• International Journal of Aeronautical and Space Sciences
• /
• v.10 no.1
• /
• pp.67-74
• /
• 2009

In general, the lunar landing stage can be divided into two distinct phases: de-orbit and descent, and the descent phase usually comprises two sub-phases: braking and approach. And many optimization problems of minimal energy are usually focused on descent phases. In these approaches, the energy of de-orbit burning is not considered. Therefore, a possible low perilune altitude can be chosen to save fuel for the descent phase. Perilune altitude is typically specified between 10 and 15km because of the mountainous lunar terrain and possible guidance errors. However, it requires more de-orbit burning energy for the lower perilune altitude. Therefore, in this paper, the perilune altitude of the intermediate orbit is also considered with optimal thrust programming for minimal energy. Furthermore, the perilune altitude and optimal thrust programming can be expressed by a function of the radius of a parking orbit by using continuation method and co-state estimator.

• Korean Journal of Adult Nursing
• /
• v.20 no.1
• /
• pp.1-9
• /
• 2008

Purposes: This study examined uncertainty and nursing need according to illness phases(phase I, II, III) in cancer patients, and investigated relationships between uncertainty and nursing need. Methods: A cross-sectional descriptive study was conducted with a sample of 121 adult cancer patients treated in two hospitals. Results: As for the total score, the uncertainty was not significantly different across the subgroups by illness phase. As for the subscale score, however, two sub-scales of the uncertainty were different across the subgroups. 'The unpredictability' was highest in illness phase I and II groups, while 'the lack of information' was highest in the illness phase III group. Nursing need as the total score was not significantly different across the subgroups by illness phase. However, all subscale scores of the nursing need were significantly different across the subgroups. Educational need was highest in the illness phase I group; physical and emotional needs were highest in the illness phase III group. Uncertainty and nursing need were not related to each other at any illness phase. Conclusion: The results suggest that nursing need and uncertainty may change across illness phases. Clinicians need to consider this pattern in caring for cancer patients.

• Journal of Welding and Joining
• /
• v.23 no.4
• /
• pp.27-33
• /
• 2005

Quantitative evaluation was performed on the microstructure of flux-cored arc(FCA) weld metal using a method blown as IIW scheme. It was mainly intended to figure out any practical difficulties in applying this method and also to provide the consumable makers with basic guide line in developing FCA welding consumables far better properties. Assessment of the experimental results showed IIW scheme was quite reliable in the low heat input range where the acicular ferrite was a major constituent. However, in the high heat input range, some scatter was noticed as the other phases like grain boundary ferrite and Widmansttaten ferrite become dominant. It implies that the accuracy of IIW scheme depends on the faction of microstructural constituents and it become worse as the fraction of latter two phases increases. This tendency was discussed in terms of the characteristics of those two phases. In addition, base line microstructure of rutile type FCA weld metal was addressed for developing new FCA welding consumables intended for higher heat input welding.

• Journal of the Korean Ceramic Society
• /
• v.32 no.2
• /
• pp.257-269
• /
• 1995

The TiC-Co/Al reaction-sintered products were prepared by the infiltration of various Co/Al metal mixture into the preform, and their microstructure, phases, and mechanical properties were investigated. With increasing the atomic ratio of Co/Al, tiC grain shape was changed from spherical to platelet particles, and the grain size increased. The crystalline phases found in the liquid matrix formed by the infiltration of Co/Al metal mixture were determined to be Al5Co2 and AlCo by EDS and XRD, and the two crystalline phases were located dominantly between TiC grains, when the Co/Al atomic ratio was lower than an unity. There was a tendency that the density, bending strength and fracture toughness increase with Co/Al atomic ratio until the infiltrated metal was 100% Co. The maximum value was achieved by the composition containing 100% Co infiltrated metal. The Vickers hardness decreased as Co/Al atomic ratio increased.

