본 논문은 선박용 프로펠러 날개단면의 개발 과정을 다루고 있다. 2차원 날개단면의 유체역학적 특성은 캠버 및 두께 분포, 앞날 반경 등 기하학적 형상에 따라 달라진다. 2차원 날개단면 주위의 전 유장을 난류로 고려한 후 해석하기 위해 유한 체적법에 의한 Reynoles time averaged Navier-Stockes 방정식을 이용한 수치해석 기법을 개발하였다. 본 연구에서는 날개단aus 표면에 보다 많은 계산점을 주면서도 받음각의 변화에도 격자계 생성이 용이한 O-Type 격자계를 채택하였고, 전 유동장은 k-${\varepsilon}$ 난류 모형을 적용하여 해석하였다. 본 연구에서 개발된 수치해석 기법은 NACA0012의 실험 결과와 비교하여 계산 정도를 확인하였다. 본 연구에서는 낮은 항력을 갖는 고효율 날개단면 개발을 목표로, 항력이 양호한 날개단면은 공동 터널에서 양력, 항력 및 공동 특성 실험을 수행하였으며, 수치 해석 결과와도 비교하였다. 본 연구를 통하여 개발된 2차원 날개단면 해석용 수치 유체역학 코드는 실험 결과와 잘 일치하고 있음을 알 수 있었다. 이상의 과정을 통하여 기존의의 날개단면인 NACA66 두께 분포와 a=0.8 mean line 캠버를 갖는 KH13보다 효율뿐만 아니라 공동 특성도 우수한 단면인 KH28을 개발할 수 있었다. 새로운 날개 단면인 KH28은 선박용 프로펠러에 적용하기 위한 연구가 지속되어야 하며, 한편 낮은 받음각에서 양-항력 추정의 정확도를 높이기 위해서는 개발된 수치해석 코드에 2-경계층 모형이 적용되어야 할 것으로 본다.
Slot coating process, in continuous and patch modes, has been applied for the many precise coating products, e.g., flat panel displays and second batteries. However, manufacturing uniform coating products is not a trivial task at high-speed operations because various flow instabilities or defects such as leaking, bubbles, ribbing, and rivulets are frequently observed in this process. It is no wonder, therefore, that many efforts to understand the various aspects of dynamics and coating windows of this process have been made both in academia and industry. In this study, as the first topic, flow dynamics within the coating bead in slot coating process has been investigated using the one-dimensional viscocapillary model by lubrication approximation and two-dimensional model by Flow-3D software. Especially, operability windows in both 1D and 2D cases with various slot die lip designs have been successfully portrayed. Also, effects of process conditions like viscosity and coating gap size on slot coating window have been analyzed. Also, some experiments to find minimum coating thickness and coating windows have been conducted using slot die coater implemented with flow visualization device, corroborating the numerical results. As the second topic, flow dynamics of both Newtonian and Non-Newtonian fluids in patch or pattern slot coating process, which is employed in manufacturing IT products such as secondary batteries, has been investigated for the purpose of optimal process designs. As a matter of fact, the flow control in this system is more difficult than in continuous case because od its transient or time-dependent nature. The internal die and die lip designs for patterned uniform coating products have been obtained by controlling flow behaviors of coating liquids issuing from slot. Numerical simulations have been performed using Fluent and Flow-3D packages. Flow behavior and pressure distribution inside the slot die has been compared with various die internal shapes and geometries. In the coating bead region, efforts to reduce irregular coating defects in head and tail parts of one patterned coating unit have been tried by changing die lip shapes. It has been concluded that optimal die internal design gas been developed, guaranteeing uniform velocity distribution of both Newtonian and shear thinning fluids at the die exit. And also optimal die lip design has been established, providing the longer uniform coating layer thickness within one coating unit.
