• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 추계학술대회논문집
• /
• pp.121-128
• /
• 2009

During a hypothetical high-pressure accident in a nuclear power plant (NPP), molten corium can be ejected through a breach of a reactor pressure vessel (RPV) and dispersed by a following jet of a high-pressure steam in the RPV. The dispersed corium is fragmented into smaller droplets in a reactor cavity of the NPP by the steam jet and released into other compartments of the NPP by a overpressure in the cavity. The fragments of the corium transfer thermal energy to the ambient air in the containment or interact chemically with steam and generate hydrogen which may be burnt in the containment. The thermal loads from the ejected molten corium on the containment which is called direct containment heating (DCH) can threaten the integrity of the containment. DCH in a NPP containment is related to many physical phenomena such as multi-phase hydrodynamics, thermodynamics and chemical process. In the evaluation of the DCH load, the melt dispersion rates depending on the RPV pressure are the most important parameter. Mostly, DCH was evaluated by using lumped-analysis codes with some correlations obtained from experiments for the dispersion rates. In this study, MC3D code was used to evaluate the dispersion rates in the APR1400 NPP during the high-pressure accidents. MC3D is a two-phase analysis code based on Eulerian four-fields for melt jet, melt droplets, gas and water. The dispersion rates of the corium melt depending on the RPV pressure were obtained from the MC3D analyses and the values specific to the APR1400 cavity geometry were compared to a currently available correlation.

• 한국미생물·생명공학회지
• /
• 제14권6호
• /
• pp.473-478
• /
• 1986

미생물에 의한 천연유지의 분해자화과정을 극명함으로써 값싼 유지를 발효원으로서 착용하기 위하여 팜유자화성 유용균주인 Torulopsis candida Y-128과 Acinetobacter calcoaceticus KB-2가 생산하는 리파제의 특성과 이들 균주의 생리적인 특성을 검토하였다. T. candida Y-128은 팜유입자에 부착·자화하며 리파제의 작용에 의해 유리되는 분포화지방산을 포화지방산에 비해 쉽게 자화이용 함으로써 균체증식이 이루어지고 있었다. T. candida Y-128의 리파제는 대부분 균체내에 존재하는데 비해, A calcoaceticus KB-2는 배양시에 균체증식 대수기부터 균체외로 리파제가 생성됨을 알수 있었으며, 리파제에 의해 유리된 포화 지방산도 다른 균주에 비해 자화이용이 용이함을 알 수 있었다. 두 균주는 배양액중에 리파제를 축적하지 않고 균체생육에 필요한 정도를 생산하며 천연중지중 1(3-)-위치의 지방산에 작용하는 위치특이성을 나타내었다. 따라서 두 균주는 천연유지입자에 부착하여 1(3-)- 위치의 지방산을 분해하고, 분해생성물은 지방산대사경로를 거쳐 자화이용되는 것으로 보여진다.

• Applied Microscopy
• /
• 제47권3호
• /
• pp.176-186
• /
• 2017

Two-dimensional (2D) materials have been studied widely owing to their outstanding properties since monolayer graphene was isolated in 2004. Especially, among 2D materials, phosphorene, a single atomic layer of black phosphorus (BP), has been highlighted for its electrical properties. This material can serve as a substitute for graphene, which has been revealed as a "semi-metal", in next-generation semiconductors. However, few-layer BP is prone to degradation under ambient conditions owing to its reactivity with oxygen and water, which results in the condensation of water droplets on the surface of the BP flakes. This causes charge transfer from the phosphorus atom to oxygen, resulting in the formation of phosphoric acid (oxide) and degrades the various properties of BP. Therefore, it is necessary to find passivation methods to prevent BP flakes from being degraded under ambient conditions. This review article deals with recent studies on passivation methods for BP and their performance against oxygen and water, effects on the electrical properties of BP, and the extent to how they protect BP.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제22회 KOSCI SYMPOSIUM 논문집
• /
• pp.119-126
• /
• 2001

The effects of injection pressure and the distance between injectors on the droplet distribution characteristics of liquid spray for dual orifice type swirl injectors were experimentally investigated. The SMD distributions, volume concentration and Rosin- Rammler variation N of liquid spray droplets for water and a fuel were measured by using the laser diffraction particle sizer. The results of present study show that SMD decreases and spray angle increases as the injection pressure increases. The interaction of sprays from two injectors gives more uniform SMD distribution in the radial direction. As the distance between two injectors increases, SMD that is measured in the interacting region increases. The effect of viscosity on the droplet distribution in the interacting region is greater than the that of surface tension of liquid.

