• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.7
• /
• pp.505-511
• /
• 2020

The circular composite tubes have been used as a main spar of HALE-UAV(High Altitude Long Endurance-Unmanned Air Vehicle). In this paper, an analytical model is presented for the prediction of the failure load of unsymmetrically stiffened circular spar using a modified Brazier approach. This model was used to predict the moment carrying capacity of the unsymmetrically stiffened circular spar. From the results, we can know that a stiffened cap placed in the top sector of a spar increased the bending capabilities. Four point bending tests were conducted to estimate the effect of the cap on the failure load and compared with the proposed model. And numerical simulations were performed to analyze the behavior of stiffened circular spar. Comparisons of the results from the proposed model with those from experiments and numerical modes show good correlation.

• Journal of Astronomy and Space Sciences
• /
• v.33 no.1
• /
• pp.21-28
• /
• 2016

Caves can serve as major outposts for future human exploration of the Moon and Mars. In addition, caves can protect people and electronic equipment from external hazards such as cosmic ray radiation and meteorites impacts and serve as a shelter. Numerous pit craters have been discovered on the Moon and Mars and are potential entrances to caves; the principal topographic features of pit craters are their visible internal floors and pits with vertical walls. We have devised two topographical models for investigating the relationship between the topographical characteristics and the inner void of pit craters. One of our models is a concave floor void model and the other is a convex floor tube model. For each model, optical photographs have been obtained under conditions similar to those in which optical photographs have been acquired for craters on the Moon and Mars. Brightness profiles were analyzed for determining the profile patterns of the void pit craters. The profile patterns were compared to the brightness profiles of Martian pit craters, because no good-quality images of lunar pit craters were available. In future studies, the model profile patterns will be compared to those of lunar pit craters, and the proposed method will likely become useful for finding lunar caves and consequently for planning lunar bases for manned lunar expeditions.

• Clinical and Experimental Reproductive Medicine
• /
• v.25 no.3
• /
• pp.341-348
• /
• 1998

Objective: To determine the reproductive outcomes of women undergoing microsurgical reversal of tubal sterilization at age 36 years or older. Materials and Methods: A series of 133 patients who received microsurgical reversal of the previously sterilized fallopian tubes at Seoul National University Hospital from July, 1980 to January, 1992 was reviewed and evaluated for clinical characteristics, pregnancy rates, and factors influencing the outcome of tubal reversal. Results: Of 133 patients, 78 (58.6%) had been sterilized by laparoscopic cautery. Loss of children was a leading cause for tubal reversal. The mean interval from tubal sterilization to tubal reversal was 65.0 months. The overall pregnancy rate was 52.6% (70/133), and the mean interval was 9.4 months from tubal reversal to pregnancy. Excluding 7 patients who were lost to follow-up, 76 pregnancies were confirmed in 63 patients with the delivery rate per patient of 66.7% (42/63). There were no significant differences in age, duration of tubal sterilization, postoperative tubal length between pregnant and non-pregnant groups. Conclusions: Microsurgical reversal of tubal sterilization could be a justifiable method in women 36 years age or older.

• Clinical and Experimental Reproductive Medicine
• /
• v.30 no.2
• /
• pp.179-184
• /
• 2003

The Mayer-Rokitansky-Kuster-Hauser (MRKH) syndrome refers to a condition which presents as normal female secondary sex characteristics, normal external genitalia, congenital absence of the internal vagina, usually a rudimentary uterus in the form of bilateral noncanaliculated muscular buds, and normal tubes and ovaries with normal cytogenetic and endocrine evaluation, frequent association of renal, skeletal and other congenital anomalies. However, rarely, whole uterus or a segment of uterus may be present, but lacking a conduit to the introitus. If a partial endometial cavity is present in a segment of uterus, cyclic abdominal pain may be a complaint and furthermore endometiosis can be developed. Recently, we experienced a case of MRKH syndrome with the segments of uterus accompanying endometriosis in young woman. We present this case with a brief review of literatures.

• Clinical and Experimental Reproductive Medicine
• /
• v.39 no.4
• /
• pp.161-165
• /
• 2012

Objective: To evaluate the effect of hysterosalpingo-contrast sonography (HyCoSy) on natural conception in the infertile patient. Methods: We conducted a prospective observational study recruiting 180 patients admitted to Infertility Center of Ferrara University from January 2010 to February 2012. The essential inclusion criteria was the couple's desire to perform only diagnostic evaluation on infertility causes and to wait for natural conception before proceeding with further management. Couples were investigated with hormonal profile, semen analysis and HyCoSy. Expected time for spontaneous pregnancy was 180 days from HyCoSy. First datation sonography of pregnancy was used calculating time elapsed from HyCoSy at conception. Results: Forty patients (22.2%) obtained spontaneous pregnancy within 6 months after HyCoSy. The mean of "conception time" was 75 days. The pregnancy rate was significantly higher in the first 30 days (45%) compared to other the months of observation (p<0.0005). Multiple linear regression analysis showed that maternal age and sterility duration proved independent variables in detecting the "conception time" after HyCoSy (t=3.742, p=0.001, t=2.371, p=0.02, respectively). Conclusion: A possible beneficial effect of HyCoSy is feasible especially in the days following its execution. This temporal correlation supports its therapeutic use.