This study aims to develop a restoration model of an armillary sphere of Tongcheon-ui (Pan-celestial Armillary Sphere) by referring to the records of Damheonseo (Hong Dae-Yong Anthology) and the artifact of an armillary sphere in the Korean Christian Museum of Soongsil University. Between 1760 and 1762, Hong, Dae-Yong (1731-1783) built Tongcheon-ui, with Na, Kyung-Jeok (1690-1762) designing the basic structure and Ann, Cheo-In (1710-1787) completing the assembly. The model in this study is a spherical body with a diameter of 510 mm. Tongcheon-ui operates the armillary sphere by transmitting the rotational power from the lantern clock. The armillary sphere is constructed in the fashion of a two-layer sphere: the outer one is Yukhab-ui that is fixed; and the inner one, Samsin-ui, is rotated around the polar axis. In the equatorial ring possessed by Samsin-ui, an ecliptic ring and a lunar-path ring are successively fixed and are tilted by 23.5° and 28.5° over the equatorial ring, respectively. A solar miniature attached to a 365-toothed inner gear on the ecliptic ring reproduces the annual motion of the Sun. A lunar miniature installed on a 114-toothed inner gear of the lunar-path ring can also replay the moon's orbital motion and phase change. By the set of 'a ratchet gear, a shaft and a spur gear' installed in the solstice-colure double-ring, the inner gears in the ecliptic ring and lunar-path ring can be rotated in the opposite direction to the rotation of Samsin-ui and then the solar and lunar miniatures can simulate their revolution over the period of a year and a month, respectively. In order to indicate the change of the moon phases, 27 pins were arranged in a uniform circle around the lunar-path ring, and the 29-toothed wheel is fixed under the solar miniature. At the center of the armillary sphere, an earth plate representing a world map is fixed horizontally. Tongcheon-ui is the armillary sphere clock developed by Confucian scholars in the late Joseon Dynasty, and the technical level at which astronomical clocks could be produced at the time is of a high standard.
입상 활성탄(GAC)에 의한 disperse yellow 3(DY 3) 염료의 흡착을 초기농도, 접촉 시간, 온도 및 pH를 흡착변수로 하는 실험을 통해 등온흡착과 동력학적, 열역학적 파라미터에 대해 조사하였다. pH 변화실험에서 활성탄에 대한 DY 3의 흡착은 산성영역인 pH 3에서 흡착률이 가장 높았다. 이는 양(+)으로 하전된 활성탄 표면과 DY 3의 음이온(OH-) 사이의 정전기적 인력에 기인한 것으로 판단되었다. DY 3의 흡착평형자료로부터 Langmuir 등온흡착식에 가장 잘 맞았으며, 계산된 분리계수(RL) 값으로부터 활성탄이 DY 3을 효과적으로 제거할 수 있다는 것을 알았다. 또한, Temkin 식의 흡착열 관련 상수의 값이 20 J mol-1을 넘지 않아 물리 흡착 공정임을 알 수 있었다. 동력학 실험은 농도별 실험과 온도별 실험 모두 유사 이차 속도식이 오차율 10.72% 이내였다. Weber와 Morris의 입자내 확산 모델의 플로트는 두 단계의 직선으로 나타났다. Stage 2(입자내 확산)의 기울기가 stage 1(경계층 확산)의 기울기보다 작게 나타나 입자 내 확산이 속도지배단계인 것을 확인하였다. 활성탄에 의한 DY 3 흡착의 자유에너지 변화는 298 ~ 318 K에서 모두 음의 값을 나타냈으며, 온도가 증가할수록 자발성이 더 높아졌다. 활성탄에 대한 DY 3의 흡착반응의 엔탈피 변화는 0.65 kJ mol-1 로 흡열반응이었으며, 엔트로피 변화는 2.14 J mol-1 K-1로 양의 값(positive value)을 나타냈다.
선택취수 방법은 성층화된 저수지로부터 공급되는 방류수의 수온, 용존산소농도, 탁도 등의 수질을 제어하고, 하천의 생태계 서식환경을 개선하기 위해 널리 사용되고 있다. 최근 우리나라에서도 하류의 탁수피해 저감을 위해 다단 취수가 가능하도록 기존의 취수시설을 개량하였거나 계획하고 있는 댐들이 늘고 있다. 이 연구의 목적은 대청댐에 선택취수 시설을 도입하였을 경우 하류의 탁수 제어 효과와 저수지 수질에 미칠 영향을 평가하는데 있다. 다양한 선택취수 조건이 방류수 탁도와 저수지 수질 변화에 미치는 영향을 모의하기 위해 선행연구에서 보정 검증한 2차원 폭 방향 평균 수리 및 부영양화 모델을 사용하였다. 연구결과, 2년 연속$(2004\sim2005)$ 수문조건에서 표층수의 선택취수를 통한 댐 하류의 탁수 장기화 저감 효과는 미미한 것으로 평가되었다. 또한 하류에 깨끗한 물을 공급하기 위해 표층수를 과다하게 취수 할 경우, 높은 농도의 인을 포함하고 있는 중층 탁수를 유광대로 유입하게 하는 결과를 초래하여 호수역의 조류 성장을 증가시킬 우려가 있는 것으로 나타났다.
