• Phonetics and Speech Sciences
• /
• v.7 no.1
• /
• pp.97-105
• /
• 2015

This research mainly focuses on intonational characteristics of synchronous English speech. Intonation contours were extracted from 1,848 utterances produced in two different speaking modes (solo vs. synchronous) by 28 (12 women and 16 men) native speakers of English. Synchronous speech is found to be slower than solo speech. Women are found to speak slower than men. The effect size of speech rate caused by different speaking modes is greater than gender differences. However, there is no interaction between the two factors (speaking modes vs. gender differences) in terms of speech rate. Analysis of pitch point features has it that synchronous speech has smaller Pt (pitch point movement time), Pr (pitch point pitch range), Ps (pitch point slope) and Pd (pitch point distance) than solo speech. There is no interaction between the two factors (speaking modes vs. gender differences) in terms of pitch point features. Analysis of sentence level features reveals that synchronous speech has smaller Sr (sentence level pitch range), Ss (sentence slope), MaxNr (normalized maximum pitch) and MinNr (normalized minimum pitch) but greater Min (minimum pitch) and Sd (sentence duration) than solo speech. It is also shown that the higher the Mid (median pitch), the MaxNr and the MinNr in solo speaking mode, the more they are reduced in synchronous speaking mode. Max, Min and Mid show greater speaker discriminability than other features.

• English Language & Literature Teaching
• /
• v.13 no.4
• /
• pp.33-58
• /
• 2007

The present paper aims at comparing the two modes of CMC - synchronous and asynchronous - in terms of discourse markers used in turn-initial positions. It further attempts to examine the viability and limitations of these two modes of CMC in fostering EFL learners' face-to-face conversation skills. For these purposes, the present study analyzed 33 Korean EFL learners' Web chat and E-mail exchange data. Discourse markers in the participants' Web chat transcripts and those in their E-mail transcripts were identified and then compared in terms of their frequency and functions. The analysis revealed that the participants show difference in their preference for discourse markers depending on the modes of CMC. Also, the functions of discourse markers used for Web chat showed were strikingly different from those for e-mail. Especially, e-mail discourse markers revealed greater discrepancy from the markers in face-to-face conversation. The differences were found to be attributable to the time factor involved with the turn-taking systems of the two modes of CMC, especially the degree of instantaneousness in their turn-taking. Findings suggest that the turn taking skills and discourse marker use in CMC is not applicable to face-to-face conversation contexts. Pedagogical implications are discussed.

• Wind and Structures
• /
• v.38 no.5
• /
• pp.381-398
• /
• 2024

This study presents a mode analysis of 3D turbulent velocity data around a square-section building model to identify the dynamic system for Kármán-type vortex shedding. Proper orthogonal decomposition (POD) was first performed to extract the significant 3D modes. Magnitude-squared coherence was then applied to detect the phase consistency between the modes, which were roughly divided into three groups. Group 1 (modes 1-4) depicted the main vortex shedding on the wake of the building, with mode 2 being controlled by the inflow fluctuation. Group 2 exhibited complex wake vortexes and single-sided vortex phenomena, while Group 3 exhibited more complicated phenomena, including flow separation. Subsequently, a third-order polynomial regression model was used to fit the dynamics system of modes 1, 3, and 4, which revealed average trend of the state trajectory. The two limit cycles of the regression model depicted the two rotation directions of Kármán-type vortex. Furthermore, two characteristic periods were identified from the trajectory generated by the regression model, which indicates fast and slow motions of the wake vortex. This study provides valuable insights into 3D mode morphology and dynamics of Kármán-type vortex shedding that helps to improve design and efficiency of structures in turbulent flow.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.3
• /
• pp.44-53
• /
• 2010

The H.264/AVC has been designed to use 9 directional intra prediction modes for removing spatial redundancy. It also employs high correlation between neighbouring block modes in sending mode information. For indication of the mode, smaller bits are assigned for higher probable modes and are compressed by predicting the mode with minimum value between two prediction modes of neighboring two blocks. In this paper, we calculated the statistical probability of prediction modes of the current block to exploit the correlation among the modes of neighboring two blocks with several test video sequences. Then, we made the probable prediction table that lists 5 most probable candidate modes for all possible combinatorial modes of upper and left blocks. By using this probability table, one of 5 higher probable candidate modes is selected based on RD-optimization to reduce computational complexity and determines the most probable mode for each cases for improving compression performance. The compression performance of the proposed algorithm is around 1.1%~1.50%, compared with JM14.2 and we achieved 18.46%~36.03% improvement in decoding speed.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.12 no.2
• /
• pp.3-12
• /
• 1975

