• Nuclear Engineering and Technology
• /
• v.49 no.5
• /
• pp.1044-1062
• /
• 2017

The construction project of the Kijang research reactor (KJRR), which is the second research reactor in Korea, has been launched. The KJRR was designed to use, for the first time, U-Mo fuel. Plate-type U-7 wt.% Mo/Al-5 wt.% Si, referred to as U-7Mo/Ale5Si, dispersion fuel with a uranium loading of $8.0gU/cm^3$, was selected to achieve higher fuel efficiency and performance than are possible when using $U_3Si_2/Al$ dispersion fuel. To qualify the U-Mo fuel in terms of plate geometry, the first miniplates [HANARO Miniplate (HAMP-1)], containing U-7Mo/Al-5Si dispersion fuel ($8gU/cm^3$), were fabricated at the Korea Atomic Energy Research Institute and recently irradiated at HANARO. The PIE (Post-irradiation Examination) results of the HAMP-1 irradiation test were analyzed in depth in order to verify the safe in-pile performance of the U-7Mo/Al-5Si dispersion fuel under the KJRR irradiation conditions. Nondestructive analyses included visual inspection, gamma spectrometric mapping, and two-dimensional measurements of the plate thickness and oxide thickness. Destructive PIE work was also carried out, focusing on characterization of the microstructural behavior using optical microscopy and scanning electron microscopy. Electron probe microanalysis was also used to measure the elemental concentrations in the interaction layer formed between the U-Mo kernels and the matrix. A blistering threshold test and a bending test were performed on the irradiated HAMP-1 miniplates that were saved from the destructive tests. Swelling evaluation of the U-Mo fuel was also conducted using two methods: plate thickness measurement and meat thickness measurement.

• Journal of Sericultural and Entomological Science
• /
• v.21 no.1
• /
• pp.36-44
• /
• 1979

Those studies were examined rearing two varieties on Japanese descent and two varieties of Chinese descent by feeding polluted mulberry leaves, non-polluted ones and water-cleaned ones respectively to find effects of air-pollution on the economic characters of silkworms and analysis of contents of Sulphur and Cadmium in the mulberry leaves and silkworms as followings; 1) Japanese descent of polluted part was delayed about 2.5 days than non-polluted part, Chinese descent was delayed about 4 days or inequal and water-cleaned part was medium in the silkworm larval duration. 2) Results of maximum weight of 5th instal, cocoon layer weight and cocoon weight were decreased in due order non-polluted, water-cleaned and polluted in the factors of mulberry 3) Pupal ratio of Japanese descent was not shown statistical significance, but Chinese descent was revealed it obviously in the factors of mulberry leaves. 4) In the resistance of polluted mulberry leaves, Chinese descent was feeble obviously than Japanese and there were some difference even through among the same varieties. 5) The content of S and Cd of polluted area mulberry leaves was increased about 30% respectively than non-polluted area. 6) The fed part of non-polluted mulberry leaves was S 0.41% and Cd 0.013 ppm water-cleaned part was S 0.47% and Cd 0.024 ppm and polluted part was S 0.52% and Cd 0.042 ppm in the contents of S and Cd of silkworm larvae. 7) The contents of S and Cd didn't make visible injury in mulberry leaves but made it seriously in silkworm larvae. 8) The injury of dust on mulberry leaves was more serious than that of quality of mulberry leaves by air-pollution in the economic characters of silkworm. 9) As above results, Chinese descent should avoid contaminated area and it rearing by water-cleaned mulberry leaves can get noticable results in inevitable case on selection of parents silkworm rearingzone.

• Journal of Korean Society of Forest Science
• /
• v.110 no.4
• /
• pp.577-589
• /
• 2021

Soil seed bank community contributes to the long-term conservation of plant diversity and vegetation dynamics, and their decreasing diversity and density with soil depth provide critical perspectives (deterministic and stochastic) for understanding the community disassembly process. We analyzed changes in species composition and diversity and structuring patterns by soil layer (top and bottom), including surface vegetation, in Gwangneung Forest, a mature forest with a vegetation climate in the temperate central part of the Korean Peninsula. From two layers of soil collected with a vertical difference of 10 cm, 934 specimens of 27 families, 40 genera, 44 species, three varieties, and 47 taxa, germinated. Although species diversity and germination density decreased in most comparative characteristics, including growth type, there was no statistical significance due to large deviations. Within-group variability of species composition was similar in the upper and lower soils, as was the decline pattern in co-occurred species (ζ-diversity) and change in species retention probability. The structuring process of the community composition in the two soil layers was fitted with an exponential correlation rather than a power function, demonstrating the dominance of the stochastic process. The pattern in diversity and species turnover according to soil depth in Gwangneung Forest was discovered to be structured by stochastic random events, such as seed vertical movement rather than interaction with trait characteristics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.319-325
• /
• 2018

