Squamous cell carcinoma is a neglected disease entity in orthopedic oncology. The purpose of this study was to analyze overall survival and the role of surgery on survival and to evaluate the significance of possible prognostic factors. From Oct, 1986 to Aug, 1996, 57 patients were enlisted and 42 patients ere eligible. Inclusion criteria included more than one year follow-up and no distant metastasis at the first visit. Staging and survival followed AJC classification and Kaplan-Meier plot. Stage II included 17 cases and stage III, 25 cases. Thirty-eight patients underwent operations, chemotherapy, and/or radiotherapy, and the remaining four had operations only. The chemotherapeutic regimen was adriamycin-cisplatin. The average follow-up period was 45 months. The ten-year actuarial survival rate of whole patients was 65.4%. Location of primary lesion, stage, pathologic grading, and intensity of chemotherapy in the same stage showed a significant difference in survival. Nine out of 42 patients had local recurrence. Seven patients had inadequate wide margins and two had intralesional margins. Average period of recurrence from operation was 13(4-35)months. The operation itself had no impact on survival but a surgical margin of no less than 3cm from the lesion was important for local control. Pathological grade and staging were significant variables for long term survival. Acral lesion had a significantly higher chance of regional and distant metastasis but actual survival showed no difference. In stage II, aggressive chemotherapy could delay or reduce the chance of regional or distant metastasis.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.763-768
• /
• 1994

A hierarchical Petri- net is utilized in supervising an automated vehicle system, The supervisory system is supported by computer networking in order to facilitate necessary processing, and consists of control flow level and computer allocation level so that a designer and an operator can easily build and/or access to each level. There are two modes of utilizing Petri net here in this paper. One is to employ it in designing the control system, in order to optimally allocate computers in every stage of processing. The other is for supervision of the system in operation, in order for the operator to be in a easy-to-comprehend environment of operation. The effect of these two modes of utilizing Petri net is examined.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.2
• /
• pp.292-295
• /
• 2002

A chromate-resistant white rot fungus, Inonotus cuticularis, abundant in oak trees, was isolated for chromate removal and detoxification of chromate. Inonotus cuticularis was also investigated for an optimal waste treatment system. The screened cells were able to reduce an initial chromate concentration of as high as 1,300 ppm. Cell growth kinetics showed that the optimum culture conditions in flasks were at $33^{\circ}C$ and pH 4.2. Furthermore, the cells were able to remove $54\%$ of the initial chromate by a two-stage operation based on the combination of a fermentor and airlift reactor.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.229-231
• /
• 2021

In this paper, we describe a hardware design of the SIMECK block cipher algorithm that can be implemented in lightweight hardware with appropriate security strength. To achieve fast encryption and decryption operations, it was designed using two-step method that reduces the number of operation rounds. The designed SIMECK cryptographic core was implemented in Arty S7-50 FPGA device and its hardware operation was verified with a GUI using Python.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2843-2846
• /
• 2003

This paper proposes a PWM(Pulse Width Modulation) circuit using CMOS OTA with a single-voltage supply. The OTA employed has an input stage which consists of a pair of two MOSFETs operating in plural operation regions. The MOSFETs work complemetarily and realize a rail-to-rail input range. The input stage requires no matching of an n-channel type input circuit and a p-channel type input circuit unlike conventional rail-to-rail input stages because the input stage is realized by single channel type MOSFETs. In order to confirm the validity of the proposed circuit, it is simulated by H-SPICE program. Futhermore, the proposed circuit will be integrated on chip using 0.35 $\mu\textrm{m}$ CMOS technology.

• Journal of Korean Neurosurgical Society
• /
• v.43 no.1
• /
• pp.57-60
• /
• 2008

The authors herein propose the staged excision as a novel strategy to preserve facial nerve and minimize complication during microsurgery of large vestibular schwannoma (VS). At the first stage, for reducing mass effect on the brain stem and cerebellum, subtotal tumor resection was performed via a retrosigmoid craniotomy without intervention of meatal portion of tumor. With total resection of the remaining tumor, the facial nerve was decompressed and delineated during the second stage translabyrinthine approach at a later date. A 38-year-old female who underwent the staging operation for resection of her huge VS is illustrated.