• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.13-16
• /
• 2007

반파장 공명기가 장착된 연소실의 비선형 음향 감쇠를 알아보기 위하여 비선형 음향해석을 수행하였다. 먼저 공명기가 없는 기본 연소실에 80 dB에서 150 dB의 넓은 범위의 음향파를 가진하여 음향장을 분석하였다. 제 1 접선방향 음향 모드의 감쇠율은 가진되는 음향파의 크기에 따라 비선형적으로 증가하였고, 125 dB 이상부터 비선형성이 나타나기 시작했다. 다음으로 반파장 공명기의 감쇠 효과를 조사하였다. 선형해석으로부터 유도된 최적의 음향학적인 동조 조건이 비선형 음향해석에서도 여전히 유효함을 알 수 있었다. 큰 음향파의 섭동에 대한 감쇠는 효과적이지만, 선형 음향 가진에 비해서 음향학적인 감쇠기로써의 기능은 작아짐을 알 수 있었다.

• Smart Structures and Systems
• /
• 제2권1호
• /
• pp.1-24
• /
• 2006

The optimal design of multiple tuned mass dampers (multiple TMD's) to suppress multi-mode structural response of beams and floor structures was investigated. A new method using a numerical optimizer, which can effectively handle a large number of design variables, was employed to search for both optimal placement and tuning of TMD's for these structures under wide-band loading. The first design problem considered was vibration control of a simple beam using 10 TMD's. The results confirmed that for structures with widelyspaced natural frequencies, multiple TMD's can be adequately designed by treating each structural vibration mode as an equivalent SDOF system. Next, the control of a beam structure with two closely-spaced natural frequencies was investigated. The results showed that the most effective multiple TMD's have their natural frequencies distributed over a range covering the two controlled structural frequencies and have low damping ratios. Moreover, a single TMD can also be made effective in controlling two modes with closely spaced frequencies by a newly identified control mechanism, but the effectiveness can be greatly impaired when the loading position changes. Finally, a realistic problem of a large floor structure with 5 closely spaced frequencies was presented. The acceleration responses at 5 positions on the floor excited by 3 wide-band forces were simultaneously suppressed using 10 TMD's. The obtained multiple TMD's were shown to be very effective and robust.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.369-372
• /
• 2004

The characteristics of antimony implants are relatively well-known. Antimony has lower diffusion coefficient, shorter implantation range, and smaller scattering as compared with conventional dopants such as phosphorous and arsenic. It has been commonly used in the doping of buried layer in Bi-CMOS process. In this paper, characteristics and appropriate condition of monitoring in antimony implant beam tuning using $Sb_2O_3$ were investigated to get a reliable process. TW(Thema Wave) and Rs(Sheet Resistance) test were carried out to set up condition of monitoring for stable operation through the periodic inspection of instruction condition. The monitoring was progressed at the point that the slant of Rs varied significantly to investigate the variation of instruction accurately.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.98-100
• /
• 2007

This paper proposes a robust digital controller for PWM voltage source inverter using CRA method. The usual inverter controller for the operation of constant voltage and constant frequency consists of a double looped PI controller for the outer voltage controller and the inner current controller, of which the order of characteristic polynomial is high and so the gain tuning is difficult. Considering the limited switching frequency of the devices and sampling frequency of the digital controller, the gain tuning is usually based on the engineering experiences with the try and error method. In this paper, the error-space approach is used to get the system model including the controller with low order, and the characteristic ratio assignment (CRA) method is proposed for the design of robust controller which has the advantage to design the optimal gain to meet the referenced response and overshoot within the limit range. The PSiM simulation and experience results are shown to verify the validity of the proposed controller.

• 조명전기설비학회논문지
• /
• 제29권10호
• /
• pp.17-24
• /
• 2015

In this paper, we investigated the output polarization of a Lyot-type optical fiber comb filter based on a polarization-diversity loop structure. It was found that the output state of polarization (SOP) of the filter made a wavelength-dependent evolution, and the spectral periods of the output SOP variation in flat-top and lossy flat-top band modes were the channel separation of the filter and its half, respectively. For a certain input SOP, the filter could pass or reject specific spectral sections by adding and controlling an output analyzer. In particular, it was theoretically anticipated that the filter with the output polarizer could provide the fine continuous tuning of its pass band center in a wavelength range corresponding to the ${\pm}9.5%$ of channel spacing(0.8nm) when the input SOP was properly adjusted. It is expected that this tuning function can be effectively applied to suppress unwanted spectral portions in modulated optical signals.

