• Environmental and Resource Economics Review
• /
• v.14 no.2
• /
• pp.447-474
• /
• 2005

Respondents, in the willingness to pay (WTP) survey, may have preference intensity about their stated WTP values. This study elicited a post-decisional intensity measure for each observed WTP answer for gathering information on the degree of preference intensity. In order to deal with the WTP data with preference intensity, this paper considers using the Type 3 Tobit model. This is usually estimated by the parametric two-stage estimation method assuming homoskedastic and bivariate normal error structure. However, if the assumptions are not satisfied, the estimates are inconsistent. The author has tested the hypotheses of homoskedasticity and normality, and could not accept them at the 1% level. The assumptions required to estimate the parametric Type 3 model are, therefore, too strong to be satisfied. As an alternative the parametric model, this study applies a semiparametric Type 3 Tobit model. The results show that the semiparametric model significantly outperforms the parametric model, and that more importantly, the mean WTP from the parametric model is significantly different from that from the semiparametric model.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.4
• /
• pp.29-38
• /
• 2003

This paper deals with an automated computer-aided process planning and die design system with which designer can determine operation sequences even after only a little experience in process planning and die design of multi former-bolt products by multi-stage former working. The approach is based on knowledge-based rules, and a process knowledge base consisting of design rules is built. Knowledge fur the system is formulated from plasticity theories, empirical results and the empirical knowledge of field experts. Programs for the system have been written in AutoLISP for AutoCAD with a personal computer. An attempt is made to link programs incorporating a number of expert design rules with the process variables obtained by commercial FEM softwares, DEFORM and ANSYS, to form a useful package. The system is composed of four main modules. The process planning and die design module considers several factors, such as the complexities of preform geometry, punch and die profiles, specifications of available multi former, and the availability of standard parts. It can provide a flexible process based on either the reduction in the number of forming sequences by combining the possible two processes in sequence, or the reduction of deviation of the distribution and the level of the required forming loads by controlling the forming ratios. The system uses 2D geometry recognition and is integrated with the technology of process planning, die design, and CAE analysis. The standardization of die parts for multi former-bolt products requiring a cold forging process is described. The system developed makes it possible to design and manufacture multi former-bolt products more efficiently.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.2
• /
• pp.287-298
• /
• 1989

A numerical work was performed to study the flow behaviors of the open channel type flow with its geometric boundary conditions being similar to that of the Multi-Stage-Flash evaporator with and without a baffle. For the analysis, two-dimensional steady turbulent flow was assumed and the widely known k-.epsilon. turbulence model was usded. SIMPLE algorithm and the power difference scheme were used for the numerical approach. Numerical results generally agree with the previous experimental results though there are some uncertainties at far downstream and near the free surface due to the three dimensionality of the flow and surface waves. Without a baffle, the flow has basically the shape of the submerged plane wall jet with its upper boundary at downstream being sharply curved toward the free surface. For the flow with a baffle, recirculation flow patterns are observed at the upper inlet portion and at the backside of the baffle. For the case without a baffle, it was also confirmed that the ratio between the liquid level and the gate opening height is the most important parameter to determine the flow behavior.

• Journal of Animal Science and Technology
• /
• v.62 no.3
• /
• pp.321-333
• /
• 2020

Beef quality is influenced by the fattening period. Therefore, meat metabolomics profiles from the different fattening periods (e.g., short-term vs. long-term) were analyzed for identify potential indicators using nuclear magnetic resonance. Additionally, blood, free fatty acid, sensory, and mineral compositions in Korean steers were determined. Blood, free fatty acid, and mineral concentrations showed significant differences between short-term and long-term groups that were fed different diets. However, there were no sensory differences in the two fattening groups. Additionally, the metabolic profiles of meats were clearly separated based on multivariate orthogonal partial least square discriminant analysis. Six metabolites of variable importance in the projection plot were identified and showed high sensitivity as candidate markers for meat characteristics. In particular, lactate, carnosine, and creatine could be directly linked to scientific indicators of the fattening stage (31 vs. 28 mo) of meat. Our findings suggest that the metabolomics approach could be a powerful method for the detection of novel signatures underlying the managing period of beef.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.46 no.4
• /
• pp.250-257
• /
• 2020

