• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.573-578
• /
• 2019

Anisotropic distribution of the turbulent kinetic energy and the near-field excitations are the main causes of the steady state Flow-Induced Vibration (FIV) which could lead to fretting wear damage in vertically arranged supported slender rods. In this article, a combined Computational Fluid Dynamics (CFD) and Computational Structural Mechanic (CSM) approach named two-way Fluid-Structure Interaction (FSI) is used to investigate the modal characteristics of a typical rod's vibration. Performance of an Unsteady Reynolds-Average Navier-Stokes (URANS) and Large Eddy Simulation (LES) turbulence models on asymmetric fluctuations of the flow field are investigated. Using the LES turbulence model, any large deformation damps into a weak oscillation which remains in the system. However, it is challenging to use LES in two-way FSI problems from fluid domain discretization point of view which is investigated in this article as the innovation. It is concluded that the near-wall meshes whiten the viscous sub-layer is of great importance to estimate the Root Mean Square (RMS) of FIV amplitude correctly as a significant fretting wear parameter otherwise it merely computes the frequency of FIV.

• Wind and Structures
• /
• 제32권3호
• /
• pp.205-217
• /
• 2021

Cold regions with high air density and wind speed attract wind energy producers across the globe exhibiting its potential for wind exploitation. However, exposure of wind turbine blades to such cold conditions bring about devastating impacts like aerodynamic degradation, production loss and blade failures etc. A series of wind tunnel tests were performed to investigate the effect of icing on the aerodynamic properties of wind turbine blades. A baseline clean wing configuration along with four different ice accretion geometries were considered in this study. Aerodynamic force coefficients were obtained from the surface pressure measurements made over the test model using MPS4264 Simultaneous pressure scanner. 3D printed Ice templates featuring different ice geometries based on Icing Research Tunnel data is utilized. Aerodynamic characteristics of both the clean wing configuration and Ice accreted geometries were analysed over a wide range of angles of attack (α) ranging from 0° to 24° with an increment of 3° for three different Reynolds number in the order of 105. Results show a decrease in aerodynamic characteristics of the iced aerofoil when compared against the baseline clean wing configuration. The key flow field features such as point of separation, reattachment and formation of Laminar Separation Bubble (LSB) for different icing geometries and its influence on the aerodynamic characteristics are addressed. Additionally, attempts were made to understand the influence of Reynolds number on the iced-aerofoil aerodynamics.

• 천문학회보
• /
• 제45권1호
• /
• pp.37.1-37.1
• /
• 2020

Cosmic-ray protons (CRp) are efficiently produced at starburst galaxies (SBGs), where the star formation rate (SFR) rate is high. In this talk, we present estimates of gamma-ray and neutrino emissions from nearby SBGs, M82, NGC253, and Arp220. Inside the starburst nucleus (SBN), CRp are accelerated at supernova remnant (SNR) shocks as well as at stellar wind (SW) termination shocks, and their transport is governed by the advection due to starburst-driven wind and diffusion mediated by turbulence. We here model the momentum distributions of SNR and SW-produced CRp with single or a double power-law forms. We also employ two different diffusion models, where CRp are resonantly scattered off large-scale turbulence in SBN or self-excited waves driven by CR streaming instability. We then calculate gamma-ray/neutrino fluxes. The observed gamma-ray fluxes by Fermi-LAT, Veritas, and H.E.S.S are well reproduced with double power-law distribution for SNR-produced CRp and the CRp diffusion by self-excited turbulence. The estimated neutrino fluxes are <~10-3 of the atmospheric neutrino flux in the energy range of Eneutrino <~100 GeV and <~10-1 of the IceCube point source sensitivity in the energy range of Eneutrino >~60 TeV.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권1호
• /
• pp.139-145
• /
• 2001

The objective of experimental study is to apply simultaneous measurement by PIV(Particle Image Velocimetry) to high_speed flow characteristics within ginseng cleaner model. Three different kinds of flow rate(15. 20, 27l/min) are selected as experimental condition. Optimized cross correlation identification to obtain velocity distribution, time-mean velocity distribution, velocity, profile, kinetic energy and turbulence intensity are represented quantitatively for the deeped understanding of the flow characteristics in a ginseng cleaner model.