As for two dimensional added mass coefficients for straight framed hull forms in a free surface of an ideal fluid, theoretical calculations by F.M. Lewis, vertical, K. Wendel, J.H. Hwang, and etc. are available; vertical modes of rectangular and triangle sections by Lewis, vertical, horizontal and torsional models of rectangular and triangle section by Wendel, and systematical calculations for vertical modes of single chine forms by Hwang. In this paper, employing the conformal transformation by which a unit circle and its exterior region can conformally mapped to a polygon and its exterior region, the author calculated two dimensional added inertia coefficients systematically for straight framed sections with single chine in horizontal and torsional modes of vibrations. As the results, it was found that sloping side angle is an important factor measuring the magnitude of two dimensional added inertia coefficient for a set of given values of the sectional area coefficient and the beam-draft ratio. To grasp it cleary in physical sense, pressure distributions are investigated for some typical section contours. The numerical results are presented graphically in the form of two dimensional added sectional area coefficients with beam-draft ratios and sloping side angles as parameters, so that the data may conveniently utilized for estimation of the added inertia coefficients based on a three parameter technique.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.3
• /
• pp.227-236
• /
• 2002

We have performed two kinds of experimental modal analyses fur a radial tire for passenger car under free-suspension. One is the modal analysis to obtain three-dimensional modes of tire using accelerometers and the other is the one to identify cavity resonance frequency using a pressure sensor. From the first analysis, we have obtained the three-dimensional natural modes, which makes it possible to grasp the features of the modes and to classify the vibrational modes into symmetric, non-symmetric, and antisymmetric modes in a simple way by using the experimental results. From the first and the second experimental analyses we have identified the cavity resonance frequency and its three-dimensional mode shape.

• Current Optics and Photonics
• /
• v.2 no.3
• /
• pp.226-232
• /
• 2018

We propose a triangular-multicore hollow optical fiber (TMC-HOF) design for uncoupled mode-division and space-division multiplexing. The TMC-HOF has three triangular cores, and each core has three modes: $LP_{01}$ and two split $LP_{11}$ modes. The asymmetric structure of the triangular core can split the $LP_{11}$ modes. Using the proposed structures, nine independent modes can propagate in a fiber. We use a fully vectorial finite-element method to estimate effective index, chromatic dispersion, differential group delay (DGD), and confinement loss by controlling the parameters of the TMC-HOF structure. We confirm that the proposed TMC-HOF shows flattened chromatic dispersion, low DGD, low confinement loss, low core-to-core crosstalk, and low crosstalk between adjacent modes. The proposed TMC-HOF can provide a common platform for MDM and SDM applications.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.366-369
• /
• 2006

Deformability of RC members in shear is controlled by governing failure modes and material strength. Shear strength of members in D-regions has been explained by a direct load path (direct strut or arch action) and indirect load path (fan action or truss action). Indirect load path including truss action and fan action rely on bond along tension ties. Generally, superposition of two actions results in total shear strength when shear failure modes control. The ultimate deformation depends on controlling failure modes and thereby, their force transfer patterns. Proposed models are capable of explaining of limited deformability of RC members in D-regions.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.603-604
• /
• 2010

In this paper, we analyses a testing methodology that allows for harmless auditing, define three testing modes.heavy, relaxed, and safe modes, and report our results from two experiments. In the first, we compared the coverage and side effects of the three scanning modes using Web applications chosen from the different vulnerable in a previous static verification effort.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.784-787
• /
• 2004

Modified version of subspace iteration method using accelerated starting vectors is proposed to efficiently calculate free vibration modes of structures. Proposed method employs accelerated Lanczos starting vectors that can reduce the number of iterations in the subspace iteration method. Proposed method is more efficient than the conventional method when the number of required modes is relatively small. To verify the efficiency of proposed method, two numerical examples are presented.