Objectives: Palatal infiltration is the most painful and uncomfortable anesthesia technique for maxillary impacted third molar surgery (MITMS). This approach could cause patients distress and aversion to dental treatment. The aim of this study was to evaluate the anesthetic efficacy of a buccal infiltration injection without a palatal injection in MITMS. Materials and Methods: This prospective research study was a crossover split mouth-randomized controlled trial. Twenty-eight healthy symmetrical bilateral MITMS patients (mean age, 23 years) were randomly assigned to two groups. Buccal infiltration injections without palatal injections were designated as the study group and the buccal with palatal infiltration cases were the control group, using 4% articaine and 1:100,000 epinephrine. The operation started after 10 minutes of infiltration. Pain assessment was done using a visual analogue scale and a numeric rating scale after each injection and extraction procedure. Similarly, the success rate, hemodynamic parameters, and additional requested local anesthetic were assessed. Results: The results showed that the pain associated with local anesthetic injections between both groups were significantly different. However, the success rates between the groups were not significantly different. Postoperative pain was not significant between both groups and a few patients requested an additional local anesthetic, but the results were not statistically significant. For hemodynamic parameters, there was a significant difference in systolic pressure during incision, bone removal, and tooth elevation. In comparison, during the incision stage there was a significant difference in diastolic pressure; however, other steps in the intervention were not significantly different between groups. Conclusion: We concluded that buccal infiltration injection without palatal injection can be an alternative technique instead of the conventional injection for MITMS.

• Structural Engineering and Mechanics
• /
• v.66 no.2
• /
• pp.217-227
• /
• 2018

In the last decades, valuable results have been reported regarding conventional passive, active, semi-active, and hybrid structural control systems on two-dimensional and a few three-dimensional shear buildings. In this research, using a three-dimensional finite element model of high-rise concrete structures, designed by performance based plastic design method, it was attempted to construct a relatively close to reality model of concrete structures equipped with Tuned Mass Damper (TMD) by considering the effect of soil-structure interaction (SSI), torsion effect, hysteresis behavior and cracking effect of concrete. In contrast to previous studies which have focused mainly on linearly designed structures, in this study, using performance-based plastic design (PBPD) design approach, nonlinear behavior of the structures was considered from the beginning of the design stage. Inelastic time history analysis on a detailed model of twenty-story concrete structure was performed under a far-field ground motion record set. The seismic responses of the structure by considering SSI effect are studied by eight main objective functions that are related to the performance of the structure, containing: lateral displacement, acceleration, inter-story drift, plastic energy dissipation, shear force, number of plastic hinges, local plastic energy and rotation of plastic hinges. The tuning problem of TMD based on tuned mass spectra is set by considering five of the eight previously described functions. Results reveal that the structural damage distribution range is retracted and inter-story drift distribution in height of the structure is more uniform. It is strongly suggested to consider the effect of SSI in structural design and analysis.

• Journal of KIISE:Computer Systems and Theory
• /
• v.28 no.12
• /
• pp.620-631
• /
• 2001

In interactive environments including computer games and virtual reality applications, we have increased need for interactive control of articulated body motions. Recently, physically based methods including constrained dynamics techniques are introduced to this area, in order to produce more realistic animation sequences. However, they are hard to achieve real-time control of articulated bodies, due to their heavy computations. In this paper, we present a procedural method for interactive animation of articulated bodies. In our method, each object of the constrained body is first moved according to their physical properties and external forces, without considering any constraints. Then, the locations of objects are adjusted to satisfy given constraints. Through adapting this two-stage approach, we have avoided the solving of large linear systems of equations, to finally achieve the interactive animation of articulated bodies. We also present a few example sequences of animations, which are interactively generated on PC platforms. This method can be easily applied to character animations in virtual environments.

