• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.957-963
• /
• 2014

Converter transformers play important roles in high-voltage direct current transmission systems. This paper presents experimental and analysis results of the combined electrical and thermal aging of oil-impregnated paper at pulsating DC voltages. Breakdown voltages and time-to-breakdown of oil-paper specimens were measured by using short-time and constant-stress tests. The breakdown characteristics of combined electrical and thermal aging on insulation system were discussed. According to the relationship between failure time and aging temperature, the two-parameter Weibull model was improved. On the basis of the competing risk algorithm and the improved Weibull model, the two factors failure model was calculated. And the influence of temperature in the insulation system has been analyzed. This model performs better than the two-parameter Weibull model when both time and temperature are considered as variables in estimating the lifetime of oil-paper insulation.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.2
• /
• pp.241-247
• /
• 2015

The purpose of the warranty data analysis can be classified into two categories. Two goals is a failure cause analysis and life prediction analysis. In this paper first, we applied multivariate analysis method that can be estimated in consideration of various factors on the failure cause warranty data. In particular, we apply the Tree model and Cox model. The advantage of the Tree is easy to interpret this result as compared to other models. In addition Cox model can quantitatively express the risk. Second, this paper proposed a multivariate life prediction model (AFT) considering a variety of factors. By applying the actual warranty data confirmed the usability.

• Journal of Korean Institute of Industrial Engineers
• /
• v.36 no.1
• /
• pp.69-77
• /
• 2010

The failure rate model of External Environment Maintenance(EEM) for a system under severe environment is investigated. EEM, which is recently introduced concept, is a maintenance activity controlling external environment factors that potentially cause system failure such as cleaning equipment, controlling temperature (humidity) and removing dust inside of electronic appliances. EEM can not have any influence on the inherent failure rate of a system but reduce the severity of the external environment causing failure since it deals with only external environment factors. Therefore, we propose two failure rate models to express the improvement effect of EEM: The intensity reduction model and age reduction model. The intensity and age reduction models of EEM are developed assuming the quality of improvement effect is proportioned to an extra intensity or age respectively. The validation of proposed failure rate models is performed in order of data generation, parameter estimation and test for goodness-of-fit.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.12
• /
• pp.843-846
• /
• 2015

In this paper, the failure mechanism of PTC heater were examined closely by failure analysis and based on it, accelerated life test were conducted. Finally, life distribution and acceleration model were established. The failure mechanism of PTC heater such as crack, increase of resistance due to heating were identified. Two acceleration factors such as temperature, humidity were chosen with two levels each and accelerated life test were done. Life distribution were identified as Weibull distribution with shape parameter 5.4 and Temperature-Humidity model was fitted as an acceleration model.

• Journal of Korean Society for Quality Management
• /
• v.17 no.2
• /
• pp.17-26
• /
• 1989

This paper is concerned with forecasting the existing number of errors in the computer software and optimizing the stopping time of the software test based upon the forecasted number of errors. The most commonly used models have assessed software reliability under the assumption that the software failure late is proportional to the current fault content of the software but invariant to time since software faults are independents of others and equally likely to cause a failure during testing. In practice, it has been observed that in many situations, the failure rate decrease. Hence, this paper proposes a mathematical model to describe testing situations where the failure rate of software limearly decreases proportional to testing time. The least square method is used to estimate parameters of the mathematical model. A cost model to optimize the software testing time is also proposed. In this cost mode two cost factors are considered. The first cost is to test execution cost directly proportional to test time and the second cost is the failure cost incurred after delivery of the software to user. The failure cost is assumed to be proportional to the number of errors remained in the software at the test stopping time. The optimal stopping time is determined to minimize the total cost, which is the sum of test execution cast and the failure cost. A numerical example is solved to illustrate the proposed procedure.

• Geomechanics and Engineering
• /
• v.20 no.3
• /
• pp.175-189
• /
• 2020

A set of relatively simple five local shear and tension failure variables is presented and then implemented into a generalized poroelastic hydromechanical numerical model to analyze failure potential and stability of variably saturated geologic media. These five local shear and tension failure variables are formulated from geometrical relationships between the Mohr circle and the Mohr-Coulomb failure criterion superimposed with the tension cutoff, which approximate together the Mohr effective stress failure envelope. Finally, fully coupled groundwater flow and land deformation in two variably saturated geologic media, which are associated with a slope (Case 1) and a tunnel (Case 2), respectively, and their failure potential and stability are simulated using the resultant hydromechanical numerical model. The numerical simulation results of both cases show that shear and tension failure potential and stability of variably saturated geologic media can be analyzed numerically simply and efficiently and even better by using the five local shear and tension failure variables as a set than by using the conventional factors of safety against shear and tension failures only.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1259-1264
• /
• 2008

