• Journal of applied mathematics & informatics
• /
• 제30권1_2호
• /
• pp.337-346
• /
• 2012

In this paper we construct a new type of twisted $q$-Genocchi numbers $G_{n,q,w}^{({\alpha})}$ and polynomials $G_{n,q,w}^{({\alpha})}(x)$. Some interesting results and relationships are obtained.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.290-292
• /
• 2007

A twisted nematic type liquid crystal electro-optic modulator (TN-LC modulator) was developed. The modulator used single polarizer and the reflection on-off ratio was maximized by optimization of twist angle and retardation of liquid crystal cell. The TNLC modulator shows better sensitivity and response time than conventional liquid crystal modulator.

• Journal of Information Display
• /
• 제5권3호
• /
• pp.14-17
• /
• 2004

We have developed a new type of transflective liquid crystal display (LCD) with a single cell gap and a single LC mode. In our transflective configuration, a single LC mode of a 60$^{\circ}$ twisted nematic LC was used for both transmissive and reflective applications. The measured electro-optic characteristics of our transflective LC cell agree well with numerical simulation results. Moreover, the transmittance was found to show similar behavior to the reflectance.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.31-34
• /
• 2004

A new extrusion process of the circular section product with helical fins could be developed by using rotating extrusion dies. The twisting of extruded product is caused by the twisted conical die surface connecting the die entrance section and the die exit section linearly. But, until now, because the process has used fixed extrusion dies, it needs high pressure in order to twist billet and form fin shape on the surface of billet. So, during extruding billet, in order not to twist billet, the extrusion dies is needed to rotate itself instead of twisting billet. And in order to rotate dies, the shape of inside contour of extrusion dies must have conical type with twisted Inclined die surface connecting the die entrance section and the die exit section linearly. The results of experiments show that, in spite of using twisted extrusion dies, twisting of the billet should not happen because of rotating dies in the opposite direction of twisting direction of billet during extruding billet, and, from the results, it shows that it can decrease the power of extrusion pressure and could prevent crack of teeth for fin forming.

• Structural Engineering and Mechanics
• /
• 제86권4호
• /
• pp.519-533
• /
• 2023

This work focuses on the dynamic analysis of thermal barrier coated straight and curved turbine blades modelled as functionally graded sandwich panel under thermal environment. The pre- twisted straight/curved blade model is considered to be fixed to the hub and, the complete assembly of the hub and blade are assumed to be rotating. The functionally graded sandwich composite blade is comprised of functionally graded face-sheet material and metal alloy core. The constituents' material properties are assumed to be temperature-dependent, however, the overall properties are evaluated using Voigt's micromechanical scheme in conjunction with the modified power-law functions. The blade model kinematics is based on the equivalent single-layer shear deformation theory. The equations of motion are derived using the extended Hamilton's principle by including the effect of centrifugal forces, and further solved via 2D- isoparametric finite element approximations. The mesh refinement and validation tests are performed to illustrate the stability and accurateness of the present model. In addition, frequency characteristics of the pre-twisted rotating sandwich blades are computed under thermal environment at various sets of parametric conditions such as twist angles, thickness ratios, aspect ratios, layer thickness ratios, volume fractions, rotational velocity and blade curvatures which can be further useful for designing the blade type structures under turbine operating conditions.

• 대한전자공학회논문지
• /
• 제17권6호
• /
• pp.78-85
• /
• 1980

본 논문에서는 주로 bifilar pair의 연선에 의한 대칭 3dB quadrature hybrid 회로의 구성에 관하여 고찰 연구 하였다. 연선으로된 두 개의 하이브리드를 종속연결함으로서 VHF 대에서 결합손실(coupling loss)이 작으며 한 옥타브의 대성폭을 갖는 quadrature hybrid 회로를 실현 할 수 있었다. 이러한 유형의 하이브리드는 짜임새가 간결하면서도 저렴하므로 1GHz 이하의 주파수 대역에서 일반적으로 사용되고 있는 동축선 형 또한 인쇄회로형보다 오히려 유리하다고 생각된다 본 연구는 텔레비젼 전파의 고스트 방지를 위하여 두개의 다른 안테나 신호를 혼합하는 하이브리드 회로를 얻기위한 설계방법을 제시한 것이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.432-433
• /
• 2006