• Korean Journal of Materials Research
• /
• v.13 no.11
• /
• pp.756-760
• /
• 2003

Two dimensional computer simulations were conducted on percolative structure in which second phases with various short diameter were arranged in matrix phase. In case of prohibiting the overlap among the second phases, the maximum area fraction of second phase arranged in matrix was increased with higher short diameter. In case of allowing the overlap among the second phases, the critical area fraction was increased with higher short diameter and the total number of distributed second phase was decreased. This results represented that thickness variation of short diameter by grain growth on the production processes affect significantly forming the completion path.

• Journal of Pharmaceutical Investigation
• /
• v.28 no.3
• /
• pp.159-164
• /
• 1998

The O/W and W/O emulsions containing Scutellariae Radix extract(SRE) which is very slightly soluble in oil phases and sparingly soluble in water phases, were prepared by homogenizing water and oil phases with emulsifier. The diameters of emulsion were ranged from 100 to $300\;{\mu}m$. The viscosity of W/O emulsion was higher than that of O/W emulsion. W/O emulsion was more stable than O/W emulsion which was gradually degraded when tested by centrifuge method and temperature tolerance method at $50^{\circ}C$. The antibacterial activity of two emulsions was not significantly different from that of aqueous solution of SRE, and showed similar MIC and bacterial growth inhibition rate.

• Journal of Welding and Joining
• /
• v.32 no.3
• /
• pp.1-10
• /
• 2014

The efficient application of any welding process depends on the understanding of associated process parameters influence on the weld quality. The weld quality includes the weld bead dimensions, temperature distribution, metallurgical phases and the mechanical properties. A detailed review on the experimental and numerical approaches to understand the parametric influence of a single wire submerged arc welding (SAW) and multi-wire SAW processes on the final weld quality is reported in two parts. The first part deals with the experimental approaches which explain the parametric influence on the weld bead dimensions, metallurgical phases and the mechanical properties of the SAW weldment. Furthermore, the studies related to statistical modeling of the present welding process are also discussed. The second part deals with the numerical approaches which focus on the conduction based, and heat transfer and fluid flow analysis based studies in the present welding process. The present paper is the first part.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.1170-1175
• /
• 2005

This paper is analyzed the characteristic of multi-phase inverter for the electric propulsion system. Two BLDC motors with 3 and 7 phases are designed with these features in order to simulate the effect of increasing the number of phases. From the simulation results, the 7-phase given better performance in terms of torque pulsation. Also, the torque pulsation can be reduced further by increasing the number of phases.

• Journal of Powder Materials
• /
• v.14 no.6
• /
• pp.405-409
• /
• 2007

The Cu-based bulk metallic glass (BMG) composites containing Zr-based metallic glass phase have been consolidated by spark plasma sintering using the mixture of Cu-based and Zr-based metallic glass powders in their overlapped supercooled liquid region. The Zr-based metallic glass phases are well distributed homogeneously in the Cu-based metallic glass matrix after consolidation process. The successful consolidation of BMG composites with dual amorphous phases was corresponding to the sound viscous flow of the two kinds of metallic glass powders in their overlapped supercooled liquid region.

• Macromolecular Research
• /
• v.15 no.2
• /
• pp.134-141
• /
• 2007

The direct chromatographic separation of enantiomers by chiral stationary phases (CSPs) has been extensively developed over the past two decades, and has now become the most popular method for the analytical and preparative separations of enantiomers. Polysaccharide derivatives coated onto silica gel, as CSPs, playa significantly important role in the enantioseparations of a wide range of chiral compounds using high-performance liquid chromatography (HPLC). Unfortunately, the strict solvent limitation of the mobile phases is the main defect in the method developments of these types of coated CSPs. Therefore, the immobilization of polysaccharide derivatives onto silica gel, via chemical bonding, to obtain a new generation of CSPs compatible with the universal solvents used in HPLC is increasingly important. In this article, our recent studies on the immobilization of polysaccharide derivatives onto the silica gel, as CSPs, through radical copolymerization with various vinyl monomers are reported. Polysaccharide derivatives, with low vinyl content, can be efficiently fixed onto silica gel with high chiral recognition.