• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.7-8
• /
• 2006

As a new type of flame, tubular flame has attracted much attention from a fundamental viewpoint and many experimental and theoretical studies have been made on its characteristics. Recently, it is also recognized that the tubular flame has great potentials as practical combustor because its stability range is very wide in fuel concentration and also in injection velocity. Thus, tubular flame burners have been developed for various kinds of fuels. They are gaseous fuels of methane, propane, hydrogen, and by-product fuels gases in steel making processes including BFG (Blast Furnace Gas), LDG (LD Converter Gas), and COG (Cokes-Oven Gas), liquid fuels of kerosene, A-type and C-type heavy oils, and a solid fuel of biomass powder. In this paper, recent developments of the tubular flame burners have been briefly introduced.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.175-178
• /
• 2014

The flame cell dynamics in 2-D opposed nonpremixed tubular configuration was investigated using high-fidelity numerical simulations. The diffusive-thermal instability occurs as the $Damk{\ddot{o}}hler$ number, Da, approaches the 1-D extinction limit of the tubular flames and several flame cells are generated depending on Da, and flame radius. In general, the number of flame cells are found close to the largest wave number from the linear stability analysis. It was also found from the displacement speed analysis that during the local flame extinction and cell formation, negative edge flame speed is observed due to small gain from reaction compared to large loss from diffusion.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.466-471
• /
• 2004

In gas turbines, excess air for combustion is available and therefore lean premixed combustion is the most promising approach to the significant reduction of thermal NOx emissions. At lean conditions, however, flame stability is inherently worse and hence combustion tends to be incomplete. Efforts have been devoted toward extending the operating range of complete combustion at leaner conditions. One of them is the lean-lean two-stage combustion where lean to ultra-lean secondary mixtures are mixed with the hot burned gas from the primary stage. Conventional flame combustion or flameless reaction are initiated depending on the conditions of the secondary zone. In the first part of the present study, the effects of fuel injection on the emissions and flame stability were investigated for a single tubular flame, In the second part, the emissions and flame stability were studied for a two-stage combustor with secondary mixture injected through the tangential slots on a cylindrical combustor wall. The effects of the ratio of air flow rates to the primary and secondary zones on the emissions and combustion characteristics were investigate.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.247-250
• /
• 2015

The characteristics of opposed nonpremixed tubular flames with radiation heat loss are investigated using linear stability analysis and 2-D numerical simulations. Two extinction limits, as the $Damk{\ddot{o}}hler$ number is small or large, are confirmed using finite difference method with a simple continuation method. It is verified that the results of linear stability analysis predict the number of flame cells and the critical Da starting cellular instability or amplification of temperature near both extinction limits with good resolution.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.142-149
• /
• 2000

The results of stand and field testing of a combustion chamber for a heavy-duty 150 MW gas turbine are discussed. The model represented one of 14 identical segments of a tubular multican combustor constructed in the scale 1:1. The model experiments were executed at a pressure smaller than in the real gas turbine. The combustion efficiency, pressure loss factor, pattern factor, liner wall temperature, flame radiation, fluctuating pressure, and NOx emission were measured at partial and full load for both model and on-site testing. The comparison of these items of information, received on similar modes in the stand and field tests, has allowed the development of a method of calculation and the improvement of gas turbine combustors.

• Journal of Mechanical Science and Technology
• /
• 제15권9호
• /
• pp.1319-1327
• /
• 2001

The results of stand and field testing of a combustion chamber for a heavy-duty 150 MW gas turbine are discussed. The model represented one of 14 identical segments of a tubular multican combustor constructed 1:1 scale. The model experiments were executed at a lower pressure than that in a real gas turbine. Combustion efficiency, pressure loss factor, pattern factor, liner wall temperature, flame radiation, fluctuating pressure and NOx emission were measured at partial and full loads for both model and on-site testing. The comparison of these items in the stand and field test results led to has the development of a method of calculation and the improvement of gas turbine combustors.

• 대한기계학회논문집B
• /
• 제20권8호
• /
• pp.2626-2636
• /
• 1996

A study of soot deposition and reentrainment was carried out both theoretically and experimentally to understand behavior of soot formed by incomplete combustion in a diesel engine. Theoretically, soot deposition on engine cylinder wall and/or piston head was studied with a stagnation point flow approximation. Soot reentrainment occurred upon exhaust gas blowdown was also studied by assuming a long-normal shear velocity distribution. Experimentally, a LPG$O_2/N_2$ flame impinging on a disk, produced by a concentric tubular burner, was chosen as deposition configuration and a shear flow unit with compressed air was installed for the study of reentrainment. For selected flame configuration, soot deposition measurements were conducted and showed that the dominant deposition mechanism was thermophoresis. Distributions of gas temperature and soot number density were estimated by combining data obtained by a B-type thermocouple with a thermophoretic transport theory. Disk temperature distributions were directly measured using a K-type thermocouple. Soot size and morphology were estimated from a TEM photograph. Ratios of soot deposit to reentrained amount were measured for a wide range of shear flow velocities, which showed that the reentrainment model was reasonable.

