• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.2
• /
• pp.177-186
• /
• 2017

This study is intended to provide navigator with specific information necessary to assist in the avoidance of collision and in operation of ships to evaluate the maneuverability of research vessel Jera. Authors carried out full-scale sea trials for turning test, zig-zag test, and spiral test at actual sea-going condition, which were performed on starboard and port sides with 10-20 rudder angle at service speed of 10 knots. The turning circle was much different at both of the turning of port and starboard which was longer at the starboard than at the port. In the zig-zag test results, the port and starboard was $10^{\circ}$ the first and second overshoot angles were $6.0^{\circ}$, $5.8^{\circ}$ and $6.3^{\circ}$, $7.1^{\circ}$ respectively and the first overshoot angles were $16.4^{\circ}$, $17.6^{\circ}$ when using $20^{\circ}$. Her maneuverability index T and N can be easily determined by using an analogue computer with the data obtained from the zig-zag tests where K is a constant representing the turning ability and T is a constant representing her quick response. In the zig-zag tests under $10^{\circ}$ or $20^{\circ}$ at rudder angle, the value K is 0.149. 0.123 sec- and T is 11.853 and 6.193 sec and angular velocity is $0.937^{\circ}/sec$ and $1.636^{\circ}/sec$. In the spiral test, the loop width was unstable at $+0.51^{\circ}$ and $-1.19^{\circ}$ around the midship of rudder, but the tangent line at $0^{\circ}$ was close to vertical. From the sea trial results, we found that she did comply with the present criterion in the standards of maneuverability of IMO.

• Journal of the Korean Institute of Navigation
• /
• v.10 no.2
• /
• pp.83-96
• /
• 1986

In the restricted sea way such as fair way in harbor, narrow channel etc, the safe ship-handling is a very important problem, which is greatly related with turning ability of ships. It is of great importance that ship-handlers can grasp the position of pivoting point varying with time increase at any moment for relevant steering activities. Mean while, in advanced ship-building countries they study and investigated pivoting point related with turning characteristics, hut their main interest lies in ship design, not in safe ship controlling and maneuvering. In this regards it is the purpose of this paper to provide ship-handlers better under standing of pivoting point location together with turning characteristics and then to help them in safe ship-handling by presenting fact that pivoting points vary according to configuration of ships. The author calculated the variation of pivoting point as per time increase for various type of vessels, based on the hydrodynamic derivatives obtained at test of Davidson Laboratory of Stevens Institutes of Technology , New Jersey, U.S.A. The results were classified and investigated according to the magnitude of block coefficient , length-beam ratio, length-draft ratio, rudder area ratio ete, and undermentioned results were obtained. (1) The trajectory of pivoting point due to variation of rudder angle are all the same at any time, though the magenitude of turning circle are changed variously. (2) The moving of pivoting point is affected by the magnitude of block coefficient, length-beam ratio, length-draft ratio, however the effect by rudder area ratio might be disregarded. (3) In controlling and maneuvering of vessels in harbor, ship-handlers might regard that the pivoting point would be placed on 0.2~0.3L forward from center of gravity at initial stage. (4) The pivoting point of VLCC or container feeder vessels which have block coefficient more than 0.8 and length-beam ratio less than 6.5 are located on or over bow in the steady turning. (5) When a vessel intends to avoid some floating obstruction such as buoy forward around her eourse, the ship-handler might consider that the pivoting point would be close by bow in ballast condition and cloase by center of gravity in full-loaded condition.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.5
• /
• pp.287-296
• /
• 2020

The present study aims to improve the accuracy of the maneuvering simulations based on captive model test results. To derive the hydrodynamic coefficients in a self-propelled condition, a mathematical maneuvering model using a whole vehicle model was established. Captive model tests were carried out using the Vertical Planar Motion Mechanism (VPMM) equipment. A motor controller was used to control the constant propeller revolution rate during pure motion tests. The resistance tests, self-propulsion tests, static drift tests, and VPMM tests were performed in the towing tank of Seoul National University. When the vertical drift angle changes, the gravity load on the sensors were changed. The hydrodynamic forces were deduced by subtracting the gravity load from the measured forces. The hydrodynamic coefficients were calculated using the least-square method. The simulation of the turning circle test was compared with the free-running model test result, and the error of the turning radius was 8.3 % compared to the free-running model test.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.5
• /
• pp.848-872
• /
• 2015

Hydrodynamic derivatives or coefficients are required to predict the maneuvering characteristics of a marine vehicle. These derivatives are obtained numerically for a DTMB 5512 model ship by virtual simulating of captive model tests in a CFD environment. The computed coefficients are applied to predict the turning circle and zig-zag maneuvers of the model ship. The comparison of the simulated results with the available experimental data shows a very good agreement among them. The simulations show that the CFD is precise and affordable tool at the preliminary design stage to obtain maneuverability performance of a marine vehicles.