The use of 3D printing (Additive Manufacturing) technology has expanded from initial model production to the mass production of parts in the industrial field based on the continuous research and development of materials and process technology. As a representative polymer material for 3D printing, the polyamide-based material, which is one of the high-strength engineering plastics, is used mainly for manufacturing parts for automobiles because of its light weight and durability. In this study, the specimens were fabricated using Selective Laser Sintering, which has excellent mechanical properties, and the flexural characteristics were analyzed according to the temperature of the two types of polyamide 12 and glass bead reinforced PA12 materials. The test specimens were prepared in the directions of $0^{\circ}$, $45^{\circ}$, and $90^{\circ}$ based on the work platform, and then subjected to a flexural test in three test temperature environments of $-25^{\circ}C$, $25^{\circ}C$, and $60^{\circ}C$. As a result, PA12 had the maximum flexural strength in the direction of $90^{\circ}$ at $-25^{\circ}C$ and $0^{\circ}$ at $25^{\circ}C$ and $60^{\circ}C$. The glass bead-reinforced PA12 exhibited maximum flexural strength values at all test temperatures in the $0^{\circ}$ fabrication direction. The tendency of the flexural strength changes of the two materials was different due to the influence of the plane direction of the lamination layer depending on the type of stress generated in the bending test.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.939-944
• /
• 2018

Clean fire extinguishing agents refer to chemical that can replace Halon 1211 and Halon 1310 according to the Montreal Protocol fermented to protect the Earth's ozone layer. In Korea and abroad, system standardization and performance evaluation of clean fire extinguishing agents are being carried out. This paper proposes an optimal nozzle shape by modeling and numerical analysis of various nozzle shapes based on general clean fire extinguishing system. The ejection speed of the nozzle can be improved by studying three - dimensional modeling of the nozzle for two shapes, Type A and B. Flow analysis was performed on the two types of nozzles and the gas velocity and pressure distribution were measured with different nozzle diameters. It was confirmed that the jetting speed was changed at the nozzle outlet according to the number and diameter of the nozzle holes. The flow rate increased with increasing the pressure regardless of the nozzle hole diameter. Based on the results obtained from the experiment, the K-factor value was deduced. Finally, a nozzle with a 12-hole structure with a 5-mm nozzle hole was proposed.

• Korean Chemical Engineering Research
• /
• v.56 no.6
• /
• pp.864-870
• /
• 2018

The effect of lower bed height on the collapse velocity was investigated for a two-stage bubbling fluidizedbed (0.1 m in diameter, 1.2 m high) connected with a standpipe (0.025 m in diameter) for solid transport. Air was used as fluidizing gas and mixture of coarse (< $1000{\mu}m$ in diameter and $3625kg/m^3$ in apparent density) and fine (< $147{\mu}m$ in diameter and $4079kg/m^3$ in apparent density) particles as solid particles. Mixing ratio of fine particles, height of the lower bed and the distributor of the upper bed were considered as experimental variables. The collapse velocity increased with static height of the lower bed. However, the effect decreased as the mixing ratio of fine particles increased. The effect seemed to be attributed to the increase in height of the dense layer of coarse particles that prevented the gas from flowing into the standpipe, not in pressure drop for the standpipe, as the bed height increased. The collapse velocity decreased a little as the pressure drop of the distributor of the upper bed increased. An improved correlation was proposed for predicting the collapse velocity.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.3
• /
• pp.62-77
• /
• 2011

Yi Sunsin's artifacts had been exhibited at Hyeonchungsa in Asan-si, Chungchungnam-do. These artifacts include Janggeom(Long swords), Okno(Jade ornament of Korea traditional hat), Yodae(Waist belt) and Dobae(Peach shaped wine cups) Gudae(Yodae's saucers). These were covered with dust and corroded due to long term display. Condition of these artifacts was examined for a re-opening of Yi Chungmugong Memorial Pavilion on 28 March 2011. Before conservation treatment of the artifacts, scientific analysis was conducted to identify the material of the artifacts. The result showed that the red paint on the hilt of the sword is composed of two layers. Pigments of two layers were found to be hematite and cinnabar mixed with red lead respectively. Mixed layer was assumed to have been applied recently. Also it was found that the blade of the sword was repainted using chrome yellow($PbCrO_4$). Considering the time limit, conservation treatment focused on stabilization of damaged area and prevention of futher risk during display.

