• Journal of the Korean Geotechnical Society
• /
• v.19 no.2
• /
• pp.267-278
• /
• 2003

Artificial neural networks are efficient computing techniques that are widely used to solve complex problems in many fields. In this study, in order to predict tunnel-induced ground movements, Tunnel Behavior Prediction System (TBPS) was developed by using these artificial neural networks model, based on a Held instrumentation database (i.e. crown settlement, convergence, axial force of rock bolt, compressive and shear stress of shotcrete, stress of concrete lining etc.) obtained from 193 location data of 31 different tunnel sites where works are completed. The study and test of the network were performed by Back Propagation Algorithm which is known as a systematic technique for studying the multi-layer artificial neural network. The tunnel behaviors predicted by TBPS were compared with monitored data in the tunnel sites and numerical analysis results. This study showed that the values obtained from TBPS were within allowable limits. It is concluded that this system can effectively estimate the tunnel ground movements and can also be used f3r tunneling feasibility study, and basic and detailed design and construction of tunnel.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.4
• /
• pp.373-379
• /
• 2002

We investigated the evolution of magnetoresistance and magnetic property of tunneling magnetoresistive(TMR) device with microstructure and plasma oxidation time. TMR devices have potential applications for non volatile MRAM and high density HDD reading head. We prepared the tunnel magnetoresistance(TMR) devices of Ta($50{\AA}$)/NiFe($50{\AA}$)/IrMn($150{\AA}$)/CoFe($50{\AA}$)/Al($13{\AA}$)-O/CoFe($40{\AA}$)/FiFe($400{\AA}$)/Ta(($50{\AA}$) structure which have $100{\times}100\mu\textrm{m}^2$ junction area on $2.5{\times}2.5\textrm{cm}^2$ Si/$SiO_2$(($1000{\AA}$) substrates by an inductively coupled plasma(ICP) magnetron sputter. We fabricated the insulating layer using an ICP plasma oxidation method by with various oxidation time from 30 sec to 360 sec, and measured resistances and magnetoresistance(MR) ratios of TMR devices. We found that the oxidized sample for oxidation time of 80 sec showed the highest MR radio of 30.31 %, while the calculated value regarding inhomogeneous current effect indicated 25.18 %. We used transmission electron microscope(TEM) to investigate microstructural evolution of insulating layer. Comparing the cross-sectional TEM images at oxidation time of 150 sec and 360 sec, we found that the thickness and thickness variation of 360 sec-oxidized insulating layer became 30% and 40% larger than those of 150 sec-oxidized layer, repectively. Therefore, our results imply that increase of thickness variation with oxidation time may be one of the major treasons of the MR decrease.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.4
• /
• pp.253-259
• /
• 2019

In this case report, gingival recession of the mandibular anterior teeth was treated with a laterally closed tunnel technique. Two patients had altered the inclination of mandibular anterior tooth during past orthodontic treatment and had periodontal thin biotype. The recipient site was formed by tunneling method, and the connective tissue graft obtained from the palatal side was placed in the tunnel, and the margins of flap were gathered at the center of the root and sutured. Despite the thin periodontal biotype, the root coverage was successfully obtained, keratinized gingiva was increased, and aesthetics were achieved by harmonizing with surrounding tissues in terms of shape and color.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.229-234
• /
• 1999

We analyzed the reliability characteristics in platinum schottky diodes with variations of n-type silicon substrates concentrations and temperature variations of measurements. The parameters of reliability measurement analysis are saturation current. turn-on voltage and ideality factor in the forward bias, the breakdown voltage in the reverse bias with device shapes. The shape of devices are square type and long rectangular type for edge effect. As a result, we analyzed that the forward turn-on voltage, barrier height, dynamic resistance and reverse breakdown voltage were decreased but ideality factor and saturation current were increased by increased concentration in platinum and n-silicon junction parts. In measurement temperature(RT, $50^{\circ}C$, $75^{\circ}C$), the extracted electrical parameter values of reliability characteristics were increased at the higher temperature under the forward and reverse bias. The long rectangular type devices were more decreased than the square type in reverse breakdown voltage by tunneling effects of edge part.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1117-1124
• /
• 2010

PMIPv6 is a network-based mobility support scheme, proposed and standardized by NetLMM WG of IETF. It is proposed to solve problems of conventional mobility schemes, and to improve inefficiency of those. The standard document describes network components and detailed procedures to provide mobility to MN. But it describes only a handover procedure between MAGs, not between LMAs. In order to support seamless connectivity of MN efficiently, a handover procedure between LMAs is necessary. The proposed scheme in this paper utilizes a route optimization procedure to prevent inefficiency of inter-LMA tunneling scheme. At the same time, the proposed scheme utilizes a pre-authentication scheme to reduce handover latency. According to the result of performance evaluations, the proposed scheme greatly reduces handover latency, compared to conventional mobility support schemes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.3
• /
• pp.519-525
• /
• 2014

