• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.117-124
• /
• 2000

This paper presents the construction planning and the detail design of a 16.2 km long railroad tunnel in a mountainous area. Major design conditions for railroad are the single track, loop-typed alinement, and a maximum grade of 24.5$\textperthousand$. A underground station(double track) with a length of 1.1km is located in the middle of the line for train cross-passing. Tunnel is excavated in highly complex geological conditions including faulted areas, abandoned mine works areas, and various rock types such as sandstone, shale, limestone, and coal seam partly. Drilling and blasting method was adopted because it is more flexible than TBM(Tunnel Boring Machine) as a result of risk assessment for geological conditions in this area. Two working adits were planned to adjust the construction schedule and can be used for ventilation and maintenance in operation phase. New material and concept were introduced to the tunnel drain design. They are expected to improve tunnel drain condition and capability. Rational tunnel support design was tried to consider the various tunnel size and purpose and to use the geological investigation results.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.2 no.3
• /
• pp.171-176
• /
• 2010

This paper proposes the application of sensor technology to assemble ship blocks efficiently. A sensor-based monitoring system is designed and implemented to improve shipbuilding productivity by reducing the labor cost for the adjustment of adequate positioning between ship blocks during pre-erection or erection stage. For the real-time remote monitoring of relative distances between two ship blocks, sensor nodes are applied to measure the distances between corresponding target points on the blocks. Highly precise positioning data can be transferred to a monitoring server via wireless network, and analyzed to support the decision making which needs to determine the next construction process; further adjustment or seam welding between the ship blocks. The developed system is expected to put to practical use, and increase the productivity during ship blocks assembly.

• Proceedings of the KWS Conference
• /
• 2006.05a
• /
• pp.148-150
• /
• 2006

In this paper, the applicability of an UET(ultrasound excited thermography) for a defect detection of the welded receptacle is described. An UET(ultrasound excited thermography) is a defect-selective and fast imaging tool for damage detection. A high power ultrasound-excited vibration energy with pulse durations of 280ms is injected into the outer surface of the welded receptacle made of Al material. An ultrasound vibration energy sent into the welded receptacle propagate inside the sample until they are converted into the heat in the vicinity of the defect. The injection of the ultrasound excited vibration energy results in heat generation so that the defect is turned into a local thermal wave transmitter. Its local heat emission is monitored by the thermal infrared camera. And they are processed by the image recording system. Measurement was performed on aluminum receptacle welded by using Nd:YAG laser. The observed thermal image revealed two area of defects along the welded seam.

• Journal of the Korean Vacuum Society
• /
• v.4 no.S1
• /
• pp.130-137
• /
• 1995

Deopsition of thermal quality SiO2 using a high density plasma ECR CVD process has been demonstrated to give void and seam free gap fill of high aspect ratio metallization structures with a simple oxygen-silane chemistry. This is achieved by continuous sputter etching of the film during the deposition process. A two-step process is utilized to deposit a composite layer for higher manufacturing efficiency. The first step, which has a deposition rate of approximately 0.5 $\mu$m/min., is used to provide complete gap fill between the metal lines. The second step, which has a deposition rate of up to 1.5 $\mu$m/min., is used to deposit a total thickness of 2.0$\mu$m for the intermetal dielectric film. The topography of this composite film is very compatible with subsequent chemicl mechanical polishing(CMP) planarization processing.

• Journal of Welding and Joining
• /
• v.14 no.6
• /
• pp.68-80
• /
• 1996

When a workpiece is to be arc welded around the outside corner, continuous welding without welding seam in the neighborhood of comer still remains a very difficult technique. Skilled welders weld comers by delicate“hand-eye coordination”while turning the workpiece manually, However, there is not a very clear solution to this problem in robotized arc welding process. In order to solve this problem, the coordination of a robot and a positioner with one or two axes is necessary. This paper presents a method of continuous welding around the corner of workpiece using the coordinated motion of a robot and a positioner. The positioner is either revolute jointed or prismatic jointed. In this paper, a clothoid curve is chosen for welding trajectory. The clothoid curve is excellent in connecting straight and curved weld-lines with good continuity and accommodates various welding conditions. By using this welding trajectory, the deceleration, which leads to widening of the melt and the heat affected zone, at comer area is reduced with strategic rotation of robot torch in coordination with a positioner providing smooth transition of welding torch orientation. Two types of special clothoid curves are developed for different weld slope conditions. These clothoid curves are applied to the case of linear and rotary Positioners at arc welding robot work-cell.