• Food Science and Biotechnology
• /
• 제14권4호
• /
• pp.456-460
• /
• 2005

To enforce the maximum residue limit for residual hexane (0.005 g/kg) in commercially available Korean vegetable oil, convenient and accurate quantification methods were investigated. Using dual surrogate standards, pentane and heptane were dissolved in ethanol, and then added to hexane-tree sunflower oil for setting up the calibration curve. Gas Chromatograph-Flame Ionization Detector with a porous layer open tubular column, indicated good chromatographic separation of hexane from other inhibiting matrix components. The lowest calibration level was $0.5\;{\mu}g/g$, not exceeding a relative standard deviation of 10% (RSD%), and 1.0\;{\mu}g/g$ not exceeding a deviation of 22% RSD% using heptane as an internal standard for the Static headspace analysis by using a headspace auto-sampler and manual injection, respectively. The residual hexane was detected in nine of the samples among 87 vegetable oil samples purchased on the local market.

• The Korean Journal of Physiology
• /
• 제16권1호
• /
• pp.69-76
• /
• 1982

The effect of parathyroid hormone on calcium and phosphate metabolism have been widely investigated, however less attention has been paid to the effect on urinary excretion. This study was performed for the purpose determining urinary excretion of Na, K, Ca, and $Po_4$, of 18 thyroparathyroidectomized (TPTX) rabbits, which were TPTX previously 7 to 10 days compared with the same normal ones. After TPTX 0.2 mg/day of synthyroid was donated to the rabbits. The concentration of electrolytes in the serum and urine was determined by the following method; Na and K were determined by means of flame photometry, Ca was by EDTA titration $method^{19)}$, and $Po_4$ by Fiske and Subba-Raw $method^{20)}$. The results as follows. The concentrations of electrolytes in the serum were 1) In the normal control rabbits (N = 25) (data, $Mean{\pm}S.E.$) $Na\;131.72{\pm}1.33\;mEq/L$, $K\;3.59{\pm}0.28\;mEq/L$, $Ca\;12.58{\pm}0.29\;mg%$, $Po_4\;4.50{\pm}\;0.45mg%$. 2) In the TPTX rabbits(N= 18) $Na\;140.6l{\pm}2.56\;mEq/L$, $K\;3.38{\pm}0.36\;mEq/L$, $Ca\;l2.18{\pm}0.45\;mg%$, $Po_4\;3.92{\pm}\;0.35\;mg%$. There was no significant change between the normal and TPTX rabbits. The concentration of elelctrolytes in the urine were variously changed. 3) In the normal rabbits. $Na\;8.40{\pm}1.09\;mEq/L$, $K\;81.59{\pm}10.19\;mEq/L$, $Ca\;16.02{\pm}3.12\;mg%$, $Po_4\;13.16{\pm}2.89mg%$. 4) In the TPTX rabbits, $Na\;14.57{\pm}3.39\;mEq/L$ slight ncreased, $K\;116.06{\pm}12.77\;mEq/L$ significant increased (P<0.05), $Ca\;18.90{\pm}5.44\;mg%$ no significant increased, $Po_4\;43.38{\pm}8.67\;mg%$ significant increased (p<0.01). The effect of TPTX was assumed that it affected upon increasing tubular secretion of $K^+$ and inhibition of the tubular reabsorption of $Po_4$.

• 대한화학회지
• /
• 제63권4호
• /
• pp.246-252
• /
• 2019

GC-OTC/FID(Gas chromatography-Open Tubular Column/Flame Ionization Detector) 계에서 극성 용매(Alcohols)를 분리 하기 위하여 DMSO(Dimethyl sulfoxide)를 사용하였다. 이 계에서는 극성 용매들 보다 DMSO가 늦게 용출이 된다. 이런 계에서 크로마토그래픽 인자인 조정된 머무름 시간($t_R^{\prime}=t_R-t_O$)과 용량 인자{$k^{\prime}=(t_R-t_O)/t_O$} 및 분리 인자{${\alpha}=(t_{R2}-t_O)/(t_{R1}-t_O)$}를 구하기 위하여 불감시간($t_O$)이 필요하다. 그러나 이런 계에서 $t_O$ 를 구하기 위한 보고가 현재까지 된 바가 없기 때문에, 본 연구에서는 $t_O$ 를 구하는 방법을 개발하고자 하였다. $t_O$ 를 계산하기 위하여 DMSO의 머무름 시간($DMSO\;t_R$)을 상용로그로 전환하였다($f(x)={\log}\;t_{R(DMSO)}{\rightarrow}t_O$, $t_O={\log}$ 9.551=0.980). 개발된 방법의 적합 여부를 확인하기 위하여 $CH_4$의 $t_R$과 ${\ln}\;t_{R(DMSO)}$를 ${\log}\;t_{R(DMSO)}$와 비교하였다. 세 가지 방법 중 $CH_4\;t_R$과 ${\ln}\;t_{R(DMSO)}$는 k' 과 ${\alpha}$를 계산하는데 적합하지 않았다. 본 연구에서 개발한 방법인 ${\log}\;t_{R(DMSO)}$는 일반적인 기준인 k'(1${\alpha}(1<{\alpha}<2)$를 만족하였다. 본 연구에서 개발한 계산방법은 쉽고 편리하기 때문에, 이와 유사한 계에서도 활용될 것으로 기대된다.