• 설비공학논문집
• /
• 제4권2호
• /
• pp.65-71
• /
• 1992

In most absorption machines, absorption enhancement has been achieved by adding small amount of surfactant additive, which introduced the surface tension difference between absorbent and surfactant droplets in the vapor absorption. The aim of this study is to understand a basic mechanism of Marangoni convection and its effectiveness in the vapor absorption enhancement. In this study, nonflowing aqueous solution of LiBr 60 mass% was exposed to saturated water vapor under the condition that two dropwises surfactant were fixed on the absorbent surface. Our experiments achieved to visualize the enhanced heat and mass transfer phenomena by the effect of Marangoni convection through the laser holographic interferometry. Also, Marangoni convection behavior was obtained by using tracer method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.558-561
• /
• 2005

In-situ photopolymerization of alkyl acrylate monomers in the presence of a nematic fluid provides a cellular matrix of liquid crystalline droplets in which the chemical structure of the encapsulating polymer exerts control over the alignment (anchoring) of the liquid crystalline molecules. Control is obtained by variation of the alkyl side chains and through copolymerization of two dissimilar monofunctional acrylates. Two monofunctional acrylates with opposing tendencies on copolymerization provide control over the tunability of anchoring over a wide temperature range. Using various acrylates we show that a uniform vertical alignment can be achieved over a large area. Utilizing this technique and a nematic with negative dielectric anisotropy, we have fabricated highly flexible liquid crytal based devices, with high contrast and fast response time, without using any alignment layer.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.449-452
• /
• 2004

“Flameless combustion” of lean to ultra lean mixtures, supported by high-temperature burned gas, can resolve the dilemma between complete combustion versus ultra-low NOx emissions in gas turbine combustors. The characteristics of NOx emissions and combustion in “lean-lean” two-stage combustion were investigated for fuel vapor and droplets / air mixture jets injected from the main injection tube that was placed perpendicular to the combustor wall into the primary hot burned gas prepared by combustion of lean mixtures on a perforated flame holder. The present results clearly show that the ultra-low NOx combustion supported by the reaction of lean mixtures well mixed with the hot burned gas from the primary stage is much more advantageous in achieving ultra-low NOx emissions while maintaining high combustion efficiency.

• 대한기계학회논문집
• /
• 제8권3호
• /
• pp.201-209
• /
• 1984

본 연구는 Kim과 Chiu가 사용한 연속체 관점에서 유도된 액체-기체상의 2상유 동모델(Two Phase Flow:TPF)을 이용하여 초기 집단연소수(group combustion number)의 크기, 즉 액적들의 초기 분포상태에 따른 연소상태를 예측 분류한다. 또한 이때 예 측된 대표적인 연소상태에서 형성되는 화염의 성질을 비교 검토한다.

• 청정기술
• /
• 제21권3호
• /
• pp.191-199
• /
• 2015

선박용 디젤엔진에서 배출되는 황산화물(SO_x)은 건강과 자연에 대해 악영향을 끼친다. 선박운항이 많은 지역별로 전 세계 곳곳에서는 황산화물 배출규제지역(SECA)을 설정하여 엄격한 배출규제를 설정하여 관리를 강화하고 있는 데 선박으로부터 배출되는 황산화물을 줄이기 위한 방법으로 습식스크러버(wet scrubber)의 적용이 확대되고 있다. 본 연구에서는 분무형 습식스크러버의 유동 내부에서 이루어지는 액체의 운동을 모사하기 위한 수치적 모델을 구성하여 전산유동역학적 방법을 이용하여 액적의 거동을 해석하였다. 실제 습식스크러버 적용 시 문제가 되는 액적의 캐리오버(carry over) 문제를 개선하기 위한 방법을 모색하는 것을 특별주제로 하여 스크러버의 배기부에 굽은 판형 액적제거기(wave plate mist eliminator)를 설치하여 액적의 캐리오버 감소효과를 검토하였다. 전산해석은 총 두 단계로 이루어졌는데, 1차적으로 액적제거기가 없는 기본 스크러버에 대해서 해석을 실시하여 스크러버에서 배출되는 기본적인 캐리오버 양을 확인하고, 다음으로 액적제거기를 부착하여 개선효과를 계산하고 비교하였다. 해석결과, 기본형상에서 비산되는 액적은 제안된 분포의 액적 양의 42.0%가 출구로 비산되었으며, 액적 제거기를 설치한 후에는 비산되는 액적은 제안된 분포의 액적 양의 3.4%로 감소함으로서 액적 제거기의 설치로 인해 비산되는 액적이 감소효과를 확인할 수 있었다.

• 공업화학
• /
• 제4권3호
• /
• pp.537-543
• /
• 1993

N-헥산과 증류수로 이루어진 비혼화성 액상계에서 교반에 의한 액-액분산을 해석하였다. 교반기는 blade형태가 flat, 60mesh와 40mesh의 금망, 그리고 60mesh금망의 외부에 금속띠를 두른 4가지의 6-bladed turbine 교반기를 사용하였다. 실험결과, 동일한 교반속도에서 유기상의 분산정도와 교반기의 소요동력은 blade형태가 flat>solid edged>60mesh>40mesh의 순서이었으며 유기상의 부피비가 증가할수록 완전분산에 필요한 최소교반속도가 증가되었다. 또한 분산상의 액적의 평균직경은 교반속도의 증가에 따라 감소하였으며 동일한 교반속도에서는 Solid edged$d_{32}$)은 다음과 같이 유기상의 부피비(${\phi}$)와 Weber number($N_{We}$)의 함수로 나타낼 수 있었다.$d_{32}/D=a(1+b{\phi})N_{We}{^{-0.6}}$.