• Journal of Mechanical Science and Technology
• /
• 제15권12호
• /
• pp.1683-1690
• /
• 2001

A Lagrangian stochastic model is adopted for the calculations of turbulent dispersion in turbulent channel flows. Dispersion of a fluid particle and relative dispersion between two particles released at the sane location are investigated and compared with the classical seating relations for homogeneous turbulence. The viscous effect is realized by adding a Browinian random walk to the calculation of the position of a particle. The near-wall accumulation of particles is examined.

• Smart Structures and Systems
• /
• 제21권5호
• /
• pp.591-600
• /
• 2018

The probabilistic characterization of wind field characteristics is a significant task for fatigue reliability assessment of long-span railway bridges in wind-prone regions. In consideration of the effect of wind direction, the stochastic properties of wind field should be represented by a bivariate statistical model of wind speed and direction. This paper presents the construction of the bivariate model of wind speed and direction at the site of a railway arch bridge by use of the long-term structural health monitoring (SHM) data. The wind characteristics are derived by analyzing the real-time wind monitoring data, such as the mean wind speed and direction, turbulence intensity, turbulence integral scale, and power spectral density. A sequential quadratic programming (SQP) algorithm-based finite mixture modeling method is proposed to formulate the joint distribution model of wind speed and direction. For the probability density function (PDF) of wind speed, a double-parameter Weibull distribution function is utilized, and a von Mises distribution function is applied to represent the PDF of wind direction. The SQP algorithm with multi-start points is used to estimate the parameters in the bivariate model, namely Weibull-von Mises mixture model. One-year wind monitoring data are selected to validate the effectiveness of the proposed modeling method. The optimal model is jointly evaluated by the Bayesian information criterion (BIC) and coefficient of determination, $R^2$. The obtained results indicate that the proposed SQP algorithm-based finite mixture modeling method can effectively establish the bivariate model of wind speed and direction. The established bivariate model of wind speed and direction will facilitate the wind-induced fatigue reliability assessment of long-span bridges.

• Wind and Structures
• /
• 제34권6호
• /
• pp.483-497
• /
• 2022

Three-dimensional (3D) computational fluid dynamics (CFD) analysis of flow around a hipped-roof building representative of UK inland conditions are conducted. Unsteady simulations are performed using three variations of the k-ϵ RANS turbulence model namely, the Standard, Realizable, and RNG models, and their predictive capability is measured against current European building standards. External pressure coefficients and wind loading are found through the BS 6399-2:1997 standard (obsolete) and the current European standards (BS EN 1991-1-4:2005 and A1:20101). The current European standard provides a more conservative wind loading estimate compared to its predecessor and the k-ϵ RNG model falls within 15% of the value predicted by the current standard. Surface shear stream-traces and Q-criterion were used to analyze the flow physics for each model. The RNG model predicts immediate flow separation leading to the creation of vortical structures on the hipped-roof along with a larger separation region. It is observed that the Realizable model predicts the side vortex to be a result of both the horseshoe vortex and the flow deflected off it. These model-specific aerodynamic features present the most disparity between building standards at leeward roof locations. Finally, pedestrian comfort and safety criteria are studied where the k-ϵ Standard model predicts the most ideal pedestrian conditions and the Realizable model yields the most conservative levels.

