• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.5
• /
• pp.490-499
• /
• 2002

Recently, gamma radiographic equipments have been used about 1,000 sets manually and operated by about 2,500 persons in Korea. In order for a radiography to work effectively with avoiding any hazard of the high level radiation from the source, many field workers have expected developing a wireless automatic remote exposure controller. The KlTCO research team has developed an automatic remote exposure controller that can regulate the speed of $0.4{\sim}1.2m/s$ by BLDC motor of 24V 200W which has output of $54kgf{\cdot}cm$, suitable torque and safety factor for the work. And the developed automatic remote exposure controller can control rpm of motor, pigtail position by photo-sensor and exposure time by timer to RF sensor. Thus, the developed equipment is expected that the unit can be used in many practical applications with benefits in economical advantage to combine the use of both automatic and manual type because attachment is possible existent manual remote exposure controller, AC and DC combined use.

• Journal of the Korean Geographical Society
• /
• v.43 no.4
• /
• pp.466-476
• /
• 2008

Gurin Cave, 442 m long, is a lava tube developed on the northern slope of Mount Halla. Seventy-three meters of its lower reach became a river channel since Byeongmun River flowed into a window after roof collapse took place. The subterranean channel has a width of 447 cm and a height of 501 cm, respectively. Its banks show well-developed lava shelves of a typical lava tube, while its floor has sculpted forms which characterize a bed of a bedrock stream. The reach is likely to be collapsed and then has four collapsed windows since its roof has the densely developed testudinal joints and consists of thin lavas with a thickness of 30 to 60 cm. Before the subterranean channel appeared, a ground channel flowed over the cave and joined into a main channel of Byeongmun River at 653 m in altitude. However, the subterranean channel substituted the ground channel since a bed of the ground channel collapsed into the cave. The new channel, flowing through the cave, joined into a main channel at 660 m in altitude. As the drainage area of Byeongmun River expanded upstream the cave, the new channel changed into a main channel. Since floodwater flows down the ground channel as well as the subterranean channel, a distributary stream has temporarily appeared at the collapsed window. Lava tubes are likely to have an affect on the development of river system in Jeiu Island, in that the caves have constantly shown roof-fall.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.93-93
• /
• 2009

In order to overcome the lack of reactivity with hydrogen gas ($H_2$) and utilize unique properties of Carbon Nano Tubes (CNTs) for the application to hydrogen sensors, there have been intensive works on the surface functionalization of CNTs with various types of nanoparticles including Pd. In the present work, we have investigated the effect of dendrimers and Pd nanoparticles to the hydrogen sensing properties of CNTs by comparing three types of samples: Pd/SWNTs (Sample I), Pd/dendrimer/SWNTs (Sample II) and heat-treated Pd/dendrimers/SWNTs (Sample III). As a result of IV measurement under the $H_2$ and air, sample I was found to have a high sensitivity (25%) to $H_2$, but to have a very slow response time (324 s) and recovery rate. On the other hand, Sample II was found to show much faster response time (3 s) and good recovery rate but lower sensitivity (8.6%) than Sample I which is due to induced dipole moments in the dendrimers. Interestingly, Sample III showed both fast response time (7 s) and high sensitivity (25%), indicating that the pyrolysis of the dendrimers during heat treatment which reduce the distance between the surface of the SWNTs and the functionalized Pd nanoparticles plays a key role in improving the sensitivity. The pyrolysis of the dendrimers in Pd nanoparticle-dendrimer-SWNTs was found to enable a significant electrical conductance modulation upon exposure to extremely low concentrations (10 ppm) of $H_2$ in air. Our results demonstrate that the Pd Nanoparticle-Grafted Single-Walled Carbon Nanotubes(SWNTs) with Dendrimers can be used to detect hydrogen, makingoutstanding properties such as fast response, and recovery time, high sensitivity, low detection limit at room temperature compared with other types of hydrogen sensors.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.12
• /
• pp.1762-1772
• /
• 2013

