• 한국수소및신에너지학회논문집
• /
• 제18권4호
• /
• pp.452-457
• /
• 2007

Titanium foil and mesh(anodized tubular $TiO_2$ electrode, ATTE) were anodized in a bath at $5^{\circ}C$ with 20V external bias applied, then annealed at different temperatures($450^{\circ}C{\sim}850^{\circ}C$) to obtain tubular $TiO_2$ on the Ti substrate. The prepared sample was used to investigate rate of hydrogen production as well as Cr(VI) reduction. The ATTEs annealed at relatively lower temperatures showed higher activity than those at relatively higher temperatures. In particular, the Cr(VI) reduction was pH-dependent. To improve photocatalytic Cr(VI) reduction with the ATTEs, two configurations, fixing foil type and rotating mesh type, were also compared. As a result, the rotating mesh type was much more effective for Cr(VI) reaction than the former due to the more efficient use of the light. In the rotating type reactor, as the rotating speed increased, the rate of the Cr(VI) reduction was getting faster.

• 한국재료학회지
• /
• 제17권6호
• /
• pp.313-317
• /
• 2007

In-situ micro-channeled multi tubular solid oxide fuel cell(SOFC) was fabricated using multi-pass extrusion process with out side diameter of 2.7 mm and active length of 5 mm that contained 61 individual cells. Cell materials used in this work were NiO-YSZ (50 : 50 vol.%), 8 mol% yttria-stabilized zirconia(8YSZ), $La_{0.8}Sr_{0.2}MnO_3(LSM)$ as anode, electrolyte, and cathode, respectively. The arrangement of each electrode and electrolyte layer in green bodies showed uniformity and integrity after extrusion and sintering. The XRD analysis confirmed that no reaction phases appeared and the microstructure of the electrolyte was fairly dense (relative density > 96%) after sintering.

• 한국수소및신에너지학회논문집
• /
• 제24권6호
• /
• pp.480-486
• /
• 2013

In this study, tubular SOFC unit cell with advanced anode current collector was fabricated to improve the cell performance. First, we prepared two types of single cells having the same manufacture processes such as the same electrolyte, electrode coating condition and sintering processes. And then to compare the developed single cell performance with conventional cells, we changed the anode current collecting methods. From the impedance analysis and I-V curve analysis, the cell performance of advanced cell is much higher than that of conventional cell.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.886-889
• /
• 2000

This paper describes the machining characteristics of the MoSi$_2$-based composites by electric discharge drilling with various tubular electrodes. MoSi$_2$-based composites has been developed in new materials for jet engine of supersonic-speed airplanes and gas turbine for high- temperature generator. By combining a nonconducting ceramics with more conducting ceramic it was possible to raise the electrical conductivity. In drilling by EDM, the dielectric flushed down the interior of the rotating tube electrode, in order to facilitate the removal of machining debris from the hole. Various metal-coated tubular electrodes of which core are copper and brass are used to know the effect of coating material on machinability of ED drilling.

• 대한화학회지
• /
• 제36권5호
• /
• pp.638-643
• /
• 1992

황화이온검출기로서 2가지 형태의 연속 flow-through 전극계의 분석적 감응성질을 조사하고, 최적조건에서 그들의 감응특성을 직접 비교하였다. 두 검출계에 있어서 측정한 봉우리전위를 황화이온농도의 대수값과 관련지웠으며, 적어도 시간당 20개의 시료를 정량할 수 있었다. pH전극법에서는 투석기를 지나 흘러가는 recipient stream의 pH를 측정하였다. 장치는 연속흐름형의 기체투석기가 관형 polymer 막전극과 연결되도록 설계되어 있다. 이 방법의 최적실험조건은 recipient $5.0 {\times} 10^{-5} M NaOH ＋ 5.0 {\times} 10^{-3} M$ NaCl과 diluent 0.10M $H_2SO_4$이며, recipient stream, diluent stream 및 시료의 유속은 모두 1.0ml/min이다. 황화이온 전극법에서는 시판하는 황화이온선택성 전극을 flow-through cell 속의 황화이온을 검출하는 데에 썼다. 이 방법의 최적실험조건인 황화이온 산화방지 완충제(1.0M NaOH 용액에 3.5g 아스코르브산과 7.6g $Na_2EDTA$를 용해)와 시료의 유속은 각각 1.4 ml/min와 1.0 ml/min이다.

• 대한기계학회논문집A
• /
• 제34권7호
• /
• pp.829-835
• /
• 2010

본 연구에서는 미세유체소자의 전원소자로 적용하기 위한 일회용 수소발생소자와 튜브형 고분자전해질 연료전지로 구성된 일회용 전원소자에 관한 것이다. 튜브형 고분자전해질 연료전지는 1.52 mm의 직경을 가지며, 수소발생소자는 알루미늄과 5M 수산화나트륨의 반응을 통해 수소를 발생시켜 튜브형 고분자전해질 연료전지로 공급하게 된다. 단위 튜브형 고분자전해질 연료전지는 순수한 수소에 대해여 0.81V 의 개방전압과 0.35V에서 $16.4\;mW/cm^2$의 최대전력밀도를 나타내었으며, 수소발생기는 15 분 동안 $11.6\;m{\ell}$의 수소를 생성하였다. 튜브형 고분자전해질 연료전지와 수소발생기가 결합된 일회용 전원소자는 아무런 주변장치 없이 10 분 동안 1.06 mW (0.46V)의 일정한 전력을 발생하였으며, 3 개가 직렬로 연결된 고분자전해질 연료전지는 10 분 동안 LED(2.5 mW@1.8V)를 동작시켰다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.749-752
• /
• 2009