In this paper, we show a scheme to directly access DLNA network with the 3G/4G communication module of a smartphone in home or office environment. By exploiting this scheme, end users can use DLNA service more conveniently regardless of the type of activated communication module in a smartphone. For the implementation of this scheme, we use a femtocell that is a basestation with small coverage. A problem caused by the IP address hierarch discrepancy between the IP address of 3G/4G module of smartphone and those of local network nodes is resolved by deploying local IP address scheme. The processing of multicasting packet, that is required in DLNA service, is enabled by using IP tunneling scheme. As a result, end user can access DLNA network regardless of the type of activated wireless communication module. We validate the design result by implementing it on a commercial WCDMA femtocell.

• Journal of KIISE:Information Networking
• /
• v.29 no.1
• /
• pp.15-23
• /
• 2002

We present a new MDA-based Mobile-IPv6 multicast routing algorithm for wirelese service operators to offer Mobile-IP over IMT-2000 service under IMT-2000 network by taking advantage of the existing infrastructure for IMT-2000 multimedia application services. The extended IMT-2000 system architectures use an PDSNs (i.e. IWFs), and the home network (i.e. Internet) backbone and intermediate network are composed of ATM entities. A key feature of the new protocol is the use of MDA(Multicast Delivery Agent) to reduce delivery path length of the multicast datagram. We show that proposed protocol is efficient in terms of various performance measures such as multicast traffic load, multicast related handoff, and average routing length when we implement it using the Mobile-IPv6. Particularly, the number of tunneling and average routing length of datagram are reduced relatively, the multicast traffic load is also decreased.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.6B
• /
• pp.533-543
• /
• 2003

Recently, according to the rapid increase of Web users, various kinds of Web applications have been being developed. Hence, Web QoS(Quality of Service) becomes a critical issue in the Web services, such as e-commerce, Web hosting, etc. Nevertheless, most Web servers currently process various requests from Web users on a FIFO basis, which can not provide differentiated QoS. This paper presents two approaches to provide differentiated Web QoS. The first is the kernel-level approach, which is adding a real-time scheduling processor to the operating system kernel to maintain the priority of user requests determined by the scheduling processor of Web server. The second is the load-balancing approach, which uses If-level masquerading and tunneling technology to improve reliability and response speed upon user requests.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.2
• /
• pp.87-98
• /
• 2012

In recent years, there are many data and multimedia services that are supported by WiFi-enabled mobile devices. As a result, the demand for the ability to connect to the Internet anywhere is rapidly increasing and network infrastructure is becoming increasingly important. The design of cost-efficient network mobility (NEMO) protocol is intended to reduce the demand for limited wired/wireless network bandwidth at the signaling of mobility support and packet delivery operations. In this paper, we propose a cost-effective inter-LMA domain mobility management scheme which provides fast handover with multicasting support in NEMO environments. And our Fast PR-NEMO scheme is compared with N-PMIPv6, rNEMO, and PR-NEMO. In conclusion, our proposed scheme shows the best performance in terms of location updating cost, and packet tunneling cost.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1844-1846
• /
• 2005

The characteristic of negative differential resistance(NDR) is decreased current when the applied voltage is increased. The NDR is potentially very useful in molecular electronics device schemes. Here, we investigated the NDR property of self-assembled 4,4- Di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene, which has been well known as a conducting molecule. Self-assembly monolayers(SAMs) were prepared on Au(111), which had been thermally deposited onto pre-treatment$(H_2SO_4:H_2O_2=3:1)$ Si. The Au substrate was exposed to a 1mM/l solution of 1-dodecanethiol in ethanol for 24 hours to form a monolayer. After thorough rinsing the sample, it was exposed to a $0.1{\mu}M/l$ solution of 4,4-Di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene in dimethylformamide(DMF) for 30 min and kept in the dark during immersion to avoid photo-oxidation. After the assembly, the samples were removed from the solutions, rinsed thoroughly with methanol, acetone, and $CH_2Cl_2$, and finally blown dry with $N_2$. Under these conditions, we measured electrical properties of self-assembly monolayers(SAMs) using ultra high vacuum scanning tunneling microscopy(UHV-STM). The applied voltages were from -2V to +2V with 299K temperature. The vacuum condition is $6{\times}10^{-8}$ Torr. As a result, we found the NDR voltage of the nitro-benzene is $-1.61{\pm}0.26$ V(negative region) and $1.84{\pm}0.33$ (positive region), respectively.