The objective of the current study was to determine the effect of pre-slaughter stress, season and breed on the activity of plasma creatine kinase (CK) and the quality of mutton. One hundred and seventy-three (173) castrated sheep from Dormer (DM), South African Mutton Merino (SAMM), Dorper (DP) and Blackhead Persian (BP) sheep breeds were used in the study. The animals were grouped according to age-groups as follows: Group 1 (6 to 8 months), Group 2 (9 to 12 months) and Group 3 (13 to 16 months). Blood samples were collected during exsanguinations using disposable vacutainer tubes for CK analysis. Representative samples of the Muscularis longissimuss thoracis et. lumborum (LTL) were collected from 84 castrated sheep, of different breeds (28 per breed) 24 h after slaughter. The following physico-chemical characteristics of mutton were determined; meat pH ($pH_{24}$), color ($L^*$, $a^*$ and $b^*$), thawing and cooking losses and Warner Braztler Shear Force (WBSF). The activity of plasma CK was significantly higher (p<0.001) in summer ($1,026.3{\pm}105.06$) and lower in winter ($723.3{\pm}77.75$). There were higher values for $L^*$ ($33.7{\pm}0.94$), $b^*$ ($11.5{\pm}0.48$) and WBSF ($29.5{\pm}1.46$) in summer season than in winter season; $L^*$ ($29.4{\pm}0.64$), $b^*$ ($10.2{\pm}0.33$) and WBSF ($21.2{\pm}0.99$). The activity of plasma CK was influenced by the type of breed with Dormer having the highest (p>0.001) levels ($1,358.6{\pm}191.08$) of CK. South African Mutton Merino had higher values for $pH_{24}$ ($5.9{\pm}0.06$), $L^*$ ($34.2{\pm}0.97$), $b^*$ ($12.2{\pm}0.50$) and WBSF ($26.8{\pm}1.51$) and Blackhead Persian had higher values ($35.5{\pm}2.17$) for cooking loss (CL%) than the other breeds. Computed Principal Component Analyses (PCA) on the activity of plasma CK and physico-chemical characteristics of mutton revealed no correlations between these variables. However, positive correlations were observed between $pH_{24}$, $L^*$, $a^*$, $b^*$, CL% and WBSF. Relationships between pre-slaughter stress, CK activity and physico-chemical characteristics of mutton were also observed. It was therefore concluded that although mutton quality and creatine kinase were not related, pre-slaughter stress, season and breed affected the activity of creatine kinase and mutton quality.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.2
• /
• pp.237-242
• /
• 2001

Colostrum deprived, newborn pigs (N=12, $1.64{\pm}0.05kg$) were used to study the renal threshold of carnitine, and effects of emulsified medium-chain triglyceride (MCT, tri-8:0) feeding on kinetics of plasma carnitine and urinary carnitine excretion. An arterial catheter was inserted through an umbilical artery, and a bladder catheter was inserted via the urachus. Piglets were oro-gastrically gavaged with one of six carnitine levels (0, 60, 120, 180, 240, $480{\mu}mol/kg\;W^{0.75}$) with (+MCT) or without medium-chain triglycerides (-MCT) in 0.9% NaCl solution. Blood was sampled into heparinized tubes at 0, 1, 2, 4, 6, 8, 14, and 20 h after gavage, and urine was collected and pooled into 1 h or 2 h composite samples to determine free- and short-chain carnitine concentrations. Plasma from the 12 newborn piglets before gavage contained $10.6{\pm}1.2{\mu}mol/L$ free carnitine and $7.2{\pm}0.6{\mu}mol/L$ acid-soluble acyl carnitine. The renal threshold for carnitine was similar between the MCT and the +MCT group (42.6 13.1 and $46.4{\pm}2.0{\mu}mol/L$, respectively), but the correlation between plasma free carnitine and urinary excretion was altered. Plasma free carnitine linearly increased with increasing carnitine dosage (-MCT group, $R^2=0.95$, p<0.001; +MCT group, $R^2=0.91$, p<0.001), but was decreased by 50% when medium-chain triglycerides were fed. The peak in plasma free carnitine concentration was depressed by medium-chain triglycerides feeding also. Therefore, the plasma and urinary short-chain/free carnitine ratio of the +MCT group was increased by 100% and 40%, respectively (p<0.01). Feeding of medium-chain triglycerides may delay plasma carnitine elevation via altering the kinetics of absorption. Similarly, the plasma and urinary short-chain/free carnitine ratio were affected by interaction between medium-chain triglycerides and time (p<0.01). The present study suggests that an oral carnitine dose over $480{\mu}mol/kg\;W^{0.75}$ may be needed to reach the free carnitine renal threshold within a short period, especially when provided together with medium-chain triglyceride.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.5
• /
• pp.547-556
• /
• 2007

