• 제목/요약/키워드: Tunneling Work

검색결과 103건 처리시간 0.021초

터널공사현장 근로자의 소음노출 특성 평가 (Exposure Characteristics to Noise Among Tunnel Construction Workers)

  • 김갑배;장재길
    • 한국소음진동공학회논문집
    • /
    • 제23권9호
    • /
    • pp.831-840
    • /
    • 2013
  • The noise levels of workers in tunnel sites are likely to be high because tunneling work places are confined space. However, research on the noise exposure levels of tunneling workers have not been performed intensively due to restricted accessibility to tunnel construction sites. The aim of this study is to evaluate the noise exposure levels for workers engaged in tunneling work sites. Noise dosimeters were used for monitoring workers' noise exposure level in 5 tunneling work sites in accordance with the Notification of the Ministry of Labor. Among 5 tunneling work sites, 4 of them used NATM tunneling method and 1 work site used shield TBM tunneling method. The average noise exposure levels of NATM tunneling workers was 81.1 dB(A) and 15.4 % of the workers' noise level were exposed more than 90 dB(A) which is the exposure limit value. In Shield TBM tunneling method, 4.3 % of the workers were exposed more than 90 dB(A) of noise level, the average noise exposure levels of TBM tunneling workers was 84.1 dB(A).

Investigation of Junction-less Tunneling Field Effect Transistor (JL-TFET) with Floating Gate

  • Ali, Asif;Seo, Dongsun;Cho, Il Hwan
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제17권1호
    • /
    • pp.156-161
    • /
    • 2017
  • This work presents a novel structure for junction-less tunneling field effect transistor (JL-TFET) with a floating gate over the source region. Introduction of floating gate instead of fixed metal gate removes the limitation of fabrication process suitability. The proposed device is based on a heavily n-type-doped Si-channel junction-less field effect transistor (JLFET). A floating gate over source region and a control-gate with optimized metal work-function over channel region is used to make device work like a tunnel field effect transistor (TFET). The proposed device has exhibited excellent ID-VGS characteristics, ION/IOFF ratio, a point subthreshold slope (SS), and average SS for optimized device parameters. Electron charge stored in floating gate, isolation oxide layer and body doping concentration are optimized. The proposed JL-TFET can be a promising candidate for switching performances.

Polyimide LB막내의 탄성 및 비탄성 tunneling 전기전도특성 (Elastic and inelastic electron tunneling characteristics in polyimide LB films)

  • 김태성;김현종
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제7권6호
    • /
    • pp.473-480
    • /
    • 1994
  • The electron tunnel effect in polvimide LB films sandwiched between metal electrodes has been investigated in the present work by a study of both the elastic and inelastic tunneling components. By the results of elastic tunneling experiments in Au/Pl/Au tunneling junction, we can judge the height and thickness of tunnel barrier. The inelastic current in Inelastic Electron Tunneling Spectroscopy(IETS) is due to the interaction of the tunneling electron with the vibrational modes of the molecular species in the barrier. Measurements are done on Au/PI/Pb tunneling junctions. The spectra obtained are the second derivatives of the current-voltage characteristics of these junctions : specifically, d$^{2}$1/dV$^{2}$ as a function of voltage V. Because the energies measured by IETS can be directly compared to those measured by infrared and Raman spectroscopy, IR-RAS spectroscopy also measured for reference.

  • PDF

건설장비에 의한 터널작업의 소음환경 실태 (Noise Generation Characteristic for Tunnel Construction Equipments)

  • 장재길;김갑배
    • 한국소음진동공학회논문집
    • /
    • 제23권9호
    • /
    • pp.841-849
    • /
    • 2013
  • Workers engaged in construction works have been exposed to high levels of noise during their work in tunnels. Noise is one of the major health hazards for employees working in construction sites. The aim of this study is to evaluate the noise levels generating from tunneling equipments such as jumbo drills, backhoes, payloaders, shotcrete machines and service cars. Explosion and turbo fan noises were also monitored. A high precision sound level meter was introduced for measuring LAeq, LAFmax, LAFmin and LCpeak noises in 5 tunneling work sites that were located in Seoul, Kyunggi-do and Kangwon-do areas with NATM and shield methods. The highest noise was recorded by explosion(151.9 dB LCpeak) followed by jumbo drills of higher than 110 dB(A) LAeq. Backhoe normally generated 90~110 dB(A) LAeq while breaking work of rock showed additional around 5~15 dB(A). Noise exposure levels for payloader and shotcrete machine scored more than 90 dB(A) which might be a source of noise-induced hearing loss. Additional research in revealing noise levels from construction equipments operating in tunneling works may enhance the protection of workers who exposed to noise primarily at the sites.