• Steel and Composite Structures
• /
• v.18 no.6
• /
• pp.1569-1582
• /
• 2015

This study explores the lateral deflections of diagonal braces in concentrically-braced earthquake-resisting frames. The performance of this widely-used system is often compromised by the flexural buckling of slender braces in compression. In addition to reducing the compressive resistance, buckling may also cause these members to undergo sizeable lateral deflections which could damage surrounding structural components. Different approaches have been used in the past to predict the mid-length lateral deflections of cyclically loaded steel braces based on their theoretical deformed geometry or by using experimental data. Expressions have been proposed relating the mid-length lateral deflection to the axial displacement ductility of the member. Recent experiments were conducted on hollow and concrete-filled circular hollow section (CHS) braces of different lengths under cyclic loading. Very slender, concrete-filled tubular braces exhibited a highly ductile response, undergoing large axial displacements prior to failure. The presence of concrete infill did not influence the magnitude of lateral deflection in relation to the axial displacement, but did increase the number of cycles endured and the maximum axial displacement achieved. The corresponding lateral deflections exceeded the deflections observed in the majority of the previous experiments that were considered. Consequently, predictive expressions from previous research did not accurately predict the mid-height lateral deflections of these CHS members. Mid-length lateral deflections were found to be influenced by the member non-dimensional slenderness (${\bar{\lambda}}$) and hence a new expression was proposed for the lateral deflection in terms of member slenderness and axial displacement ductility.

• Computers and Concrete
• /
• v.12 no.2
• /
• pp.211-228
• /
• 2013

The structure analyzed in this paper has particular building style and special structural system. It is a rigid-connected twin-tower skyscraper with asymmetrical distribution of stiffness and masses in two towers. Because of the different stiffness between the north and the south towers, the torsion seismic vibration is significant. In this paper, in order to study the seismic response of the structure under both frequent low-intensity earthquakes as well as rare earthquakes at the levels of intensity 7, the analysis model is built and analyzed with NosaCAD. NosaCAD is an nonlinear structure analysis software based on second-development of AutoCAD with ObjectARX. It has convenient modeling function, high computational efficiency and diversity post-processing functions. The deformations, forces and damages of the structure are investigated based on the analysis. According to the analysis, there is no damage on the structure under frequent earthquakes, and the structure has sufficient capacity and ductility to resist rare earthquakes. Therefore the structure can reach the goal of no damage under frequent earthquakes and no collapse under rare earthquakes. The deformation of the structure is below the limit in Chinese code. The time sequence and distribution of damages on tubes are reasonable, which can dissipate some dynamic energy. At last, according to forces, load-carrying capacity and damage of elements, there are some suggestions on increasing the reinforcement in the core tube at base and in stiffened stories.

• 한국연소학회:학술대회논문집
• /
• 2005.10a
• /
• pp.162-169
• /
• 2005

The performance of oxygen combustion with $CO_2$ feeding was investigated in a pyrex tube furnace. The inverse type multi-hole burner was used for improving mixing and wide operating range. It introduced oxygen, fuel, and oxygen, respectively, from center tube to outer tubes. Oxygen combustion characteristics with excess oxygen ratio, oxygen feeding ratio, and $CO_2$ feeding flow rate were studied to optimize the operating condition and to apply the oxygen combustion with recirculation of flue gas to a real furnace. This paper presents results on the effect of $CO_2$ feeding flow rate on the structure of the flames and concentrations of NO and CO emissions. The visible flame length was shortest due to well mixing between fuel and oxygen when the oxygen feeding ratio was 0.25. The NO emission was reduced drastically regardless of excess oxygen ratio when the $CO_2$ feeding flow rate was larger than 15 lpm. The CO emission is varied by changing the $CO_2$ feeding flow rate but the CO emission characteristics is highly affected by excess oxygen ratio. When the excess oxygen ratio is below ${\lamda}=1.1$, the CO emission increased as the $CO_2$ feeding flow rate increased.

• Environmental Analysis Health and Toxicology
• /
• v.20 no.2 s.49
• /
• pp.167-178
• /
• 2005

This study was carried out to evaluate the temporal, spatial, and seasonal variations of VOC, and to characterize the VOC concentrations in two large industrial complexes located in Pohang and Gumi cities. Twenty -four hours continuous sampling of selected VOC was made with STS 25 sequential tube samplers and double-bed adsorbent tubes. Air samples were collected every three hour interval for 7 consecutive days in each site during summer and winter. VOC were determined by thermal desorption coupled with GC/MS. A total of 27 VOCs of environmental concern were determined, including aliphatic, aromatic and halides. Generally. concentrations of toxic VOC were higher in Gumi than Pohang, and VOC levels in industrial areas were typically several-fold higher than those in residential areas. The most abundant VOC appeared to be toluene for both cities. However, chlorinated VOC were higher in Gumi than Pohang, while aromatic VOC were more abundant in Pohang than in Gumi. Two cities showed relatively different variations of VOC concentrations within a day. It is likely that traffic related sources are major factors affecting the VOC in Pohang, and industrial solvents usages are important sources in Gumi. These results imply that the occurrence and levels of atmospheric VOC are strongly dependent on the type of industries in each city. Therefore, in order to develop any control strategies or to establish the priority rankings for VOC in large industrial complexes, the type of industries and the occurrence of VOC in the atmosphere should be taken into consideration.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.8
• /
• pp.96-101
• /
• 2007

Gas Discharge Tubes (GDTs) are widely used as surge protectors for communication applications due to their small internal capacitance. In these days, however, they are mostly used in combined configurations, because the sparkover voltage required to initiate the discharge process in the GDTs and the time taken for arc formation process can be large enough to damage to sensitive circuits. For GDTs with a considerably high initial residual voltage, we should limit the peak voltage using a TVS or filter. We made a hybrid SPD circuits of common-mode type and differential-mode type with the filter using common-mode choke. Also, we applied lightning impulse voltage and ring wave voltage which frequency bandwidth are different each other and verified the characteristics of hybrid SPD circuits according to waveshapes. We describe how the applied SPDs operate in protection process steps with the actual data obtained from the residual voltage measurement at each step. The experiment results show that the surge voltage reduction with the choke coil is more effective in differential-mode circuit than in common-mode circuit.