The release, sampling and analytical methods have been developed and tested for perfluorocarbons (PFCs) atmospheric tracers in order to gain insight into the atmospheric transport and dispersion over the urban conditions of Seoul, Korea. Although PFCs tracer experiments provide unique opportunities to test local and urban scale of transport and dispersion, no previous experiment with PFCs has been conducted in Korea. PMCH and PDCH were chosen as targeted tracers in our study due to their extreme low ambient concentrations and great sensitivities among various PFCs. For PFCs release system, a set of micro-metering pump, electronic balance, vaporizing furnace and high speed blower was constructed for precise and accurate release of tracers. The precision of released rate by this system was estimated to be 1%. Samplings of PFCs were carried out by fabricated portable air samplers with micro pumps and rotameters into glass tubes packed with 150 mg of Carboxen-569. The uncertainty of these sampling system was maintained below 14%. PMCH and PDCH were quantified in GC/ECD with preconditioned injection system to eliminate the interference compounds using traps and subsequent catalytic conversion system prior to column separation. Three intensive field test were undertaken during the springtime of 2002 to 2004 in eastern part of Seoul. Daily background samples were collected to characterize the background levels of PMCH and PDCH prior to their release. The observed background concentrations of PMCH ranged from 3.5 to 10.1 fL/L and varied randomly in location and time in this study. Its mean and standard variation of background concentration ($6.8{\pm}1.9\;fL/L$) are higher than those ($3.2{\sim}5.8\;fL/L$) of other historic tracer studies. Identified uncertainty for background PMCH was $1.7{\sim}2.0\;fL/L$ using this analytical system. Combined relative uncertainty in determining the tracer's concentrations was estimated as 17%. However, its background concentrations and uncertainty in concentration determination were found to be low and stable enough for tracer study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.23-30
• /
• 2016

In this study, the heat transfer and pressure drop characteristics were evaluated for multi-tube $CO_2$ water heaters with lengths of 4.5 m and 7.5 m. The evaluation was done using the -NTU method, and the results were compared with experimental data. Water flows through the shell side of the water heater, while $CO_2$ flows through 8 inner tubes. The heater uses a counter-current design to maximize the heat transfer efficiency. The energy balance equation describing the flows of $CO_2$ and water for each node is set up using the section-by-section method. The calculated heat transfer rates agree well with the experimental data within ${\pm}5%$ error. The outlet water temperature decreased linearly with the increase of the water flow rate. The calculated heat transfer rates agreed well with the experimental data within ${\pm}3%$ error. The results show that the heat transfer rate increases almost linearly with the increase of water flow rate or $CO_2$ inlet temperature in both the 4.5-m and 7.5-m water heaters, whereas the water outlet temperature linearly decreases with the increase of the water flow rate. The comparison of the $CO_2$ pressure drop between the calculation and experiment results shows good agreement at the high $CO_2$ flow rate within 5 % error, but the value is about 20 % higher in the experimental pressure drop at the low $CO_2$ flow rate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.9-19
• /
• 2020

An integrated finite element model composed of a boiler and its supporting steel structure for a 375-MW coal-fired power plant was developed. This study used the developed model for seismic analysis using SAP2000 software. For the complex superheaters, reheaters, economizers, and membrane walls of the boiler, which consisted of numerous tubes, a method of modeling them by the equivalent elements in the viewpoint of stiffness and/or inertia was proposed. In addition, a method of modeling for the connection between the boiler and steel structure was proposed. Many hangers that connect the boiler to the girders of a steel structure were transformed into equivalent hangers by decreasing the number. The displacements of the boiler stoppers on the buckstay and the posts of the steel structure were coupled by considering their interface condition. Static analysis under the self-loading condition for the developed integrated model was implemented, and the results of deformation indicated that the behavior of the steel members and the major components of the boiler were appropriate. In conclusion, the integrated model developed in this study can be used to evaluate the safety of the boiler and steel structure under seismic loads.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.12 no.4
• /
• pp.261-266
• /
• 1979