• Korean Journal of Human Ecology
• /
• v.13 no.6
• /
• pp.959-966
• /
• 2004

The purpose of this research is to analyze the shape of gathered skirts made by different gatherings. The shape of gathered skirts is affected by the amount of the gatherings that control fullness along a waistline seam. The gap also has an effect on the shape. We made a few experiments to make gathered skirts in different gathering conditions. The conditions include two types of ratio of gathers, which were given the total amount of gathering, and two types of spread of gathers, which were calculated for waist and hip. Experiments were conducted to figure out the dressed shape through 3-D measurement Exyma- WBS, and also to investigate the proportion, area distribution, and gap of the shape of gathered skirts on the horizontal section map with Rapid Form 2004 SP3, a software for 3-D shape analysis. As the results show, there were differences among the proportion, area distribution, and gap of the dressed shape. It showed that the shape on the horizontal section map was different because the shape between waist and hip per parts on body was not the same.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.21 no.2
• /
• pp.89-98
• /
• 1985

As a primary step in studying the effects of the netting porosity on the net-shape in the four-seam trawling net, a series of experiments were performed changing the porosity of each panel, with the simplified mo:iel of the bag net made of porous vinyl film and that ma:ie of net webbing. These models were suspended horizontally in circularly flowing water, with two pairs of susp~nding threais to four points of symetry at the border of the bag mouth in place of both wing nets. And then, the section shape of the bag mouth photographed and the tensions on both pairs of suspending threads were measured with two load cells in circularly flowing water. From the results, the auther estimated an experimental equation from the relationship between the porosity of each panel in the bag net and the section shape of the bag mouth, h/w=k (l-Pr_u/lPr_s)

• Journal of the Korea Fashion and Costume Design Association
• /
• v.10 no.2
• /
• pp.105-115
• /
• 2008

Men's outer wear, such as jackets and coats appeared since the 16th century. They have been changed from doublets, coats, justaucorps, tail-coats, frock coats and morning coats to contemporary men's suits. Since the early 17th century, sleeve patterns of men's outer jackets had been mostly two-pieces close fitted patterns. The purpose of this article is to compare sleeve patterns of various jackets, which appear in various historic costume books. Armhole measurements, sleeve head measurements, amounts of ease, armhole depths, armhole widths, crown heights, sleeve width and sleeve angle had been compared to find out the differences among patterns of different times and styles. Coming to the present, the difference between top sleeve and under sleeve became more obvious, and the sleeve angle became less curvy. Another interesting point is that there had been considerable amounts of ease, which is the difference between sleeve head measurements and corresponding armhole measurements. It is because the sleeve has been attached to the armhole not by seam but by string. It is believed that the present sleeves have more natural curve and shape compared to the past.

• Journal of Korea Multimedia Society
• /
• v.17 no.10
• /
• pp.1205-1212
• /
• 2014

In this paper, we propose a high-quality stitching method of 3D multiple dental CT images. First, a weighted function is generated using the difference of two distance functions that calculate a distance from the nearest edge of an overlapped region to each position. And a blending ratio propagation function for two gradient vectors is parameterized by the difference and magnitude of gradient vectors that is also applied by the weighted function. When the blending ratio is propagated, an improved region growing scheme is proposed to decide the next position and calculate the blending intensity. The proposed method produces a high-quality stitching image. Our method removes the seam artifact caused by the mean intensity difference between images and vignetting effect. And it removes double edges caused by local misalignment. Experimental results showed that the proposed method produced high-quality stitching images for ten patients. Our stitching method could be usefully applied into the stitching of 3D or 2D multiple images.

• The Journal of Korean Academy of Prosthodontics
• /
• v.29 no.3
• /
• pp.87-99
• /
• 1991

The effect of oven firing on the color stability and surface texture of extrinsic stains used characterization and color modification of metal cermic restoration were studied by comparing different temperatures and techniques. They were autoglaze technique, applied glaze technique, two step low-fusing glaze technique and one step low-fusing glaze technique. Autoglaze technique and applied glaze technique were air-fired to manufacturer's recommended temperature. Two step low-fusing glaze technique is separated staining and overglazing. Thin slurry of stain powder were air-fired to $1500^{\circ}F$, Overglaze powder powder was then mixed with seam medium and air-fired to $170^{\circ}F$. One step low-fusing glaze technique is combined staining and overglazing. Thin slurry of stain and glaze powder were air-fired to $170^{\circ}F$. The obtained results were as fellows. 1. Slightly significant color differences by colorimeter were found between different stain application and fusion techniques(P<0.05). 2. Two step low-fusing glaze method showed the most rough surface, especially ceramco orage stain(P<0.05). 3. Surface roughness increased gradually in order of autoglaze, applied glaze, one step low-fusing glaze but they were not significantly different(P<0.05). 4. When two step low-fusing glaze was applied, both color measurement and surface texture were sinificantly different from other groups(P<0.05).