Unlined Tunnel 공법 지보재의 설계 및 시공 기준 고찰 (A Study on the Design/construction Standard of Unlined Tunneling Method)

  • 서영화;김성구;나승훈
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2002년도 가을 학술발표회 논문집
    • /
    • pp.121-134
    • /
    • 2002
  • Tunneling is a very dangerous and expansive work. Especially, the concrete lining works need many long hours and much cost. As an alternative, the unlined tunneling methods including NMT have been developed in various country. These methods have advantages in cost, time and quality. In Korea, many considerations have been conducted to apply the unlined tunneling method in comparatively good rock. Since primary reinforcements play the role of the final supporting system in unlined tunnels, the initial stiffness and long term durability of reinforcements are very important for tunnel safety. To establish the reinforcements standard suitable to Korea, we investigated the foreign standards and construction cases, comparing geological and construction conditions of foreign land and Korea. As the result, we have proposed the standard of primary supporting system for unlined tunnel in aspects of material, design, construction and quality control etc.

  • PDF

STM을 이용한 Dipyridinium 유기 단분자막의 모폴로지 관찰 및 전기적 특성 연구 (Study on the Mophology Observation and Electrical Properties of Dipyridinium Organic Monolayer Using STM)

  • 이남석;신훈규;권영수
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제54권2호
    • /
    • pp.51-54
    • /
    • 2005
  • In this work, the attempt has been made to investigate the morphology of self-assembled dipyridinium dithioacetate on Au(111) substrate by Scanning Tunneling Microscopy(STM). Also, we measured electrical properties(I-V) using Scanning Tunneling Spectroscopy(STS). Sample used in this experiment is dipyridinium dithioacetate, which contains thiol functional group, this structure that can be self-assembled easily to Au(111) substrate. The self-assembly procedure was used for two different concentrations, 0.5 mM/ml and 1 mM/ml. Dilute density of sample by 0.5 mM/ml, 1 mM/ml and observed dipyridinium dithioacetate's image by STM after self-assembled on Au(111) substrate. The structure of STM tip-SAMs-Au(111) substrate has been used measurement for electrical properties(I-V) using STS. The current-voltage(I-V) measurement result, observed negative differential resistance(NDR) properties.

단일 양자 우물 구조로 된 밴드간 공명 터널링 다이오드의 전류-전압 특성 (I-V characteristics of resonant interband tunneling diodes with single quantum well structure)

  • 김성진;박영석
    • 전자공학회논문지D
    • /
    • 제34D권4호
    • /
    • pp.27-32
    • /
    • 1997
  • In resonant tunneling diodes with the quantum well structure showing the negative differential resistance (NDR), it is essential to increase both the peak-to-valley current ratio (PVCR) and the peak current desnity ( $J_{p}$) for the accurate digital switching operation and the high output of the device. In this work, a resonant interband tunneling diode (RITD) with single quantum well structure, which is composed of I $n_{0.47}$As/I $n_{0.52}$A $l_{0.48}$As heterojunction on the InP substrate, is fabricated ot improve PVCR and JP, and then the dependence of I-V charcteristics on the width of the quantum well was investigated.d.ted.d.

  • PDF

단일양자 우물구조로 된 InGaAs/InAlAs의 밴드간 공명 터널링 다이오드에 관한 연구 (InGaAs/InAIAs resonant interband tunneling diodes(RITDs) with single quantum well structure)

  • 김성진;박영석;이철진;성영권
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1996년도 하계학술대회 논문집 C
    • /
    • pp.1456-1458
    • /
    • 1996
  • In resonant tunneling diodes with the quantum well structure showing the negative differential resistance (NDR), it is essential to increase both the peak-to-valley current ratio (PVCR) and the peak current density ($J_p$) for the accurate switching operation and the high output of the device. In this work, a resonant interband tunneling diode (RITD) with single quantum well structure, which is composed of $In_{0.53}Ga_{0.47}As/ln_{0.52}Al_{0.48}As$ heterojunction on the InP substrate, is suggested to improve the PVCR and $J_p$ through the narrowed tunnel barriers. As the result, the measured I-V curves showed the PVCR over 60.

  • PDF

Adsorption Structure and Doping Effect of Azidotrimethyltin on Graphene

  • 양세나;최정헌;김기정;김세훈;이한길
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
    • /
    • pp.181-181
    • /
    • 2011
  • The adsorption structure and the electronic property of azidotrimethyltin (ATMT) on monolayer graphene was investigated using scanning tunneling microscopy and core-level photoemission spectroscopy. We also confirmed the n-type doping effect by scanning tunneling spectroscopy and work function measurements. We will systematically demonstrate the variation of characteristic of graphene induced by the chemical functionalized molecule as we confirmed the results using scanning tunneling microscopy in conjunction with core-level photoemission spectroscopy.

  • PDF