This experiment was carried out to evaluate the sanitary quality of cultured vegetables and to check the removing rate of bacteria by treating methods such as washing with tap water or commercial detergent, or blanching. Samples collected from farm land located at Busan suburbs and markets were Fragaria chiloensis var. ananasa, Lycopersicum esculentum, Capsium longum, Cucumis sativus, Lactuca scariola var. sativa leaf of Perilla frutescens var, japonica, Oananthe stolonifera and Allium odoium. Fecal coliform MPN was ra god from less than 30 to 430,000 per 100 grams of samples examined while plate count was $7.2\times10^3\;to\;2.2\times10^7$ per gram. Usually contamination rate of fecal coliform of leaf vegetal)les was much higher than that of fruit vegetables. Removing rate of bacterial density of vegetables by washing three times with tap water was about $70\%$ in fruit vegetables, about $20\%$ in leaf vegetables but it was about $80\%$ in leaf vegetables by washing with a commercial detergent. Sirvival rate of viable cell count of leaf vegetables was less than $0.1\%$ after blanching for one minutes in boiling tap water, Composition of coliform was $18\%$ Escherichia coli group, $22\%$ Citrobacter freundii group and $60\%$ Klebsiella aerogenes group, among Escherichia coli, type I being $16\%$ in total. The coliform detection from BGLB gas positive tubes being planted with various vegetables was about $80\%$ in the result of IMViC reaction.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.3
• /
• pp.220-230
• /
• 2014

BACKGROUND: Excessive metals in the soil have become one of the most significant environmental problems. Phytoremediation has received considerable attention as a method for restoring the contaminated soils. The microbes having remarkable metal tolerance and plant growth-promoting abilities could also play a significant role in remediation of metal-contaminated soils, because bioaugmentation with such microbes could promote phytoextraction of metals. Therefore, the present study was focused on evaluating the phytoextraction of heavy metals (Co, Pb and Zn) in Helianthus annuus (sunflower) induced by bioaugmentation of a phosphate solubilizing bacterium. METHODS AND RESULTS: A phosphate solubilizing bacterium was isolated from metal-contaminated soils based on the greater halo size (>3 mm) with solid NBRIP agar medium containing 10 g glucose, 5 g $Ca_3(PO_4)_2$, 5 g $MgCl_2{\cdot}6H_2O$, 0.25 g $MgSO_4.7H_2O$, 0.2 g KCl, 0.1 g $(NH_4)_2SO_4$ in 1 L distilled water. Isolated bacterial strain was assessed for their resistance to heavy metals; $CoCl_2.6H_2O$, $2PbCO_3.Pb(OH)_2$, and $ZnCl_2$ at various concentrations ranging from $100-400{\mu}g/mL$ (Co, Pb and Zn) using the agar dilution method. A pot experiment was conducted with aqueous solutions of different heavy metals (Co, Pb and Zn) to assess the effect of bacterial strain on growth and metal uptake by Helianthus annuus (sunflower). The impact of bacterial inoculation on the mobility of metals in soil was investigated under laboratory conditions with 50 mL scaled polypropylene centrifuge tubes. The metal contents in the filtrate of plant extracts were determined using an atomic absorption spectrophotometer (Perkinelmer, Aanalyst 800, USA). CONCLUSION: Inoculation with Enterobacter ludwigii PSB 28 resulted in increased shoot and root biomass and enhanced accumulation of Co, Pb and Zn in Helianthus annuus plants. The strain was found to be capable of promoting metal translocation from the roots to the shoots of H. annuus. Therefore, Enterobacter ludwigii PSB 28 could be identified as an effective promoter of phytoextraction of Co, Pb and Zn from metal-contaminated soils.