• Journal of Digital Convergence
• /
• v.17 no.1
• /
• pp.209-217
• /
• 2019

In this paper, the purpose of this paper is to lay the foundation for the search system by using and building an online search engine suitable for the search domain and enabling search, conversion, integration and sharing of information. It is to use the ontology to infer hierarchical relationships, deduce objects based on that layer, and extract attributes to search areas that are relevant to the data that the user wants. In order to search for information in this way, the information search system was implemented by entering key words related to 'qualifications'. The implemented system arranged the meaning and relationship of each attribute online so that the general public can search information quickly, easily, and accurately. In addition, the implementation results were compared with two different search engines. Comparable search engines are Naver and Daum, the two major search engines. The search engine of this study, which was built using an ontology suitable for the search domain to perform searches using the semantic web, was evaluated to have excellent results. However, it is thought that a more formalized online location is necessary to increase the accuracy and reliability of search engines and to include more comprehensive categories of search terms.

• Journal of Environmental Health Sciences
• /
• v.47 no.3
• /
• pp.267-278
• /
• 2021

Objectives: Using atmospheric dispersion representative models (AERMOD and CALPUFF), the emissions characteristics of each model were compared and analyzed in ready-mixed concrete manufacturing facilities that generate a large amount of particulate matter (PM-10, PM-2.5). Methods: The target facilities were the ready-mixed concrete manufacturing facilities (Siheung RMC, Goyang RMC, Ganggin RMC) and modeling for each facility was performed by dividing it into construction and operation times. The predicted points for each target facility were selected as 8-12ea (Siheung RMC 10, Goyang RMC 8, and Gangjin RMC 12ea) based on an area within a two-kilometer radius of each project district. The terrain input data was SRTM-3 (January-December 2019). The meteorological input data was divided into surface weather and upper layer weather data, and weather data near the same facility as the target facility was used. The predicted results were presented as a 24-hour average concentration and an annual average concentration. Results: First, overall, CALPUFF showed a tendency to predict higher concentrations than AERMOD. Second, there was almost no difference in the concentration between the two models in non-complex terrain such as in mountainous areas, but in complex terrain, CALPUFF predicted higher concentrations than AERMOD. This is believed to be because CALPUFF better reflected topographic characteristics. Third, both CALPUFF and AERMOD predicted lower concentrations during operation (85.2-99.7%) than during construction, and annual average concentrations (76.4-99.9%) lower than those at 24 hours. Fourth, in the ready-mixed concrete manufacturing facility, PM-10 concentration (about 40 ㎍/m³) was predicted to be higher than PM-2.5 (about 24 ㎍/m³). Conclusions: In complex terrain such as mountainous areas, CALPUFF predicted higher concentrations than AERMOD, which is thought to be because CALPUFF better reflected topographic characteristics. In the future, it is recommended that CALPUFF be used in complex terrain and AERMOD be used in other areas to save modeling time. In a ready-mixed concrete facility, PM-10, which has a relatively large particle size, is generated more than PM-2.5 due to the raw materials used and manufacturing characteristics.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.2
• /
• pp.29-37
• /
• 2021

The effect of Ar/N₂ two-step plasma treatment on the quantitative interfacial adhesion energy of low temperature Cu-Cu bonding interface were systematically investigated. X-ray photoelectron spectroscopy analysis showed that Ar/N₂ 2-step plasma treatment has less copper oxide due to the formation of an effective Cu4N passivation layer. Quantitative measurements of interfacial adhesion energy of Cu-Cu bonding interface with Ar/N₂ 2-step plasma treatment were performed using a double cantilever beam (DCB) and 4-point bending (4-PB) test, where the measured values were 1.63±0.24 J/m² and 2.33±0.67 J/m², respectively. This can be explained by the increased interfacial adhesion energy according phase angle due to the effect of the higher interface roughness of 4-PB test than that of DCB test.