• 한국산학기술학회논문지
• /
• 제4권3호
• /
• pp.274-278
• /
• 2003

터널의 3차원 해석을 통한 발파진동 평가시에 최대진동속도를 산정하기 위해 구조물 하부에서의 진동응답이 감소하는 터널직경의 3D위치까지의 경계를 설정하여 수치해석을 수행하였다. 구조물하부에서 터널발파시 진동성분이 장약으로부터 구형형상으로 전파되어나갈 때 구조물에서 발파막장의 거리가 터널직경의 약 1-2배일 때 최대진동속도를 나타내었으며, 수치해석시에는 속도성분영역을 확인하여 정확한 구형의 발파진동속도영역의 산정이 중요한 것으로 나타났다. 또한, 속도성분과 기존의 발파진동전파식을 비교한 결과 터널심도 15m, 25m일 경우에는 유사하게 나타났으나, 터널심도 35m일 경우에는 기존 발파진동전파식과는 상당한 차이를 보이므로 터널심도가 터널직경의 5배 이상일 경우에는 기존발파진동전파식에 의한 속도성분이 수치해석에 비해 과다하게 산정됨을 알 수 있었다.

• 한국해안·해양공학회논문집
• /
• 제23권2호
• /
• pp.139-146
• /
• 2011

충격쇄파압은 권파성 파랑이 구조물 전면에 갑자기 충돌할 때 발생하며 접촉면에서 공기포켓의 생성여부에 따라 충격쇄파압의 작용특성이 달라진다. 수괴의 직접적인 충돌에 따른 Wagner형은 접촉면에서 단일 압력 첨두치를 보이는 반면, Bagnold형은 공기포켓의 진동에 의하여 비접촉면에서도 압력의 첨두치를 보이는 특성이 있다. 본 연구에서는 시공 중의 수중터널 벌크헤드의 배면(육측면)에 발생하는 충격쇄파압을 고찰하였다. Navier-Stokes 방정식을 직접 푸는 수치해석을 적용하여 벌크헤드 인근에 발생하는 쇄파를 모의한 결과, 벌크헤드의 배면에서 강한 Bagnold형 충격쇄파압이 발생함을 확인하였다. 본 충격쇄파압의 존재는 동일 조건에 대하여 수행한 수리모형실험에 의해서도 확인되었으며, 실험결과와 수치해석결과가 대체적으로 유사한 성향을 보임을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제36권3호
• /
• pp.233-240
• /
• 2023

p-type Tunnel Oxide Passivating Contacts (TOPCon) solar cell is fabricated with a poly-Si/SiO_x structure. It simultaneously achieves surface passivation and enhances the carriers' selective collection, which is a promising technology for conventional solar cells. The quality of passivation is depended on the quality of the tunnel oxide layer at the interface with the c-Si wafer, which is affected by the bond of SiO formed during the subsequent annealing process. The highest cell efficiency reported to date for the laboratory scale has increased to 26.1%, fabricated by the Institute for Solar Energy Research. The cells used a p-type float zone silicon with an interdigitated back contact (IBC) structure that fabricates poly-Si and SiO_x layer achieves the highest implied open-circuit voltage (iV_oc) is 750 mV, and the highest level of edge passivation is 40%. This review presents an overview of p-type TOPCon technologies, including the ultra-thin silicon oxide layer (SiO_x) and poly-silicon layer (poly-Si), as well as the advancement of the SiO_x and poly-Si layers. Subsequently, the limitations of improving efficiency are discussed in detail. Consequently, it is expected to provide a basis for the simplification of industrial mass production.

