• 전자공학회논문지SC
• /
• 제41권1호
• /
• pp.17-24
• /
• 2004

본 논문은 2차 시스템에서 시간영역의 설계 사양을 만족하는 최적 강인 LQ-PID 제어기 설계방법을 제안한다. LQ-PID제어기 동조파라미터들은 시간영역의 설계사양인 오버슈트와 정착시간의 설계파라미터들과 LQR의 가중치요소 Q와 R의 관계에 의해서 설계될 수 있었다. 그래서 안정도-강인성뿐만 아니라 시간영역에서의 성능-강인성을 이룰 수 있었다.

• 전기학회논문지
• /
• 제57권3호
• /
• pp.518-526
• /
• 2008

The fuzzy self-tuning PID controller is a PID controller with a fuzzy logic mechanism for tuning its gains on-line. In this structure, the proportional, integral and derivative gains are tuned on-line with respect to the change of the output of system under control. This paper deals with two types of fuzzy self-tuning PID controllers, rule-based fuzzy PID controller and learning fuzzy PID controller. As a medical application of fuzzy PID controller, the proposed controllers were implemented and evaluated in a laparoscopic surgery robot system. The proposed fuzzy PID structures maintain similar performance as conventional PID controller, and enhance the position tracking performance over wide range of varying input. For precise approximation, the fuzzy PID controller was realized using the linear reasoning method, a type of product-sum-gravity method. The proposed controllers were compared with conventional PID controller without fuzzy gain tuning and was proved to have better performance in the experiment.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.351-354
• /
• 2001

In this paper, we present self-tuning control of switched reluctance motor for maximum torque with phase current and shaft position sensor. Determination method of turn-on/off angle is realized by using self-tuning control method. During the sampling time, micro-controller checks the number of pulse from encoder and compare with the number of pre-checked pulse. After micro-controller calculates between two data, it moves forward or backward turn-off angle. When the turn-off angle is fixed optimal turn-off angle, the turn-on angle automatically moves forward or backward by a step using self-tuning control method. And then, optimal turn-off angle is searched once again. As such a repeating process, turn-on/off angle is moved automatically to obtain the maximum torque. The experimental results are presented to validate the self-tuning algorithm.

• 한국생산제조학회지
• /
• 제23권3호
• /
• pp.318-324
• /
• 2014

Recent years have witnessed a growing demand for a wide variety of high-performance industrial robots. In this paper, for accurate gain tuning of a 6-axis articulated industrial robot with reduced noise, a program routine for a dynamic signal analyzer (DSA) using the frequency response method will be programmed using $LabVIEW^{(R)}$. Then, robot transfer functions can be obtained experimentally using the frequency response method with the DSA program. Data from the robot transfer functions are transformed into Bode plots, based on which an optimal gain tuning will be executed. Gain tuning can enhance the response quality of the output signal for a given input signal during real-time control of the robot. The effectiveness of our proposed technique will be verified by implementation with a (lab-manufactured) 6-axis articulated industrial robot (hereinafter called "RS2") and comparison with the zero position gain tuning, as well as other positions.

• Journal of Photoscience
• /
• 제10권3호
• /
• pp.257-261
• /
• 2003

We have systematically studied the evolution of the photoluminescence(PL) tuning of porous silicon(PS) by electrochemical etching in various mixed electrolytes. The electrolytes employed as an etchants were mixtures of HF:CH$_3$COOH:HNO$_3$:C$_2$H$\_$5/OH solutions where the composition ratios (%) were varied from 10:1.98:0:88.02 to 10: 1.98:8.4:79.62 under constant concentration of HF and CH$_3$COOH with a total volume of 100 ml. Changes in the surface morphology of the samples caused by variations in the etching process were investigated by scanning electron microscopy (SEM) and atomic force microscopy (AFM). After samples are etched in various mixed electrolytes, FTIR analyses show that there is the non-photoluminescent state and the photoluminescent state simultaneously. The PL spectra show the PL tuning in the ranging from 560 to 700 nm with the increase of HNO$_3$ concentration. An analysis of the subsequent PL relaxation mechanism was carried out by time-correlated single photon counting (TCSPC) method. Based on experimental results, it is assumed that a red shift of the main PL peak position is related to the HNO$_3$ activated formation of silicon oxygen compounds. Therefore, the use of electrolyte mixtures with composition ratios can be obtained adequate and reproducible results for PL tuning.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제1권1호
• /
• pp.95-103
• /
• 2001