• 한국수자원학회논문집
• /
• 제52권10호
• /
• pp.697-706
• /
• 2019

다상흐름 모델링 기법과 하이브리드 난류 모델링 기법을 결합한 수치모형을 이용하여 사각형 수로에서의 중력류를 수치모의 하였다. 이 연구에서 적용한 다상흐름 해석기법은 밀도가 큰 중력류 유체, 상대적으로 밀도가 작은 주변류 유체 그리고 자유수면 위에서 흐르는 공기를 3개의 상으로 처리하며, 각 상에 대해서 분리된 흐름 지배방정식을 적용한다. 난류흐름은 벽경계 근처에서는 RANS 모드로 모의하고 벽에서 떨어진 영역에서는 LES 모드로 해석하는 하이브리드 RANS/LES 방법의 일종인 IDDES 기법을 이용하여 해석한다. 이 연구에서 적용한 모델링 기법은 중력류의 머리의 전파속도를 실험값과 일치하게 잘 예측하는 것으로 나타났다. 수치해석 결과는 아울러 낮은 레이놀즈수 난류모형을 이용한 RANS 수치모의에서 이용되는 정도의 격자해상도에서도 큰 규모의 Kelvin-Helmholtz 형식의 경계면 와의 발달과 이들 와가 지속적으로 3차원 형식의 붕괴를 거쳐 작은 난류구조로 분해되면서 난류에너지가 소산되는 현상을 성공적으로 예측함을 보여준다. 적용한 수치모의 기법은 공학적으로 접근 가능한 격자해상도에서 돌출-쪼개짐 흐름 불안정을 동반한 중력류 머리부분의 3차원 거동 특성을 잘 재현하며, 이 결과는 보다 높은 격자해상도에서 구해진 LES 결과에 상응하는 것으로 나타났다. 이 연구결과는 하이브리드 난류모델링 기법과 다상흐름 해석기법을 병합한 수치모형이 자연상태에서 복잡한 중력류의 물리적 거동을 예측하는데 공학적으로 유망한 방법임을 보여준다.

• 대한토목학회논문집
• /
• 제26권6A호
• /
• pp.1013-1022
• /
• 2006

본질적으로 두 개의 I형 거더를 가진 사장교는 공기역학적으로 불리한 특성을 가지고 있음에도 불구하고 경제적으로 유리하기 때문에 최근 우리나라에서 많이 건설되고 있다. 본 논문에서는 두 개의 I형 거더를 가지는 사장교의 실제 조건 하에서의 공기역학적 특성을 평가하기 위하여 영각, 난류강도, 감쇠비를 변화시켜가면서 단면모형실험을 수행하였다. 비틀림 강성이 다른 두 개의 상부 단면 형식이 시공단계 및 완공 후에 대하여 각각 조사되었고 교량의 공기역학적 특성을 향상시키기 위하여 3가지 형식의 페어링이 고려되었다. 연구결과, 전통적인 등류에서의 단면모형실험은 다소 비관적으로 공기역학적 거동을 평가하고 있으며 교량의 바람에 의한 응답은 난류강도와 구조감쇠비에 따라 현저하게 변화하는 것을 확인하였다. 본 연구에서 제시된 페어링은 와류진동 및 버페팅 진동을 감소시켰으며 또한, 플러터의 발생속도도 증가시켰다. 본 연구결과는 두 개의 I형 거더를 가지는 사장교의 내풍설계를 위한 많은 정보를 제공할 수 있을 것으로 기대된다.

• 한국수자원학회논문집
• /
• 제45권4호
• /
• pp.349-360
• /
• 2012

본 연구에서는 3차원 점성 흐름에 적용될 수 있는 비정수압 자유수면 모형을 수평방향 직교 곡선좌표계에서 개발하였다. 개발된 수치모형은 엇갈린 격자를 사용함으로써 발생되는 자유수면에서의 경계조건 종결 문제를 수면층 방정식을 도입하여 해결하였으며, 난류의 유동 해석을 위한 폐합식으로 등방성의 k-${\varepsilon}$ 난류모형을 이용하였다. 본 연구에서 운동량방정식은 이송-확산항만으로 중간단계의 유속을 예측하고, 압력 및 중력을 포함하는 생성항과 연속방정식을 결합하여 다음 시간단계의 유동장을 결정하는 계산 단계 분리법을 이용하였다. 수치모형의 적용성 평가를 위하여 폐쇄된 2차원 수조에서의 취송류, 급경사를 가지는 2차원 수로에서의 흐름, 원심력에 의한 이차류 흐름특성 분석을 위한 3차원 급변 만곡류에 대한 모의를 실시하였다. 수치모의 예측치는 수리모형 실험값과 수위, 유속, 난류특성 등에서 일치하는 양상을 보이는 것이 확인되었다.