Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지

A Study on Cutting Characteristic of Tapered Groove in Turning

선삭가공에서의 테이퍼 홈 절삭특성에 관한 연구

  • 최치혁 (창원대학교 기계설계공학과) ;
  • 김동현 (창원대학교 기계설계공학과) ;
  • 이춘만 (창원대학교 기계설계공학과)
  • Received : 2011.11.21
  • Accepted : 2011.12.06
  • Published : 2011.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

In recently, it is demanded development of manufacturing techniques for machining of various mechanical parts. Therefore the development of turning is one of the important manufacturing techniques. In this study, an experimental shape in tapered groove turning was suggested, and the turning process was investigated by analyzing cutting speed, feed rate, tapered angle, depth of cut. The surface roughness and cutting force change in the workpiece was measured. From the results, the optimum machining conditions are obtained by design of experiments.

Keywords

References

  1. Choi, T. K., Kim, J. S., Park, J. H. and Lim, H. J., "The Machinability Estimation Depending on Cutting Condition in Al6061-T6 Turning Operations", Journal of the Korean Society of Machine Tool Engineering, Vol. 18, No. 12, pp. 675-680, 2009.
  2. Fung, Eric H. K., Cheung, S. M. and Leung, T. P., "The implementation of and error forecasting and compensation system for roundness improvement in taper turning", Computers in Industry, Vol. 35, pp. 109-120, 1998.
  3. Yoon, Y. S. and Lee, S. J., "Prediction the Surface Profile in the Single Point Diamend Turning", Journal of the Korean Society for Precision Engineering, Vol. 11, No. 5, pp. 189-198, 1994.
  4. Hwang, Y. K., Chung, W. J. and Lee, C. M., "Experimental Study of Cutting Force and Surface Roughness Prediction in MQL Turning Al 6061", Journal of the Korean Society for Precision Engineering, Vol. 25, No. 6, pp. 159-167, 2008.
  5. Cho, G. J. and Park, J. N, "A Study on the Cutting Characteristic in the Turning using TiAlN Coated Tools", Proc. of the Korean Society of Manufacturing Process Engineers Conference, pp. 69-74, 2005.
  6. Sim, G. J., Cheong, C. Y., Oh, S. H. and Seo, N. S, "A Study on the Classification and Prediction of the Chip Type under the Specified Cutting Conditons in Turning", Journal of the Korean Society for Precision Engineering, Vol. 12, No. 8, pp. 53-62, 1995.
  7. Ssengonzi, J. B., Lee, J. M. and Yum, Y. H., "A Study on the Prediction of the Limiting Depth of Cut in Dynamic Cutting of a Tapered Workpiece", Transaction of the Korean Society of Mechanical Engineers, Vol. 6, No. 3, pp. 271-281, 1982.
  8. Eyup, S. T., Can, Cogun, "A cutting force induced error elimination method for turning operations", Journal of Materials Processing Technology, Vol. 170, pp. 192-203, 2005. https://doi.org/10.1016/j.jmatprotec.2005.05.003
  9. Lee, M. J., Hwang, Y. K. and Lee, C. M, "A Study on the Development of Analysis Model for Prediction of Relative Deformation between Cutting Tool and Workpiece", Journal of the Korean Society for Precision Engineering, Vol. 27, No. 4, pp. 20-26, 2010.
  10. Shin, D. S., Lee, J. H., Lim, S. H., Kim, J. D. and Lee, S. J., "Cutting Characteristics on Rake Angle in Laser-Assisted Machining of Silicon Nitride", Journal of the Korean Society for Precision Engineering, Vol. 26, No. 4, pp. 47-54, 2009.