The purpose of Introducing a combined cycle with gas turbine in power plants is to reduce losses of energy, by effectively using exhaust gases from the gas turbine to produce additional electricity or process. The efficiency of a combined power plant with the gas turbine increases, exceeding 50%, while the efficiency of traditional steam turbine plants is approximately 35% to 40%. Up to the present time, the PID controller has been used to operate this system. However, it is very difficult to achieve an optimal PID gain without any experience, since the gain of the PID controller has to be manually tuned by trial and error procedures. This paper focuses on the neural network tuning of the 2-DOF PID controller with a combined 2-DOF parameter (NN-Tuning 2-DOF PID controller), for optimal control of the Gun-san gas turbine generating plant in Seoul, Korea. In order to attain optimal control, transfer function and operating data from start-up, running, and stop procedures of the Gun-san gas turbine have been acquired and a designed controller has been applied to this system. The results of the NN-Tuning 2-DOF PID are compared with the PID controller and the conventional 2-DOF PID controller tuned by the Ziegler-Nichols method through experimentation. The experimental results of the NN-Tuning 2-DOF PID controller represent a more satisfactory response than those of the previously-mentioned two controllers.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1993년도 춘계학술대회논문집; 한국과학연구소, 21 May 1993
• /
• pp.140-146
• /
• 1993

Active noise control uses the intentional superposition of acoustic waves to create a destructive interference pattern such that a reduction of the unwanted sound occurs. In active noise control system the choice of a control structure and design of the controller are the main issues of concern. In real acoustic fields there are a vast number of noise sources with time-varying nature and the characteristics of transducers and the geometric set-up of control system are subject to change. Accordingly the control system should be designed to adapt such circumstances so that required level of performance is maintained. In this paper, the adaptive control algorithm for self-tuning adaptive controller is presented for the application in active noise control system. Self-tuning is a direct integration of identification and controller design algorithm in such a manner that the two processes proceed sequentially. The least mean square algorithm was used for the identification schemes and adaptive weighted minimum variance control algorithm was applied for self-tuning controller. Computer simulation results for self-tuning feedback controller are presented. And simulation results was shown to be useful for the situation in which the periodic noise sources act on the acoustic field.

• 전력전자학회논문지
• /
• 제10권1호
• /
• pp.29-37
• /
• 2005

본 논문에서는 PI형태의 속도제어기를 장착한 고성능 유도전동기의 조건부 적분형 자동 튜닝 anti-windup 기법을 제안한다. 제안된 방법에서는 전동기 운전 조건에 대한 사전 정보 없이도 전동기 토오크 지령의 주파수 해석에 의해서 적분기 온/오프 시점이 결정된다. 따라서, 사용자는 anti-windup 동작을 위한 별도의 제어 상수를 설정하지 않아도 된다. 또한, 동작 조건이 변동하여도 과도 상태의 속도는 항상 최소한의 오버슈우트와 점착시간을 가지도록 동작한다. 본 기법은 속도 및 토오크 응답의 오버슈우트를 허용하지 않는 유도전동기 고성능 응용 분야에 유용하게 적용 될 수 있으며, 기본 개념은 화학 공정이나 산업용 로봇과 같은 일반 산업 응용 분야에도 확대 적용 가능하다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2007년도 춘계학술발표대회
• /
• pp.625-628
• /
• 2007

갈수록 복잡화, 대량화되고 있는 시스템의 성능은 유지하면서 User Response Time 을 단축시키는 Tuning 은 투자 대비 이익률(ROI : Return On Investment)에 탁월한 효과를 가져온다는 점에서 중요시 되고 있다. 본 연구는 SAP R/3 System 환경에서 Tuning 통한 User Response Time 감소를 위하여 Query 분석 및 Table Index 생성, Program Logic 수정, Parallel Processing, SAP R/3 System 의 고유 기능인 Notes 적용을 통한 User Response Time 감소 기법을 제시한다.

• 전자공학회논문지SC
• /
• 제41권2호
• /
• pp.1-8
• /
• 2004

본 논문은 시간지연을 갖는 2차 시스템에서 시간영역의 설계사양을 만족하는 최적 강인 LQ-PID제어기 설계방법을 제안한다. 시간지연을 갖는 2차 시스템의 LQR 해를 이용한 LQ-PID제어기 파라미터는 설계사양을 만족하는 가격함수의 가중치요소 C와 R에 의해 결정되고, Q와 R의 선정은 시간영역에서의 오버슈트와 정착시간을 조절할 수 있는 설계파라미터들 선정에 의해 결정되어진다.