• 신재생에너지
• /
• 제9권1호
• /
• pp.60-68
• /
• 2013

In recent years, green house effect related natural disasters occur throughout the world. Carbon dioxide, mainly comes from the fossil fuel burning, is suspected to be the cause of green house effect. To reduce the emission of carbon dioxide, we need to find alternative energy resources such as photovoltaic energy. In this paper, the basic characteristics of wind force coefficient on a PV panel installed on the floating type PV energy generation system are investigated though the two-dimensional wind tunnel tests. Test variables included the angle of PV panel, direction of wind, number of rows of PV panel and attached or not attached frame. Based on the results obtained through the wind tunnel tests, it was found that the wind force coefficient can be used as a preliminary data in the design of the structure.

• 국제강구조저널
• /
• 제18권4호
• /
• pp.1191-1199
• /
• 2018

Concepts of submerged floating tunnels (SFTs) for land connection have been continuously suggested and developed by several researchers and institutes. To maintain their predefined positions under various dynamic environmental loading conditions, the submerged floating tunnels should be effectively moored by reasonable mooring systems. With rational mooring systems, the design of SFTs should be confirmed to satisfy the structural safety, fatigue, and operability design criteria related to tunnel motion, internal forces, structural stresses, and the fatigue life of the main structural members. This paper presents a feasibility study of a submerged floating tunnel moored by an inclined tendon system. The basic structural concept was developed based on the concept of conventional cable-stayed bridges to minimize the seabed excavation, penetration, and anchoring work by applying tower-inclined tendon systems instead of conventional tendons with individual seabed anchors. To evaluate the structural performance of the new type of SFT, a hydrodynamic analysis was performed in the time domain using the commercial nonlinear finite element code ABAQUS-AQUA. For the main dynamic environmental loading condition, an irregular wave load was examined. A JONSWAP wave spectrum was used to generate a time-series wave-induced hydrodynamic load considering the specific significant wave height and peak period for predetermined wave conditions. By performing a time-domain hydrodynamic analysis on the submerged floating structure under irregular waves, the motional characteristics, structural stresses, and fatigue damage of the floating tunnel and mooring members were analyzed to evaluate the structural safety and fatigue performance. According to the analytical study, the suggested conceptual model for SFTs shows very good hydrodynamic structural performance. It can be concluded that the concept can be considered as a reasonable structural type of SFT.

• 한국전산구조공학회논문집
• /
• 제34권5호
• /
• pp.309-317
• /
• 2021

이 논문에서는 박스형 전력구의 지진응답해석에 사용되는 응답진도법의 보수성을 평가하였다. 이를 위해 25가지 전력구 단면과 각 전력구에 대한 2개의 지반조건을 고려한 총 50개 예제를 선정하였다. 응답진도법의 보수성을 평가하기 위해 동적 지반-구조물 상호작용을 고려한 정밀해석법에 의한 응답과 비교하였다. 비교결과, 정밀해석 응답에 대한 응답진도법에 의한 응답의 비로 정의한 응답비의 평균이 1.0에 근접하며, 응답비의 표준편차도 5% 이내로 매우 작아서, 응답진도법에 의한 해석이 정밀해석법과 일관됨을 알 수 있었다. 마지막으로 응답진도법에 의한 응답에 하중계수 1.1을 적용하면 전력구의 보수적인 내진설계가 가능할 것으로 나타났다.

• 터널과지하공간
• /
• 제31권4호
• /
• pp.211-220
• /
• 2021

한국의 대심도 (>40m 깊이) 터널 공사 시에 터널 붕괴 사고가 종종 일어나고 있으며, 도심지 지하공간의 얕은 심도에 인공적으로 조성된 지반에는 자연 공동뿐만 아니라 상수도관, 하수도관, 전력구 및 지하철 건설로 인한 인위적인 공동들이 복잡하게 분포되어 있다. 대심도 터널 굴착을 위해서는 이러한 다공질의 특성을 보이는 다양한 지반의 특성 및 지질구조가 지반의 안전에 미치는 영향을 이해하여야 한다. 본 연구는 국내외 사례를 바탕으로 한국의 대심도 굴착에서 암반의 위험 산정을 위한 위험 인자를 분석하였다. 연구결과, 대심도 터널 굴착시 지반의 안정성에 영향을 주는 총 7개의 카테고리들과 총 38개의 인자들이 도출되었다. 가중치가 상대적으로 높은 인자들은 단층 및 단층점토, 차응력, 암종, 지하수 및 머드 유입, 암석의 일축압축강도, 터널 단면의 크기, 터널 상부 암반의 두께, 카르스트 및 계곡지형, 습곡, 석회암의 협재, 지하수위 변동, 터널 심도, 암맥, RQD, 절리 특성, 이방성, 암반파열(rockburst) 등으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제76권2호
• /
• pp.269-278
• /
• 2020