최근 환경 모니터링, 스마트 빌딩, 의료 분야, 농업 분야 등에서 센서 네트워크가 널리 활용되고 있다. 센서 노드는 배터리로 동작한다. 넓은 지역에 배포된 센서 노드의 배터리를 주기적으로 교체하는 것은 불가능하기 때문에 에너지는 센서 네트워크에서 가장 중요한 자원이다. 따라서, 센서 데이터를 수집하는 동안 네트워크 수명을 연장시키기 위한 에너지 효율적인 메커니즘에 대한 연구는 필수적이다. 대표적인 연구로는 송수신하는 데이터의 크기를 줄이기 위한 데이터 압축 기법과 통신간 충돌을 방지하여 에너지 사용의 효율을 높이기 위한 MAC 프로토콜 기법이 있다. 기존 데이터 압축 기법은 센서 데이터의 공간 또는 시간적인 연관성을 이용하며, 기존 MAC 프로토콜은 TDMA, FDMA, CDMA 등의 방법을 통해 데이터의 충돌을 방지한다. 본 논문에서는 MAC 프로토콜 중 하나로 널리 사용되고 있는 TDMA 스케줄을 조정하여 송수신되는 센서 데이터의 크기를 줄이는 새로운 압축 기법을 제안한다. 제안하는 기법은 데이터 전송 시점을 이용하여 센서의 측정값을 인코딩하여 데이터의 크기를 줄이고, 동적으로 시간 슬롯을 할당함으로써 발생되는 전송 지연을 줄인다. 시뮬레이션을 통해 제안하는 기법의 성능 평가를 수행하였으며, 실험 결과, 기존 데이터 수집 기법에 비해 통신 비용이 약 52% 감소하였다.
3D 프린팅 (적층 공정) 기술은 소재와 공정기술의 지속적인 연구개발을 토대로 초기 모형 제작 활용으로부터 현재는 산업현장의 양산형 부품 제작까지 그 쓰임새가 확대되고 있다. 3D 프린팅의 대표적인 고분자 소재로서 고강도 엔지니어링 플라스틱의 하나인 polyamide (폴리아미드) 계열의 소재는 제품의 경량화 및 내구성의 장점으로 자동차용 부품 제작에 주로 활용된다. 이번 연구에서는 적층기법 중 제작품의 물성이 우수한 선택적 레이저 소결 기법 (Selective Laser Sintering)을 적용하여 polyamide 12 (PA12) 및 글라스 비드 (glass bead) 보강 PA12 소재 2가지를 대상으로 시편을 제작하고 온도에 따른 굴곡특성을 분석하였다. 작업 플랫폼 기준으로 $0^{\circ}$, $45^{\circ}$, $90^{\circ}$ 방향으로 각 시편을 제작 후, $-25^{\circ}C$, $25^{\circ}C$, $60^{\circ}C$ 등 3개 시험온도 환경에서 굴곡 테스트를 진행하였다. 그 결과로, PA12 는 $-25^{\circ}C$ 에서 $90^{\circ}$ 제작 방향이, $25^{\circ}C$ 와 $60^{\circ}C$에서는 $0^{\circ}$ 제작방향이 최대 굴곡강도를 가졌다. 글라스비드 보강 PA12는 제작방향이 $0^{\circ}$인 겨우 모든 시험온도에서 최대 굴곡강도 값을 보였다. 두 소재의 서로 다른 굴곡강도 변화 경향은 굴곡시험시 발생하는 응력 종류에 따라 적층 레이어 평면 방향에 의한 영향이 서로 다르기 때문으로 판단된다.
본 연구에서는 상, 하부 2개의 대수층이 연결된 누수대수층에 대해 상부 1층 지하수 양수로 인한 하천수 감소량을 산정하기 위해 개발된 Hunt 해석해의 적용성을 평가하였다. 두 대수층의 투수량계수 및 저류계수, 층간 누수계수, 하천-관정 이격거리, 하상의 수리전도도, 하폭 등 다양한 수리특성치 크기 조합에 따라 양수 후 5년 평균 하천수 감소량을 해석해로 산정하고, 범용적으로 사용되고 있는 MODFLOW 지하수유동모형으로 정교하게 모의된 수치해와의 비교를 통해 하폭을 점으로 간주하여 유도한 해석해 적용 결과가 정확한지를 평가하였다. 그 결과 하천-관정 이격거리가 하폭 이상되거나, 하천고갈인자(Stream Depletion Factor)가 약 3,000일 이어야 해석해로 산정한 하천수 감소비의 오차를 0.05 아래로 줄일 수 있는 것으로 분석되었다. 또한 하상수리전도성이 1 m/d 보다 작거나, 하부대수층의 수리확산계수가 100 ㎡/d 보다 작거나, 상부와 하부대수층의 수리확산계수비가 5 이상, 층간 누수계수가 0.0004 m/d 보다 작을 때 해석해가 수치해에 비해 전반적으로 과다하게 산정되는 것으로 분석되었다.