This paper presents an accelerated life test for burn out of tungsten filament of automotive halogen lamp. There are many failure modes and failure factors that associated with tungsten filament. But in this explain the dominant failure mode of tungsten filament is the bumout of the filament failure. At first, over voltage, high temperature, inrush current and vibration are selected as stress factors by using of two stage Quality Function Deploymeng(QFD). And we planed accelerated life test that has one factor(voltage) and three levels. By experiment it has absorbed that over voltage has an effect on the life of halogen lamp. Using ALTA programs, we estimated the common shpae parament of Weibull distribution, life-stress relationship and $B_{100p}$ life.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.2
• /
• pp.119-128
• /
• 2016

Use of ICT in Government has ability to improve service delivery to its citizens, and yet many developing countries have lagged behind in the implementation of e-Government. Many e-Government initiatives also failed to achieve their objectives in developing countries. This paper therefore aims to identify critical failure or success factors in Kenya, using Heeks' Factor Model. A survey questionnaire was developed and data were collected and analyzed from officials and interested citizens. The analysis results enabled to highlight seven specific success and failure factors, and their constituent elements in Kenya. The Kenyan overall e-Government implementation score belongs to the Zone of Improvement (3.52 of total 5.0), which means partial success or failure. The enablers of e-Government projects are good strategy formulation, and internal and external drive, whereas main failures of e-Government are weak ICT infrastructure. The areas for improvement are project management, design, competencies and funding. Data analysis highlights both strengths and weaknesses for each factor or variable. In particular, Kenyan government excels at the drive for change by top to bottom government officers as well as external stakeholders, while the government officers who are using e-Government are satisfied with the availability of vision, strategy and plan of e-Government implementation. Both technologies and e-transactions laws were the worst of all the variables in e-Government implementation. Two areas should be improved using immediate corrective action. In-depth study reveals that government officers and citizens can't fully use their laptop and mobile devices due to the lack of both ICT network and its operating technology, and legal system associated with the transaction of business information. Finally, the study ends up with recommendations for policy makers to shape the future of e-Government system in both developing and developed countries.

• Knowledge Management Research
• /
• v.16 no.1
• /
• pp.71-93
• /
• 2015

With the rapid growth of the internet, electronic commerce has become accepted as one of the major purchasing channels for consumers. As more and more consumers search for and purchase products through the internet, intra-industry competition of electronic commerce has become fierce. Therefore, electronic commerce service providers pay attention to factors that prevent existing customers from leaving there services in the service failure situation. In this regard, electronic commerce service providers should make service recovery efforts for consumer recovery satisfaction after service failure. In this study, we suggest that procedural justice, interactional justice, distributive justice and authenticity have positive impacts on recovery satisfaction. In addition, we also propose that involvement plays moderating roles in the relationships between procedural justice, interactional justice, distributive justice, authenticity and recovery satisfaction. We collected empirical data for this study over a period of two weeks from subjects who had service failure recovery experiences through electronic commerce. A total of 224 complete and valid responses were obtained. We carried out data analysis using a two-step methodology with SPSS 20.0 and SmartPLS 2.0. The first step in the data analysis was to establish the internal consistency, convergent validity, discriminant validity of the constructs. In the second step, we examined the structural model. The empirical results support the proposed model and partly identify the moderating effect of involvement differences. The moderate effect results show that procedural justice, distributive justice and authenticity have different impacts on recovery satisfaction in two groups. Cognitive factor such as the procedural justice and distributive justice have stronger impacts on recovery satisfaction in the high-involvement goods than in the low-involvement goods, while emotional factor such as authenticity has a stronger impact on recovery satisfaction in the low-involvement goods than in the high-involvement goods. We expect that this result will provide researchers and managers who are interested in electronic commerce service failure recovery with useful theoretical and practical implications.

• Journal of Applied Reliability
• /
• v.16 no.4
• /
• pp.305-312
• /
• 2016

Purpose: The purpose of this study is to provide a sensitivity analysis of system reliability for recognizing effectiveness of changing of BD mode failures using reliability growth projection model based on NHPP. Methods: Crow extended reliability projection model (CERPM) is used to analyze the changing of two factors 1) the number of BD mode failures, 2) fix effectiveness factor (FEF) values. Results: The system reliability has increased in accordance with the number of BD mode failures and FEF values have increased. Conclusion: It is necessary to design failure modes and FEF values to supervise the reliability.