In this paper, the mechanical characteristics of the open type hyperbolic-parabolic membrane structure under wind load were investigated. First, the numerical simulation of a typical plane membrane structure was performed based on the Large-Eddy Simulation method. The accuracy of the simulation method was validated by the corresponding wind tunnel test results. Then, the wind load shape coefficients of open type hyperbolic-parabolic membrane structures are obtained from the series of numerical calculations and compared with the recommended values in the "Technical Specification for Membrane Structures (CECS 158: 2015). Finally, the influences of the wind directions and wind speeds on the mean wind pressure distribution of open type hyperbolic-parabolic membrane structures were investigated. This study aims to gain a better understanding of the wind-induced response for this type of structure and be useful to engineers and researchers.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.406-406
• /
• 2016

To get high efficiency n-type crystalline silicon solar cells, passivation is one of the key factor. Tunnel oxide (SiO2) reduce surface recombination as a passivation layer and it does not constrict the majority carrier flow. In this work, the passivation quality enhanced by different chemical solution such as HNO3, H2SO4:H2O2 and DI-water to make thin tunnel oxide layer on n-type crystalline silicon wafer and changes of characteristics by subsequent annealing process and firing process after phosphorus doped amorphous silicon (a-Si:H) deposition. The tunneling of carrier through oxide layer is checked through I-V measurement when the voltage is from -1 V to 1 V and interface state density also be calculated about $1{\times}1012cm-2eV-1$ using MIS (Metal-Insulator-Semiconductor) structure . Tunnel oxide produced by 68 wt% HNO3 for 5 min on $100^{\circ}C$, H2SO4:H2O2 for 5 min on $100^{\circ}C$ and DI-water for 60 min on $95^{\circ}C$. The oxide layer is measured thickness about 1.4~2.2 nm by spectral ellipsometry (SE) and properties as passivation layer by QSSPC (Quasi-Steady-state Photo Conductance). Tunnel oxide layer is capped with phosphorus doped amorphous silicon on both sides and additional annealing process improve lifetime from $3.25{\mu}s$ to $397{\mu}s$ and implied Voc from 544 mV to 690 mV after P-doped a-Si deposition, respectively. It will be expected that amorphous silicon is changed to poly silicon phase. Furthermore, lifetime and implied Voc were recovered by forming gas annealing (FGA) after firing process from $192{\mu}s$ to $786{\mu}s$. It is shown that the tunnel oxide layer is thermally stable.

• 한국가시화정보학회지
• /
• 제19권3호
• /
• pp.136-142
• /
• 2021

Submerged and semi-submerged vehicles expel cooling water through an outlet. In this process, induced noise and vibration by the flow around the outlet have been reported, and it may cause problems directly related to survivability of the navy vessels. The coolant outlet has a net-type structure and circular columns are mostly used. In this study, flow measurements using PIV and LDV were performed for different type outlets; conventional (flat plate with round bar) and improved (flat and flat plate) configurations. Experiments were conducted at a cavitation tunnel where pressure and steady flow rate conditions are ensured for sufficient time to measure the flow. The average velocity field of the outlets were measured and compared through LDV measurements, and instantaneous vorticities were evaluated through PIV measurements. The results show that the improved type of the outlet is advantageous in terms of flow stability compared to the conventional type of the outlet.