The quality of meat is highly variable in many properties. This variability originates from both animal production and meat processing. At the pre-slaughter stage, animal factors such as breed, sex, age contribute to this variability. Environmental factors include feeding, rearing, transport and conditions just before slaughter (Hildrum et al., 1995). Meat can be presented in a variety of forms, each offering different opportunities for adulteration and contamination. This has imposed great pressure on the food manufacturing industry to guarantee the safety of meat. Tissue and muscle speciation of flesh foods, as well as speciation of animal derived by-products fed to all classes of domestic animals, are now perhaps the most important uncertainty which the food industry must resolve to allay consumer concern. Recently, there is a demand for rapid and low cost methods of direct quality measurements in both food and food ingredients (including high performance liquid chromatography (HPLC), thin layer chromatography (TLC), enzymatic and inmunological tests (e.g. ELISA test) and physical tests) to establish their authenticity and hence guarantee the quality of products manufactured for consumers (Holland et al., 1998). The use of Near Infrared Reflectance Spectroscopy (NIRS) for the rapid, precise and non-destructive analysis of a wide range of organic materials has been comprehensively documented (Osborne et at., 1993). Most of the established methods have involved the development of NIRS calibrations for the quantitative prediction of composition in meat (Ben-Gera and Norris, 1968; Lanza, 1983; Clark and Short, 1994). This was a rational strategy to pursue during the initial stages of its application, given the type of equipment available, the state of development of the emerging discipline of chemometrics and the overwhelming commercial interest in solving such problems (Downey, 1994). One of the advantages of NIRS technology is not only to assess chemical structures through the analysis of the molecular bonds in the near infrared spectrum, but also to build an optical model characteristic of the sample which behaves like the “finger print” of the sample. This opens the possibility of using spectra to determine complex attributes of organic structures, which are related to molecular chromophores, organoleptic scores and sensory characteristics (Hildrum et al., 1994, 1995; Park et al., 1998). In addition, the application of statistical packages like principal component or discriminant analysis provides the possibility to understand the optical properties of the sample and make a classification without the chemical information. The objectives of this present work were: (1) to examine two methods of sample presentation to the instrument (intact and minced) and (2) to explore the use of principal component analysis (PCA) and Soft Independent Modelling of class Analogy (SIMCA) to classify muscles by quality attributes. Seventy-eight (n: 78) beef muscles (m. longissimus dorsi) from Hereford breed of cattle were used. The samples were scanned in a NIRS monochromator instrument (NIR Systems 6500, Silver Spring, MD, USA) in reflectance mode (log 1/R). Both intact and minced presentation to the instrument were explored. Qualitative analysis of optical information through PCA and SIMCA analysis showed differences in muscles resulting from two different feeding systems.
Adhesive bonding is currently widely used in many industrial fields, particularly in the aeronautics sector. Despite its advantages over mechanical joints such as riveting and welding, adhesive bonding is mostly used for secondary structures due to its low peel strength; especially if it is simultaneously exposed to temperature and humidity; and often presence of bonding defects. In fact, during joint preparation, several types of defects can be introduced into the adhesive layer such as air bubbles, cavities, or cracks, which induce stress concentrations potentially leading to premature failure. Indeed, the presence of defects in the adhesive joint has a significant effect on adhesive stresses, which emphasizes the need for a good surface treatment. The research in this field is aimed at minimizing the stresses in the adhesive joint at its free edges by geometric modifications of the ovelapping part and/or by changing the nature of the substrates. In this study, the finite element method is used to describe the mechanical behavior of bonded joints. Thus, a three-dimensional model is made to analyze the effect of defects in the adhesive joint at areas of high stress concentrations. The analysis consists of estimating the different stresses in an adhesive joint between two 2024-T3 aluminum plates. Two types of single lap joints(SLJ) were analyzed: a standard SLJ and another modified by removing 0.2 mm of material from the thickness of one plate along the overlap length, taking into account several factors such as the applied load, shape, size and position of the defect. The obtained results clearly show that the presence of a bonding defect significantly affects stresses in the adhesive joint, which become important if the joint is subjected to a higher applied load. On the other hand, the geometric modification made to the plate considerably reduces the various stresses in the adhesive joint even in the presence of a bonding defect.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.