• Korean Journal of Hydrosciences
• /
• 제7권
• /
• pp.37-49
• /
• 1996

This study aims at suggesting an alternative to improve flood controling capacity according to the cument design criteria for the existing Soyanggang Multi-purpose Dam which was constructed 20 years ago as the largest dam in Korea. The peak inflow of the adopted probable maximum flood (PMF) at the time of construction was 13,500 $m^3$/s. However, the newly estimated peak inflow of the PMF is 18,000 $m^3$/s which is 1.34 times bigger than the original one. This is considered to be due to the accumulation of the reliable flood and storm event records after construction, and due to the increasing tendency of the local flood peaks according to the influence of world-wide weather change. The new estimation of the probable maximum precipitation (PMP) was based on the hydro-meteorological method suggested by the guideline of the World Meteorological Organization (WMO). The unit hydrograph which was applied for the estimation of PMF was derived through linear programming algorithm by minimizing the sum of absolute deviations of the calculated and recorded flood hydrographs. In order to adopt the newly estimated PMF as a design flood, following four alternatives were compared : (1) allocation of more flood control space by lowering the normal high water level, (2) construction of a new spillway in addition to the existing spillway, (3) construction of a new dam which has relevant flood control storage at the upstream of the Soyanggang dam, (4) raising the existing dam crest. The preliminary evaluation of these alternatives resulted in that the second alternative is most economic and feasible. So as to stably cope with the newly estimated PMF by meeting all the current functions of the multipurpose dam, a detailed study of an additional spillway tunnel has to be followed.

• 터널과지하공간
• /
• 제14권2호
• /
• pp.79-85
• /
• 2004

수로터널은 일반적으로 상수 및 용수를 도수할 목적으로 설치하는 터널로서 기능상 여러가지로 분류할 수 있으나, 도로, 철도, 지하철 같은 교통터널(transportiontunnel)과는 달리 터널내에 수압의 작용이 반복되는 특징이 있으며, 이를 기본으로 하여 내수압의 작용 유무에 따라 자유수면(무압터널)터별과 압력터널로 분류된다(Fig. 1. 참조). 또한, 용도에 따라 상하수도 터널, 발전용 터널, 여수로(spillway) 터널, 가배수(diversion) 터널 및 방류(outlet) 터널로 분류되고 있다. 본 고에서는 이러한 수로터널 중 터널식 여수로에서 발생할 수 있는 공동현상(cavitation)에 대하여 발생원 인과 대처방안 및 피해사례에 대하여 정리하고자 한다.(중략)

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1285-1289
• /
• 2008

Increasing the flood control capacity's link that is enforcing to existing dam by unusual change of weather, While build planing construction by exiting spillway of tunnel type to dam, could know that part bed rock is formed as is different with design. Grasped topography of research area and geology state to definite distribution aspect of different bed rock, Place that achieved Surface geological Survey and correct Survey is difficult in some section enforced Electrical resistivity dipole-dipole investigation. Grasped stratigraphy distribution confirmation and fracture or weathering zone making out siding 2D-Resistivity Electrical resistivity diagram and Reverse analysis diagram, examining closely soil weathered rock rock's distribution state, established stability countermeasure plan

• 물과 미래
• /
• 제28권3호
• /
• pp.187-195
• /
• 1995

본 연구의 목적은 20년 전에 건설 완료된 우리나라 최대 다목적댐인 소양강 다목적댐의 치수능력을 재검토하여 그 대안을 제시하는데 있다. 최악의 기상조건을 고려하여 수문 기상학적 방법으로 산정한 소양강 다목적댐유역의 72시간 지속 가능 최대 강수량(PMP, probable maximum precipitation)은 760.0mm 이며 재산정된 가능 최대 홍수량(PMF, probable maximum flood)은 18,100$m^3$/s이다. 이는 댐 계획 당시 1,000년 빈도 홍수량의 최대치 13,500$m^3$/s 보다 1.34배 크게 나타났다. 가능 최대 홍수량을 설계 홍수량으로 채택할 경우의 4개 대안; 1) 하수 제한수위를 낮추는 안, 2) 비상 여수로를 추가하는 안, 3)기존 댐을 증고시키는 안, 4) 상류에 홍수조절용댐을 건설하는 안 등을 검토한 결과 경제성과 치수 관리 능력 효율면에서 소양강 다목적댐의 수문학적 안정성을 도모할 수 있는 최적의 개선 방안은 비상 여수로를 추가하는 안으로 판단된다. 따라서 현 여수로에 부가하여 비상 여수로를 추가하는 방안이 보다 더 구체적으로 검토되어야 할 것이다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.869-887
• /
• 2008