• Journal of Navigation and Port Research
• /
• v.36 no.9
• /
• pp.707-714
• /
• 2012

Recently, tug boats are widely used for towing a barge which transports building materials, a large block of a ship, offshore crane, and so on. In order to simulate the dynamics of the coupled towing system correctly, the dynamics of the towline should be well modeled. In this paper, the towline was modeled as the multiple finite elements, and each element was assumed as a rigid cylinder which moves in five degrees of freedom except roll. The external tension and its moment acting on each element of the towline were modeled depending on the position vector's direction. Tugboat's motion was simulated in six degrees of freedom where wave and current effects were included, and towed barge was assumed to move in the horizontal plane only. In order to confirm the mathematical models of the coupled towing systems, standard maneuvering trials such as course changing maneuver, turning circle test and zig-zag test were simulated. In addition, the same trials were simulated when the external disturbances like wave and current exist. As the result, it is supposed that the results might be qualitatively reasonable.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.6
• /
• pp.407-414
• /
• 2021

The manoeuvrability of a ship with an unwanted heel angle due to a maritime accident is changed from the original characteristics. The purpose of this study is to quantitatively investigate the change in the manoeuvring performance of a twin-screw ship under various hee angles and speed conditions. A series of free running model test campaigns were performed in the Ocean Engineering Basin of Korea Research Institute of Ships & Ocean Engineering (KRISO) for a twin-screw car ferry vessel. Turning circle test and zig-zag 10/10 and 20/20 tests were carried out on the heel angles of 0, -10, and -19.5 degrees. In addition, two-speed conditions were considered to understand the effect of ship speed. In order to examine the effect of the bilge keel, a heel angle of -22 degree where the bilge keel is exposed outside the water surface, was considered. Finally, the change of manoeuvring characteristics according to the heel angle for a twin-screw and a single-screw vessel is discussed.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.5
• /
• pp.262-270
• /
• 2020

An outdoor free-running model test system was designed for assessing ship maneuverability with test uncertainty. The test model was a surface combatant of tumblehome hull geometry. The straight forward tests were conducted first to obtain the relationship between the propeller revolution rate and advance speed. During the outdoor tests, the propeller revolution rate to achieve a certain Froude number condition was higher than that in the indoor free-running model tests. Turning circle and zigzag tests for evaluating ship maneuverability criteria were carried out at the propeller revolution rate determined by the straight forward test results. The random and systematic standard uncertainties of maneuvering criteria were obtained by repeated tests and comparison with the indoor free-running model test results, respectively. The test uncertainty was largely dominated by the systematic standard uncertainty, while the random standard uncertainty was small with good repeatability.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.71-76
• /
• 2005

Many sea accidents such as collisions and groundings of vessels were occurred due to the lack of sufficient manoeuvring capability of vessels. Therefore IMO adopted 'The interim standards of ship manoeuvrability by Resolution A.751(18) and the standards have been applied to vessels of 100m or more in length and all chemical tankers and gas carriers regardless of the length, which were constructed on or after 1 July 1994. The IMO manoeuvrability standards are divided into three kinds as bellows; (1) Turning capability standards : Estimated values in design stage are to be certified by turning circle test of the actual vessel. (2) Course keeping quality standards : Estimated values in design stage are to be certified by $10^\sqsubset\;and\;20^\sqsubset$ Zig-Zag tests of the actual vessel. (3) Shortest stopping distance standards : Estimated values in design stage are to be certified by the shortest stopping distance tested by the actual vessel. In this paper, the authors computed the values of the manoeuvring standards of several vessels from their original design and compared them with those results from experiments of the model ships and also examined the values and concluded about the validity of IMO Manoeuvrability standards.

• Journal of Navigation and Port Research
• /
• v.29 no.5 s.101
• /
• pp.365-370
• /
• 2005

Many sea accidents such as collisions and groundings of vessels were occurred due to the lack of sufficient manoeuvring capability of vessels. Therefore IMO adopted 'The interim standards of ship manoeuvrability by Resolution A.751(18)' and the standards have been applied to vessels of 100m or more in length and all chemical tankers and gas carriers regardless qf the length, which were constructed on or after 1 July 1994. The IMO manoeuvrability standards are divided into three kinds as bellows; (1) Turning capability standards : Estimated values in design stage are to be certified by turning circle test of the actual vessel. (2) Course keeping quality standards : Estimated values in design stage are to be certified by $10^{\circ}\;and\;20^{\circ}$ Zig-Zag tests of the actual vessel. (3) Shortest stopping distance standards : Estimated values in design stage are to be certified by the shortest stopping distance tested by the actual vessel. In this paper, the authors computed the values of the manoeuvring standards of several vessels from their original design and compared them with those results from experiments of the model ships and also examined the values and concluded about the validity of IMO manoeuvrability standards.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.843-855
• /
• 2020

X-plane submarines show better maneuverability as they have much longer span of control plane than that of cross plane submarines. In this study, captive model tests were conducted to evaluate the maneuverability of an X-plane submarine using Computational Fluid Dynamics (CFD) and a mathematical maneuvering model. For CFD analysis, SNUFOAM, CFD software specialized in naval hydrodynamics based on the open-source toolkit, OpenFOAM, was applied. A generic submarine Joubert BB2 was selected as a test model, which was modified by Maritime Research Institute Netherlands (MARIN). Captive model tests including propeller open water, resistance, self-propulsion, static drift, horizontal planar motion mechanism and vertical planar motion mechanism tests were carried out to obtain maneuvering coefficients of the submarine. Maneuvering simulations for turning circle tests were performed using the maneuvering coefficients obtained from the captive model tests. The simulated trajectory showed good agreement with that of free running model tests. From the results, it was proved that CFD simulations can be applicable to obtain reliable maneuvering coefficients for X-plane submarines.