Anodized tubular titania ($TiO_2$) electrodes (ATTEs) are prepared and used as both the photoanode and the cathode substrate in a photoelectrochemical system designed to split water into hydrogen with the assistance of an enzyme and an external bias (solar cell). In particular, the ATTE used as the cathode substrate for the immobilization of the enzyme is prepared by two methods; adsorption and crosslinking. Results show that the optimized amount of enzyme is 10.98 units for the slurried enzyme, 3.66 units for the adsorbed one and 7.32 units for the crosslinked one, and the corresponding hydrogen evolution rates are 33.04, 148.58, and 234.88 umol/hr, respectively. The immobilized enzyme, specifically the chemically crosslinked one, seems to be much superior to the slurried enzyme, due to the enhanced charge-transfer process that is caused by the lower electrical resistance between the enzyme and the ATTE. This results in a greater number of accepted electrons and a larger amount of enzymes able to deal with the electrons.

• 전기화학회지
• /
• 제12권4호
• /
• pp.329-334
• /
• 2009

본 연구는 연료전지 운전시 전극 촉매 및 전해질막 내에서 발생하는 연료 및 산화제의 산화/환원 반응 메커니즘, 이동현상, 구성품 열화현상 등을 핵자기 공명 (NMR, Nuclear Magnetic Resonance)을 이용하여 연료전지의 분해나 시료 채취 없이 제자리 (in situ) 분석할 수 있는 진단장치용 연료전지 개발에 관한 것이다. NMR에 사용되는 연료전지는 특수하게 제작된 TCD (Toroid Cavity Detector) 탐침 내부에서 작동하여야 하며, TCD 탐침이 가지는 기하학적 제한 요소들로 인해 일반적인 평판형 연료전지와 달리 원통형으로 제작된다. 이로 인해 반응물의 공급이나 생성물의 제거가 어려우며 누수 현상 및 불균일한 압력 분배가 발생하여 성능이 낮다. 따라서, in situ NMR 분석용 연료전지가 가지는 구조상의 특징인 원통형에 적합한 유로를 설계하고 제작하여 물질 전달 특성을 개선해야 할 필요성이 있다. 본 연구에서는 NMR 장비 내의 자기장에 영향을 미치지 않는 비자성 물질을 이용해 원 통형 공기극 유로를 개발하여, 산소의 공급 및 반응물의 제거를 원활하게 하였다. 또한, 체결 압력을막-전극 접합체에 균일하게 분배하여 누수 및 누액을 차단하였다. 이를 통해, 상온에서 약 $36mW/cm^2$의 우수한 성능을 나타내는 in situ NMR 진단용 직접 메탄올연료전지 시스템을 개발하였다.

• Bulletin of the Korean Chemical Society
• /
• 제33권5호
• /
• pp.1613-1616
• /
• 2012

Ni nanoparticles-$TiO_2$ nanotube arrays (Ni/$TiO_2NTs$) composites were prepared by pulsed electrodeposition method and subsequently characterized by means of field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDX). The FESEM results showed that highly dispersed Ni nanoparticles were not only loaded on the top of the $TiO_2NTs$ but also within the tubular structure, and the particle size of Ni prepared at different current amplitude (100, 200 and 300 $mA{\cdot}cm^{-2}$) was in the range of 15 to 70 nm. The electrochemical studies indicated that Ni nanoparticles loaded on the highly ordered $TiO_2NTs$ are readily accessible for electrochemical reactions, which improve the efficiency of the Ni nanoparticles and $TiO_2NTs$. A maximum specific capacitance (27.3 $mF.cm^{-2}$) was obtained on the Ni/$TiO_2NTs$ composite electrode that prepared at a current of 200 $mA.cm^{-2}$, and the electrode also exhibited excellent electrochemical stability.

• 한국수소및신에너지학회논문집
• /
• 제22권4호
• /
• pp.527-533
• /
• 2011

CNFs had been well addressed due to numerous promising applications in science and technology. Besides the same physicochemical properties of ordinary carbon materials such as active carbons and carbon black, they exhibit specific, e.g., tubular or fibrous structures, a large surface area, high electrical conductivity stability, as well as extremely high mechanical strengh and modulus, which make them a superior material for electrochemical capacitors. In this study, CNFs were pretreated by mechanical milling with different time in mortar and pestle. The milled CNFs were used as active material of electrode whose electrochemical property was tested to find physicochemical characterization variation. CNF electrode milled for 5 min has the highest electric capacitance. XPS spectrum were employed to explore changes in functional group induced from mechanical milling. Crystal size was calculated to analyze change of peak from different milling time by XRD. The CNF milled for 5 min has the largest crystal size and the highest electric capacitance.