• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.5
• /
• pp.825-831
• /
• 2023

The propellers used for big ships have a large diameter and are very heavy. In order to apply a precise and safe work process to them, it is necessary to use an exclusive turning system. For this reason, various techniques are applied to produce them. However, workers' convenience and safety are not taken into consideration enough at production sites. Conventionally, these propellers are designed to be separated as their turning system is loaded and rotated by empty weight. Therefore, it is necessary to replace such a design. This study tries to find the weaknesses of the design and structure of a conventional propeller turning system for large ships, to verify structure integrity of a structure in structural analysis, and to devise a plan for designing a new type of turning system. In the basic concept design and structural analysis for the turning system used in the propeller finishing process for large ships, this study drew the following conclusions. It was possible to develop the work process of the turning system for the propeller finishing process used for large ships, to obtain the dimensions for exterior design through a basic design. Structural analysis was conducted to find the structure integrity of the turning system. As a result, in the rail installed to transfer a gantry, the maximum stress was about 45MPa, about 5.5 times lower than the yield strength 250MPa. Therefore, the turning system was judged to be safe structurally.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.6
• /
• pp.871-877
• /
• 2012

New materials widely used for automobile related industry, aircraft, space development area are mostly high hardness materials. The hardness value of some hardened materials is over HRC45 and machining of this hardened materials is called as hard turning. Hard turning has its advantage on processing flexibility, cycle time and tool cost reduction. Also this process obtains high efficiency in processing and precise surface roughness through application of the CBN tools. In hard turning process with CBN tool, surface integrity is the important factor for considering the design of machine part and component under high stress and load conditions. A purpose of this study is to analyze optimal condition in hard turning process of AISI 52100 steel (HRC62) with high CBN and low CBN on turning characteristics, tool wear mechanism comparison and surface integrity.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.270-276
• /
• 2000

Hard turning has the potential to replace grinding process and to achieve significant reduction in production time and cost. The main applications for hard turning is finishing process, namely grinding process. Therefore, it must be able to satisfy high surface integrity of the workpiece. This paper discusses surface quality in terms of residual stress and damaged layer with respect to cutting parameters in an intermittent hard turning. Damaged layer experiment is carried out orthogonal array. From that is based on the orthogonal array. From the response table, cutting parameters are analyzed from the view point of the damaged layer and residual stress. From this experimental results, even though in the intermittent hard turning, surface integrity turns out be good enough for replacing grinding process.

• Coupled systems mechanics
• /
• v.13 no.3
• /
• pp.219-229
• /
• 2024

By introducing optimization algorithms into the machining process, product quality can be improved, time saved, and costs reduced. The cutting speed and feed can be handled by the turning machine. The approach of optimizing is used to manage pyrotechnics, Lawler's, greedy, bacterial colony, elephant herding, ant lion, spiral, auction, and pattern search for these ten odd ways. Ten artificial optimization methodologies were used to investigate the time and cost of a turning machine. It has been discovered how to create the optimal turning machine procedure. The best solution approach for the turning machine process problem is found, and the results are verified using ANSYS.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.2
• /
• pp.23-30
• /
• 2008

As a basic machining process, turning is a widely used machining process in which a single-point cutting tool removes material from the surface of a rotating material. A common method of evaluating machining performance is to measure the surface roughness. In a turning operation, it is important to select cutting conditions for achieving high cutting performance. As a rule, cutting conditions can be classified into feed rate, depth of cut and insert radius. While cutting process even though cutting conditions are optimized, the average roughness can be deterioration due to wear of the cutting tool edge. In this study, the aim is to maintain the average roughness even though the cutting condition is irregularly changing within the predictable range due to the working environment. First, the surface roughness model influenced by cutting conditions is constructed based on the experimental results in a turning operation, Second, applying the sliding mode control theory to the turning operation model which is composed of the surface roughness model and the motor transfer function, the surface roughness is closed to the desired value. Finally, the effectiveness of this approach is demonstrated through the computer simulation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.195-199
• /
• 2001

The flow turning process, an incremental forming process, is a cost-effective forming method for axi-symmetric intricate parts to net shape. However, the flow turning process shows a fairly complicated deformation, it is very difficult to obtain satisfactory results. Therefore extensive experimental and analytical research has not been carried out. In this study, an fundamental experiment was conducted to improve productivity with process parameters such as tool path, angle of roller holder($\alpha$), feed rate(v ) and comer radius of forming roller(Rr). These factors were selected as variables in the experiment because they were most likely expected to have an effect on spring back. The clearance was controlled in order to achieve the precision product which is comparable to deep drawing one. And also thickness and diameter distributions of a multistage cup obtained by flow turning process were observed and compared with those of a commercial product produced by conventional deep drawing.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.6
• /
• pp.62-68
• /
• 2012

Geometry of a screw fabricated by a turning process determined by the shape of the tool, feed rate of the tool and rotation speed of the spindle. Therefore, computing the exact geometry of the screw is very important to perform a simulation on machining or an evaluation of the workpice quality. In this paper, a new mathematical geometry model of the 3 dimensional screw is fabricated by turning process introduced for the exact geometry computation. Becasue model has a parametric formulation, it is easy to process for a CAD geometry or apply for a machining simulation. Also, it can be applied to process planning because it gives precise machined geometry on whole the 3 dimensional surface of the screw. This paper introduces a new parametric model of a geometry for screw fabricated by turning process. As an application, a simulation software for the 3 dimensional screw surface is developed and evaluated for several manufacturing parameters.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.123-124
• /
• 2007

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.6
• /
• pp.27-32
• /
• 2011

In recently, it is demanded development of manufacturing techniques for machining of various mechanical parts. Therefore the development of turning is one of the important manufacturing techniques. In this study, an experimental shape in tapered groove turning was suggested, and the turning process was investigated by analyzing cutting speed, feed rate, tapered angle, depth of cut. The surface roughness and cutting force change in the workpiece was measured. From the results, the optimum machining conditions are obtained by design of experiments.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.4
• /
• pp.57-63
• /
• 2011

The aim of this study is to analyze turning process using commercial FEM simulation code. Various simulation models of orthogonal cutting process for 3 layers of metallic material have been simulated and analyzed. The workpiece material used for the orthogonal plane-strain metal cutting simulation consists of three layers, which are Allow Tool Steel, Aluminum and Stainless Steel. The finite element model is composed of a deformable workpiece and a rigid tool. The tool penetrates through the workpiece at a constant speed and constant feed rate. As an analytical result, detailed cutting temperature, strain, pressure, residual stress for both a tool and each layer of workpiece were obtained during the turning process. It has been closely observed that the chip flow curve deforms continuously.