Coffer dam for tunnel type spillway in inflow section of Dae-am dam was originally planned as 2 lines sheet piles with Water Zet method. But, the result of pilot test was caused of some problems that vibration during installation of pile could pollute water and water leakage could the lower part. So, sheet piles was not satisfactory for faculty of coffer dam. Structural instability of sheet pile system need to reinforcement. Characteristic of Dae-am dam was small reservoir capacity but wide drainage area, of which it was judgment that security of leakage and stability was difficult during excavation of inlet part. So, we consider that water curtain method utilized with in site pouring concrete pile method was designed at weir part of spillway. We were known about basement rock that geological boring was carried out in weir part. After taking a deep consideration, PRD method was accepted as a new method. Concrete pile by PRD was installed to below country rock. CJM method was carried out with PRD. After making concrete wall using Top-down method, earth anchors were installed for supporting it. According to the result of numerical analysis, as water level rises, wall is stable.

• 한국지반환경공학회 논문집
• /
• 제12권7호
• /
• pp.5-12
• /
• 2011

터널의 지보패턴 선정 시 지표지질조사, 시추조사, 물리탐사 및 실내암석 시험 등의 결과로부터 암질을 파악하고 암반분류법, 국내 외 시공사례, 수치해석 등을 종합적으로 고려하여 암반등급을 구분하고 등급별 굴착공법 및 표준지보패턴을 설계하게 된다. 개정된 터널설계기준에 의하면 터널 설계를 위한 암반등급은 RMR을 바탕으로 등급별로 구분할 것을 권장하고 있으며, 필요할 경우 보다 세분화된 등급구분과 Q분류법 적용을 허용하는 등 탄력적인 기준을 제시하고 있다. 또한, 터널건설 시 구조물과 지반의 거동에 영향을 미치는 인자는 주로 지반자체의 특성, 지하수, 그리고 구조물 재료의 특성 등 불확실한 요소들이 주요 인자들이므로 터널 설계 시 지보패턴의 적정성 검증은 반드시 수반되어야 하며, 오늘날 이러한 검증방법 역시 다양화되고 전문화 되어가는 실정이다. 본 연구에서는 임하댐 비상여수로 터널에 대해 RMR과 Q값에 의한 지보패턴의 선정의 적정성을 경험적 방법 및 수치해석을 통한 분석과 현장 실측자료와의 비교 분석을 시행하여 검증하였다.

• Structural Engineering and Mechanics
• /
• 제63권1호
• /
• pp.47-53
• /
• 2017

The fundamental goal of this study is to minimize the uncertainty of the median fragility curve and to assess the structural vulnerability under earthquake excitation. Bayesian Inference with Markov Chain Monte Carlo (MCMC) simulation has been presented for efficient collapse response assessment of the independent intake water tower. The intake tower is significantly used as a diversion type of the hydropower station for maintaining power plant, reservoir and spillway tunnel. Therefore, the seismic fragility assessment of the intake tower is a pivotal component for estimating total system risk of the reservoir. In this investigation, an asymmetrical independent slender reinforced concrete structure is considered. The Bayesian Inference method provides the flexibility to integrate the prior information of collapse response data with the numerical analysis results. The preliminary information of risk data can be obtained from various sources like experiments, existing studies, and simplified linear dynamic analysis or nonlinear static analysis. The conventional lognormal model is used for plotting the fragility curve using the data from time history simulation and nonlinear static pushover analysis respectively. The Bayesian Inference approach is applied for integrating the data from both analyses with the help of MCMC simulation. The method achieves meaningful improvement of uncertainty associated with the fragility curve, and provides significant statistical and computational efficiency.