• Current Optics and Photonics
• /
• 제6권3호
• /
• pp.282-287
• /
• 2022

Narrowing the spectral linewidth and improving the wavelength stability of high-power laser diodes (HPLDs) are both in high demand for rapidly maturing industrial laser applications. In this study, we investigate the spectral behavior of a commercial HPLD bar module composed of 19 laser diodes (LDs) in a single-layered bar with a built-in volume Bragg grating (VBG) and an additional cascaded VBG. Optical loss due to the extra cascaded VBG is kept below 5% when the optical output is 5 W or more. The full width at half maximum of the Fabry-Perot peak from the cascaded VBG is reduced to about 12.4% and 29.1% at the edge (1^st LD) and center (10^th LD) of the HPLD bar module respectively, compared to using only a built-in VBG at an optical power of 10 W or more. In addition, fine wavelength tuning is achieved by temperature control of the extra VBG, and the obtained wavelength-tuning range amounts to about 10.6 pm/K.

• 대한전자공학회논문지SD
• /
• 제48권11호
• /
• pp.48-56
• /
• 2011

전기적인 조정(tuning) 시스템에 사용하기 위해, 차동출력을 갖는 새로운 A급 $CCII{\pm}$와 이를 이용한 출력 전류 제어가능한 CCII+를 설계하였다. 설계한 $CCII{\pm}$는 종래의 CCII+와 상보적인 교차 전류원으로 구성된다. 또한, 출력 전류 제어가능한 CCII+는 제안한 $CCII{\pm}$와 단일 출력을 갖는 전류 이득 증폭기로 구성된다. 시뮬레이션 결과 $CCII{\pm}$는 $1.9{\Omega}$의 전류 입력단자의 임피던스와 우수한 전압 및 전류 폴로워 특성을 갖고 있다는 것을 확인하였다. 제안한 CCII+는 $100{\mu}A$에서 10mA의 바이어스 제어 전류 범위에서 10MHz의 3-dB 주파수을 갖고 있으며, 출력 전류 제어 범위는 4-디케이드(decade)이다. CCII+의 전력소비는 ${\pm}2.5V$ 공급전압에서 4.5mW이다.

• 한국전자파학회논문지
• /
• 제21권1호
• /
• pp.69-75
• /
• 2010

본 논문에서는 클랩형 전압 제어 발진기 회로를 바탕으로 UHF 대역에서 광대역 주파수 합성기를 설계하는 방법을 제시하였다. 전압 제어 발진기의 동작 조건 중 부성 저항 회로와 부하 회로의 위상 변화 특성을 해석하여 동작 범위를 증가시킬 수 있는 방법을 제안하였다. 이러한 방법을 적용하여 광대역 전압 제어 발진기를 설계하고, PLL 기반의 광대역 주파수 합성기를 설계하고 제작하였다. 제작된 주파수 합성기는 0~5 V의 버랙터 제어 전압에서 740~1,530 MHz의 발진 주파수 범위를 갖고, 2~-6 dBm의 출력 전력을 얻었다. 또한 위상 잡음은 10 kHz에서 -77 dBc/Hz, 100 kHz에서 -108 dBc/Hz로 측정되었다.

• 한국전자파학회논문지
• /
• 제21권5호
• /
• pp.468-474
• /
• 2010

본 논문에서는 K-band(18.6 GHz) 대역에서 동작하는 VCHO(Voltage Controlled Harmonic Oscillator)를 설계 및 제작하였다. 제안된 구조의 발진기는 두 개의 hair-pin 공진기들이 각각 능동소자의 입력단과 출력단에 위치한다. 또한 두 개의 공진기를 동시에 동조하는 구조를 통하여 기본 주파수 억압 특성과 2차 고조파($2f_0$)의 출력을 개선하였다. VCHO의 제작 및 측정 결과에 의하면 출력 전력은 -2.41 dBm, 기본 주파수 억압 특성은 -21.84 dBc 그리고 위상 잡음은 -101.44 dBc/Hz @ 100 kHz의 특성을 얻을 수 있었다. 또한 바렉터 다이오드의 전압 변화에 따른 주파수 동조 범위는 약 10.58 MHz를 얻었으며, 이 때 ${\pm}0.19\;dB$의 전력 평탄도를 얻을 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• 제2권3호
• /
• pp.391-395
• /
• 2007

MgO enhanced $(Ba_{0.6}Sr_{0.4})$ $TiO_3$ thick films have been fabricated by a tape casting and firing method for tunable devices on the microwave frequency band. In order to improve ferroelectric properties, the composite thick films enhanced with MgO on BST have been asymmetrically annealed by a focused halogen beam method. Dielectric constants of composite thick films are changed from 1050 to 1300 at 100 kHz after 60 s and 150 s annealing by the focused halogen beam. Even though no prominent changes were previously observed from the thick films before and after annealing in terms of chemical composition and surface morphology, it is clear that the average particle size of the thick films calculated by Scherrer's formula were increased by annealing. Furthermore, a strong correlation between particle size and dielectric constant of the composite thick films has been observed; dielectric constant increases with increased particle size. This has been attributed to the increased volume of ferroelectric domain due to increased particle sizes. As a result, the tuning range was improved by halogen beam annealing.