• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 춘계학술대회 논문집
• /
• pp.102-107
• /
• 1993

The achievable machining accuracy depends upon the level of the micro-engineering, and the dimensional tolerances in the order of 10nm and surface roughness in the order of 1nm are the accuracytargets to be achieved today. Suchrequirements cannot be satisfiedby the conventional machining processes. Single point diamond turning is one of the new techniques which can produce the parts with such accuracy limits. The aims of this thesis are to get a better understanding of the complex cutting process with a diamond tool and, consequently, to develope a predicting modelof a turned surface profile. In order to predict the turned surface profile, a numerical model has been developed. By means of this model, the influences of the cutting conditions, the material properties of the workpiece, the geometry of the cutting tool and the dynamic behaviour of the lathe and their influences via the cutting forces upon the surface roughness have been estimated.

• 한국정밀공학회지
• /
• 제9권3호
• /
• pp.117-121
• /
• 1992

There have been many studies on chatter vibration in machining but there seems to be no regulations to decide the commencing point of chatter objectively. The development of an objective method which can estimate and detect chatter commencement is very much in need for automatic manufacturing systems, dynamic performance tests for machine tools, and so on. In this study, an approach for in-process monitoring and for deciding commencing point of the chatter vibration using the frequency band-energy method was proposed. From this method, in-process monitoring system for detection the chatter vibration was developed, and investigated its practical possibility. As a result, it is shown by experiments that the chatter vibtation can be detected accurately. Since the changing pattern of the signal energy in certain frequency band during chattering is seldom affected by the variation of cutting conditions, if adequate pre-measures are taken, this method can be widely used in most machining processes.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권3호
• /
• pp.3-7
• /
• 2005

This paper presents the experimental results to verify the atomization characteristics and environmental impact of cutting fluid. Even though cutting fluid improves the productivity through the cooling and lubricating effects, environmental impact due to cutting fluid usage is also increased on factory shop floor. Cutting fluid's aerosol via atomization process can generate human health risk such as lung cancer and skin diseases. Experimental results show that the generated fine aerosol of which particle size less than 10 micron appears near working zone under typical operation conditions. The aerosol concentration also exceeds NIOSH regulations. This research can be provided as a basis of environmental impact analysis for environmental consciousness.

• 한국정밀공학회지
• /
• 제3권4호
• /
• pp.43-52
• /
• 1986

Experimental results on plastic strain induced in truning operation are presented in this paper. The plastic strain is computed by lagrangian strain using grid method, and metal cutting phenomena are also illustrated by micrograph and distribution figures of plastic strain and microvickers hardness of the machining surface. In the cutting of ductile materials, such as carbon steel, generally, the plastic strain is found to be concentrated near the surface. The amount of plastic strain increases with increasing cutting speed and feed rate. The dustribution of microvickers hardness is greater near the cutting surface and decreases from the machining surface under which its hardness returns to the normal hardness of the material.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.80-87
• /
• 1995

An experimental study of hot machining has performed to improve themachinability of Inconel 718. This experiment used plasma arc for heating materials and Whisker-reinforced aluminum oxide ceramic tool insert. An assembled plasma heating system are described and experimental results obtained from bothconventional and plasma hot machining of Iconel 718 are compared. Turning experiments with plasma heating demonstrated the following effectiveness. 1) The cutting force was reduced with increasing surface temperature of workpiece from 450 .deg. C up to 720 .deg. C as much as approximately from 20 to 40%. 2) Surface roughness(Ra) was improved by as much as a factor 2 in case of one pass cutting with new ceramic tool inserts. 3) The depth of cut notchwear at primarycutting tool was singificantly reduced.

• 열처리공학회지
• /
• 제7권3호
• /
• pp.199-205
• /
• 1994

The fracture characteristics and tool life of ceramics and WC, CBN cutting tool when turning heat treated steel STD11($H_RC$ 60) were investigated experimentally to clarify the machinability and optimum tool materials in cutting of difficult-to-cut material with high hardness. Forthermore, the behaviors of the tool wear and failure were examined with regard to cutting force. The hardened steel wore the cutting tool edge rapidily and increased the cutting forces, especially radial force. The tool was worn by the abrasive action. Flank Weat of $Al_2O_3-TiC$ ceramic and WC tool become relatively large and CBN & $Al_2O_3$, ceramic tool had a long life among the tool materials tested. The tool fracture patterns were just like minor cutting wear, flank wear, crater wear, notch wear, chipping. Flank wear rate was accelerated by occurrence of chipping. During the proceeding of machining, it was possible to foresee the catastrophic fracture of tool by abrupt increase of radial force.

• Journal of Computational Design and Engineering
• /
• 제2권3호
• /
• pp.137-147
• /
• 2015

In this study, a new methodology in predicting a system output has been investigated by applying a data mining technique and a hybrid type II fuzzy system in CNC turning operations. The purpose was to generate a supplemental control function under the dynamic machining environment, where unforeseeable changes may occur frequently. Two different types of membership functions were developed for the fuzzy logic systems and also by combining the two types, a hybrid system was generated. Genetic algorithm was used for fuzzy adaptation in the control system. Fuzzy rules are automatically modified in the process of genetic algorithm training. The computational results showed that the hybrid system with a genetic adaptation generated a far better accuracy. The hybrid fuzzy system with genetic algorithm training demonstrated more effective prediction capability and a strong potential for the implementation into existing control functions.

• 대한기계학회논문집
• /
• 제18권12호
• /
• pp.3118-3126
• /
• 1994

This paper describes the use of the concept of (relative) entropy for effective characterization of the amplitude and the frequency distributions of the surface profile formed in machining operation. For this purpose, a theoretical model for surface texture formation in turning operation is developed first. Then, the concept of (relative) entropy is reviewed and its effectiveness is examined based on the simulation and experimental results. The results also suggest that under random tool vibration the effect of the geometrical factors on the surface texture formation can be successfully decomposed and therefore, identified by applying the concept of (relative) entropy.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1052-1053
• /
• 2006

Aluminum-based composites reinforced with various amounts of $\alpha-Si_3N_4$ were produced by powder metallurgy (P/M). The machinability properties of $MMC_s$ were determined by means of cutting forces and surface roughness. Machining tests were carried out by using PCD and K10 tools. Increasing of $Si_3N_4$ volume fraction in the matrix resulted in a decrease of the surface roughness and turning forces. PCD cutting tools showed better cutting performance than K10 tools.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1099-1104
• /
• 2004

As consumer in optics, electronics, aerospace and electronics industry grow, the demand for ultra precision aspherical surface lens increases higher. To enhance the precision and productivity of ultra precision aspherical surface micro lens, the following specification of ultra precision grinding system is required: the highest rotational speed of the grinder is 100,000rpm and its turning accuracy is $0.1{\mu}m$, positioning accuracy is $0.1{\mu}m$. The development process of the grinding system for the ultra precision aspherical surface micro lens for optoelectronics industry is introduced. In the work reported in this paper, an intelligent grinding system for ultra precision aspherical surface machining was designed by considering the factors affecting the surface roughness and profiles accuracy. An aerostatic form was adopted to build the spindle of the workpiece and the spindle of grinder and ultra precision LM guide way was adopted in this system.