• Journal of Digital Convergence
• /
• v.18 no.8
• /
• pp.459-467
• /
• 2020

From the perspective of the artist who produces modern ornaments, I wanted to see the future of modern ornaments in the hyperconnected era. I would like to find a practical way of converging information communication technology, which is one of them, and applying nfc tag among them. For the practical approach, after looking at the actual examples of commercial ring products using nfc tag technology, I tried to find a practical method that can be applied to modern ornaments produced in the workshop. As a result, two realistic alternatives were drawn: the investment method, which is free to converge, but has limited technical utilization, and an assembly method that requires high convergence from the design planning stage. After then, to know investment methods, have been produced that may have problems with real applications. I made a real sample, not a concept, to explain the technical factors and precautions necessary for applying nfc technology.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.1
• /
• pp.69-78
• /
• 2001

This paper presents the design and FPGA implementation of a FLEX PSP(Protocol Signal Processor) for the portable high speed paging system. In this approach, two algorithms are newly proposed for implementing the PSP which provides capabilities of the maximum 6,400bps at speed, high-channel throughput, real time error correction and an effective frame search function. One is an accurate symbol synchronization algorithm which is applied for synchronizing the interleaved 4-level bit symbols which are received at input stage of A/D converter, and the other is a modified fast decoding algorithm which is provided for realizing double error correction of (31,21)BCH signal. The PSP is composed of six functional modules, and each module is modelled in VHDL(VHSIC Hardware Description Language). Both functional simulation and logic synthesis have performed for the proposed PSP through the use of Synopsys$^{TM}$ tools on a Axil-320 Workstation, and where Altera 10K libraries are used for logic synthesis. From logic synthesis, we can see that the number of gates is about 2,631. For FPGA implementation, timing simulation is performed by using Altera MAX+ PLUS II, and its results will be also given. The PSP which is implemented in 6 FPGA devices on a PCB has been verified by means of Logic Analyzer.r.

• The Journal of Information Systems
• /
• v.23 no.1
• /
• pp.161-184
• /
• 2014

Our study measures the Digital Life Index (DLI) of baby boomers by considering the utilization of digital devices in their everyday life. The study was conducted by implementing the following three-step approach: (1) development of survey questions and data collection; (2) build Digital Life Index (DLI) model and lastly; (3) empirical analysis using the Digital Life Index (DLI). In the first stage in order to develop the survey questions to measure the digital index, two surveys were conducted. For the first preliminary survey, it was done based on the existing literatures which enabled this investigation through FGI analysis involving real professionals. The second survey was conducted by commissioning a specialized external firm. In this survey, a total of 400 data was collected to verify the validity and objectivity of the data sample. The data gathered through the survey questions was used to develop the digital index. Firstly, the appropriate factors were extracted by conducting factor analysis. This factor analysis validates and verifies the factors which are appropriate in measuring Digital Life Index (DLI). The derived factors are broadly divided into five main factors. The first factor describes the possession, purchase and use of digital device (x1). Meanwhile, the second factor describes the digital device's software (x2) and the third factor describes the participation in utilizing digital device (x3). The fourth factor describes the utilization of digital device in human personal relationship (x4) and lastly, the fifth factor describes the effect of digital device in everyday life and work environment (x5). Secondly, the digital index model was developed. The variables to represent the Digital Life Index (DLI) are ${\chi}1t,{\chi}2t,{\chi}3t,{\chi}4t$ and ${\chi}5t$. Furthermore, as experience in using the digital index grows overtime, the growth can be represented by the "S" shape. Based on the results, Digital Life Index(DLI) is distributed with the highest point at 90.3 and the lowest point at 25.9.