• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2000년도 추계학술대회
• /
• pp.81-84
• /
• 2000

Two-layer aquifer system with fractional flow dimension is composed of contiguous two layers: Layer 1 (lower layer) and Layer 2 (upper layer) with different permeability and specific storage each other. For this aquifer system, we assume that groundwater flow originates only from Layer 1 on the pumping well. The aquifer system considers wellbore storage and skin effects on the pumping well. Dimensionless drawdown curves for different flow dimensions are analyzed for different lambda (λ, crossflow coefficient) values, kappa ($textsc{k}$, permeability ratio between Layer 1 and Layer 2) values and omega ($\omega$, storativity ratio between Layer 1 and Layer 2) values. The curves for Layer 1 and Layer 2 show characteristic trend each other.

• 한국수자원학회논문집
• /
• 제43권9호
• /
• pp.823-833
• /
• 2010

침수식생 개수로 흐름은 식생영역과 상부영역에 서로 다른 흐름구조를 보인다. 즉, 식생영역에서 전단으로 인해 생성되는 난류는 억제되며 비교적 균일한 유속 분포를 보이며 상부영역에서는 일반 개수로 흐름과 유사한 흐름구조를 보인다. 이와 같이 두 상이한흐름구조가 결합된 복잡한 흐름특성으로 인해 침수식생 개수로흐름은 공학적인 관심의 대상이 되어왔다. 본 연구에서는 침수식생 개수로 흐름의 층적분 모형의 비교 분석을 수행하였다. 일반적으로 식생흐름의 층적분 모형은 층의 수에 따라 2층 및 3층모형으로 구분한다. 즉, 전체 수심을 식생영역과 상부영역으로 구분하는 2층모형과 식생영역을 바닥 조도의 영향 유무에 따라 내부 및 외부 식생영역으로 구분하는 3층모형으로 분류된다. 본 연구에서는 2층모형과 3층모형을 비교하였다. 다양한 실험조건에 적용한 결과, 3층모형이 식생영역에서 유속의 변화를 고려할 수 있으나 결과는 레이놀즈응력 분포에 민감하며, 적분된 유속은 2층모형에 의한 예측 결과가 더욱 정확한 것으로 나타났다. 3층모형에서 내부 식생영역의 결과가 전체 흐름구조에 미치는 영향이 무시할 수 있으므로 이 점을 착안하여 식생영역에서 유속 변화가 고려되는 수정 2층모형을 제시하였다. 수정 2층모형에서 가정하는 레이놀즈응력 분포는 상부영역에서는 선형, 식생영역에서는 멱함수 형으로 변화한다. 다양한 조건에 적용한 결과, 수정 2층모형이 대체로 기존의 모형과 비슷한 정도의 예측을 수행하나 식생밀도가 매우 작은 흐름의 경우 예측 결과가 불량한 것으로 나타났다.

• 펄프종이기술
• /
• 제30권2호
• /
• pp.5-12
• /
• 1998

Exploitation of the papermaking technology to reduce the strength loss that accompanies when using recycled papers as raw materials for papermaking is one of the most important issues imposed upon today's paper industry. Multi-layer sheet forming technology has been suggested as a way that provides some answers to this issue. In this study strength properties of single- and two-layer handsheets formed with recycled fiber and unbleached softwood kraft pulp have been examined to quantify the benefits when using two-layer sheet forming technology rather than a conventional single layer sheet forming precess. Single- and two-layer handsheets were made from 50% of OCC and 50% of Sw-UKP and their strength properties were evaluated. Also the strength properties made from Sw-UKP and OCC sheets were determined. A multihead, which can be attached on the top of hand- sheet former, was used to form two-layer sheets. Maximum strength properties could be obtained in the freeness range of 500∼300mL CSF for Sw-UKP Most of the strength properties was reduced by 30∼35% when 50% OCC was blended with UKP. Decrease of strength properties, however, could be reduced by employing a two-layer sheet forming method. Creator strengths could be obtained when UKP was positioned at the top layer of two layered sheets indicating greater UKP fines retention due to the filtration effect of the OCC layer formed prior to UKP layer contributed the strength improvement. Two-layer sheet showed lower Scott internal bond strength than single layer sheet. By incorporating some of UKP fibers into OCC layer this reduction could be reduced.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권1호
• /
• pp.261-279
• /
• 2023

In this article, the uplink achievable rate is investigated for massive multiple-input multiple-output (MIMO) under correlated Ricean fading channel, where each base station (BS) and user are both deployed multiple antennas. Considering the availability of prior knowledge at BS, two different channel estimation approaches are adopted with and without prior knowledge. Based on these channel estimations, a two-layer decoding scheme is adopted with maximum ratio precoding as the first layer decoder and optimal second layer precoding in the second layer. Based on two aforementioned channel estimations and two-layer decoding scheme, the exact closed form expressions for uplink achievable rates are computed with and without prior knowledge, respectively. These derived expressions enable us to analyze the impacts of line-of-sight (LoS) component, two-layer decoding, data transmit power, pilot contamination, and spatially correlated Ricean fading. Then, numerical results illustrate that the system with spatially correlated Ricean fading channel is superior in terms of uplink achievable rate. Besides, it reveals that compared with the single-layer decoding, the two-layer decoding scheme can significantly improve the uplink achievable rate performance.