Electro-optical (EO) characteristics of twisted nematic (TN) - liquid crystal display (LCD) on the NDLC thin film using obliquely ion beam (IB) exposure as new ion beam (IB) type system (DuoPIGatrion ion source). A good uniform alignment of the nematic liquid crystal (NLC) alignment with the ion beam exposure on the NDLC thin film was observed. In addition, it can be achieved the good EO properties of the ion-beam-aligned TN-cell on polyimide surface ; the stable VT curve in the ion-beam-aligned TN cell on the NDLC thin film with ion beam exposure using new type IB equipment was obtained. and the fast response time in the ion-beam-aligned TN cell on the NDLC thin film with ion beam exposure using new type IB equipment was obtained.

• 소성∙가공
• /
• 제5권2호
• /
• pp.165-175
• /
• 1996

the process of strip twisting is practiced for the manufacture of some commercial parts such as elements for tube type line mixers. A thin metal strip with rectangular cross section is twisted thru an angle greater than 180。. Initial geometry is altered in to a complex one with dimen-sional changes. In practice several tryouts are necessary to obtain required dimensional accu-racies. A simple analysis model is proposed to predict the dimensional changes forming torque and axial force.

• 한국화재소방학회논문지
• /
• 제30권1호
• /
• pp.49-56
• /
• 2016

본 논문에서는 동절기 소방배관의 동파방지를 위한 열선의 직선 시공과 감기 시공의 효과를 수치해석을 통하여 분석하였다. 두 시공법들의 효과 분석을 위하여 3차원 에너지방정식과 비정상 비압축성 Navier-Stokes 방적식의 비정상 해를 구하였다. 수치해석에서 물의 자연대류와 소방 배관의 열전도 방정식이 상호작용을 하므로 복합열전달 해석을 상용코드 ANSYS-FLUENT에서 제공하는 압력-속도 연성기법들 중의 하나인 SIMPLE 알고리즘을 이용하여 수행하였다. 수치해석을 통하여 시간에 따른 배관 내의 유동장 및 온도분포와 배관 내 물의 최대 및 최소온도 변화를 고찰하였다. 수치해석 결과 배관 단위 길이 당 투입열량이 동일한 경우에 감기 시공과 직선 시공의 동파방지 효과는 거의 동일함을 확인하였다. 따라서, 열선 손상과 단락 등을 고려하면 직선 시공이 더 나은 시공법이라 판단된다.

• 한국해양공학회지
• /
• 제32권6호
• /
• pp.419-426
• /
• 2018

Recently, in an effort to reduce the energy efficiency design index (EEDI), studies on energy saving devices (ESDs) have been conducted. In this study, we designed a post-device suitable for a KRISO container ship (KCS) using computational fluid dynamics (CFD). In order to increase the efficiency of the post-device, a twisted rudder was used, which has a proven performance (showing a 1.34% reduction in DHP compared to the bare hull at 24 knots) in previous research at Pusan National University. In addition, an increase in efficiency was expected by the use of a rudder bulb, including the discontinuous section of the twisted rudder and a divergent propeller cap to prevent the contraction of the wake. The optimization criterion was the case where the delivery power was the least compared with the bare hull. We analyzed the cause of the efficiency increase through an analysis of the self-propulsion factor. The case study for optimization was divided into 4 types (1. clearance of the bulb and cap, 2. shape of the bulb, 3. size of the bulb and cap, and 4. asymmetric bulb). Finally, with a clearance of 50 mm from the ship, a spherical bulb with the cap having an angle of $5^{\circ}$, and an asymmetric rudder bulb with a bulb diameter of 1.2HH/1.4H (horizontal/vertical) showed a 2.05% reduction in DHP compared to the bare hull at 24 knots. We will fabricate a post-device that will be optimized in the future and verify the performance of the post-device through model tests.