• 한국도로학회논문집
• /
• 제19권6호
• /
• pp.1-11
• /
• 2017

PURPOSES : The purpose of this study is to compare noise reduction quantities between before/after two-layer low noise pavement implementation using equivalent noise level analysis and to analyze the noise reduction effects of the two layer low noise pavement with a statistical method such as the Anderson-Darling Test. METHODS : In order to compare and to analyze noise reduction effects between before/after two-layer low noise pavement implementation, data acquisition as noise levels on a roadside and an apartment rooftop was conducted in the study area. The equivalent noise level was estimated in order to compare noise reduction quantities and the Anderson-Darling Test was carried out for estimating noise reduction effects of the two-layer low noise pavement. RESULTS : The equivalent noise levels of before/after two-layer low noise pavement implementation for the roadside during the daytime are 65.355 dB and 63.520 dB and during the nighttime are 62.463 dB and 59.088 dB. The equivalent noise levels for the apartment rooftop during daytime are 57.301 dB and 59.088 dB and during the nighttime are 54.616 dB and 52.464 dB. Also two-layer low noise pavement decreased the noise reduction effects estimated with the statistical method as the Anderson-Darling test for the roadside during the daytime by around 66.68% and decreased noise reduction effects on the roadside during the nighttime by 0.70%. Moreover it reduced noise reduction effects in the apartment rooftop during the daytime and nighttime by 0% and 96.32%, respectively. CONCLUSIONS : Based on the result of this study, two-layer low noise pavement can positively affect noise reduction during both the daytime and nighttime according to the results of estimating the equivalent noise levels and the Anderson-Darling test.

• 대한전자공학회논문지SP
• /
• 제41권3호
• /
• pp.59-72
• /
• 2004

본 논문에서는 워터마크를 훼손할 수 있는 다양한 공격을 크게 파형 공격과 동기 공격으로 구분하고 두 부류의 공격에 대해 특화된 방어를 수행하기 위한 2-계층 워터마킹 기법을 제안한다. 제안된 방법은 동기 공격에 대한 방어를 위한 동기층(synchronization layer)과 일반적인 파형 공격에 대한 표시층(marking layer)의 2-계층으로 구성된다. 동기층에서는 다양한 공격에 대해서도 일정하게 선택되는 목표 영역을 선정하고, 표시층에서는 해당 영역에 대역-확산에 기반을 둔 방식으로 워터마크를 삽입한다. 이러한 2-계층 워터마킹 기법을 사용함으로써 기존의 원본 영상을 사용하지 않는 워터마킹 기법이 가지는 이동, 회전과 같은 기하학적인 공격에 보이는 문제점을 해결할 수 있게 된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.550-552
• /
• 2003

We prepared $Co_{77}Cr_{20}Ta_3$ Magnetic layer for perpendicular magnetic recording media with introduce Two-step methode and Amorphous Si Underlayer on slide glass substrate. The thickness of magnetic layer were 100nm, and Underlayer were varied from 5 to 100 nm. The multi layer Properties of crystal structure were examined with XRD. Prepared thin films showed improvement of dispersion angle of c-axis orientation ${\Delta}{\theta}_{50}$ caused by inserting Buffer-layer and amorphous Si underlayer.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1995년도 학술대회
• /
• pp.97-100
• /
• 1995

In transmission of image sequences over ATM networks, the packet loss problem and channel sharing efficiency are important. As a possible solution two-layer video coding methods have been proposed. These methods transmit video information over the network with different levels of protection with respect to packets loss. In this paper, a two-layer coding method using pyramid structure is proposed and several realizations of two-layer video coding methods are presented and their performances are compared.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.333-336
• /
• 2006

A new forming method for metal/ other metal two-layer tubes by multi-billet extrusion (MBE) is introduced. The forming possibilities of two-layer tubes CDA 365(inner)/Al 1100(outer) and Al 2014(inner)/Al 1100(outer) by MBE are investigated according to the given frictional condition and die profile. The results show that two-layer tube composed by two types tube as abovementioned can be manufactured by MBE. Some stated variables in the forming process such as effective stress and normalized pressure at welding surface are analyzed by FEM code ($DEFORM^{TM}$-3D)

• Computers and Concrete
• /
• 제33권1호
• /
• pp.13-25
• /
• 2024

In this study, contact analysis in a functionally graded (FG) layer loaded with two circular punches is solved using the finite element method (FEM). The problem is consisted of a functionally graded layer that resting on an elastic semi-infinite plane and is loaded with two rigid punches of circular geometry. External loads P and Q are transferred to the layer via two rigid punches. The finite element model of the functionally graded layer is created using the ANSYS package program and a 2-dimensional analysis of the problem is analyzed. The contact lengths, obtained as a result of the analysis are compared with the analytical solution in the literature. In the study, the effects of parameters such as distances between punches, loads, inhomogenity parameter on contact zones, initial separation loads and distances, normal stresses, stresses across depth and contact stresses are investigated. As a result, in this study, it can be said that the magnitude of the stresses occurring in the FG layer is less than the homogeneous layer, therefore the life of FG materials will be longer than the homogeneous layer. When the distance between the punches is 2.25, the initial separation distance is 6.98, and when the distance between the punches is 4, the initial separation distance decreases to 6.10. In addition, when the load increased in the second punch, the initial separation load decreased from 55 to 18. The obtained results are presented in the form of graphs and tables.