• Journal of Chest Surgery
• /
• v.18 no.3
• /
• pp.529-533
• /
• 1985

Though esophageal cancer was not a common disease, early metastasis and direct extension to adjacent organ were important on the treatment of disease. Therefore, palliative operation was often useful in advanced esophageal cancer. Between June 1985 through July 1985, we treated three cases of inoperable esophageal cancer with Celestin`s endo-esophageal tube by esophageal intubation. Three operations were done under general anesthesia. Celestin`s tube were inserted via oral cavity and additional traction on stomach were applied. After complete insertion of tube was done, the distal end of Celestin`s tube was modified in length. Also stay suture was applied between tube and stomach wall was applied. Postoperative esophagogram revealed good esophageal patency through Celestin`s tube. Clinically, swallowing difficulty was much improved after operation.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.4
• /
• pp.121-126
• /
• 2011

An accumulator placed on the refrigerant cycle pipe lines is a part to relax fluctuations of pressure within the pipe lines and stabilize refrigerants flowed into pipe. The accumulator has been mainly manufactured by the process of tube spinning using CNC(Computer Numerical Control) lathe. However, this process has the defects which are low productivity per hour and high cost. For that reason, tube end-forming using roll die is actively being developed, recently. The purpose of this study is to develope the tube end-forming process using roll die in order to manufacture the accumulator for the refrigeration pipe lines. First, the process design of tube end-forming was performed based on specification of product, and then was verified with FE analysis. Also, the effects of friction coefficient and revolution speed of roll die on forming load were investigated. The analytical results were applied in the final process design of tube end-forming. Finally, tube end-forming test was carried out to verify the validity of the FE analysis and the process design.

• Journal of KSNVE
• /
• v.11 no.2
• /
• pp.241-248
• /
• 2001

The present paper describes experimental and computational work to augment the magnitude of the impulsive wave. An experiment was performed using a simple shock tube with an open end and numerical calculations were carried out to solve the unsteady, axisymmetric, inviscid, compressible governing equations. The control strategy applied was to alter the exit geometry of a straight tube to a sudden enlargement tube and a flare tube. The effects of the configurations of the tube exit on the magnitude of the impulsive wave were investigated over the range of the weak shock Mach number from 1.01 to 1.10. The results obtained were compared to those of the straight tube tests. The numerical result predicted the magnitude of the experimented impulsive waves with a good accuracy. The present passive control technique enabled the magnitude of the impulsive wave to augment by about 23 percent, compared to that of the straight tube of no control.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.7
• /
• pp.33-44
• /
• 1999

Enthalpy transport in a pulse tube was investigated by two-dimensional analysis of mass, momentum and energy equations assuming that the axial temperature gradient in the pulse tube was constant. The time-averaged second-order conservation equations of mass, momentum and energy were used to show the existence of steady mass and enthalpy streaming. Effects of the axial temperature gradient, velocity amplitude ratio, and heat transfer between the gas and the tube wall On the steady mass and enthalpy streaming were shown. Enthalpy loss due to the steady mass streaming is zero for basic and orifice pulse tube refrigerators, but it is proportional to the axial temperature gradient and steady mass flow rate through a pulse tube for double inlet pulse tube refrigerators.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.291-296
• /
• 2000

Usually the contact between fin collar and tube surface for fin-tube heat exchanger is secured by mechanical expansion of the tubes. The objective of the present study is to develop a method of measuring the thermal contact resistance between fin collar and tube surface for fin-tube heat exchanger. Also an experimental work has been performed to evaluate the thermal contact resistance, and a rigorous numerical analysis has been employed to calculate the contact resistance from the measured data. The experiments have been conducted fur the fin-tube heat exchangers with the tube of outer diameters 7 and 9.52 mm.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.68-71
• /
• 2007

A computational study has been performed using a chimera scheme to study the various operating processes inside a ballistic range. The compression flow fields in the pump tube and projectile motion in the launch tube are captured for various piston masses and diaphragm rupture pressures. The effect of a shock tube in between the pump tube and launch tube is analyzed. The results are compared with available experimental data. It is noted that, by adding a shock tube in between the pump tube and launch tube, the peak pressure in the ballistic range can be reduced without appreciable reduction in the velocity of the projectile.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.550-555
• /
• 2003

When a shock wave arrives at an open end of tube, an impulse wave is discharged from the tube exit and complicated flow is formed near tube exit. The flow field is influenced by the cross-sectional geometry of tube exit, such as circular, square, rectangular, trapezoid and etc. In the current study, three-dimensional propagation characteristics of impulse wave discharged from the tube exit with non-circular cross section are numerically investigated using a CFD method. Total variation diminishing (TVD) scheme is used to solve the three-dimensional, unsteady, compressible Euler equations. Computations are performed for the Mach numbers of the incident shock wave $M_{s}$ below 1.5. The results obtained show that the peak pressure of the impulse wave and propagation directivity depends on the cross-sectional geometry of tube exit and the Mach number of incident shock wave.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.6 no.2
• /
• pp.16-19
• /
• 2010

In this study, the axial ODSCC occurrence of domestic OPR 1000 steam generator tube was caused by the tube weakness and the sludge accumulation in the secondary side of steam generator. Inconel 600 HTMA used as tube material is related to most of tube leakage accidents in the world and also these ODSCCs were detected mainly at the 5th TSP(Tube Support Plate) to the 8th TSP of hot leg side. These elevations(5th TSP to 8th TSP) pave the way for the sludge accumulation. As a result of EC(Eddy Current) Bobbin and RPC data analysis, ODSCCs were occurred at contact points of tube and tube support plate. The more accumulated sludge, the higher occurrence frequency of ODSCC.

• International journal of advanced smart convergence
• /
• v.8 no.2
• /
• pp.88-93
• /
• 2019

This study explores one of charity drive contents on YouTube channel. Due to the advance of science and technology, ordinary people come to make their own video content online, usually via YouTube. YouTube becomes number one online video storage/streaming platform, and many people upload their own video and they get attention and fame. This study analyzes various aspects of Shoot for Love, soccer-based charity drive videos shown on YouTube channel created in South Korea. Unlike popular videos in YouTube, Shoot for Love centers on charity by casting popular soccer players and celebrities. Especially, this study researches 1) Components 2) Traits of Components 3) Contents of Components in Shoot for Love. Throughout this, it not only analyzes unique aspects of Shoot for Love that show how and why YouTube content matters, but also suggest plausible methods to drive charity and institution are suggested that appeal to the public.

• Journal of Trauma and Injury
• /
• v.25 no.2
• /
• pp.37-43
• /
• 2012

Purpose: A tube thoracostomy is an invasive procedure that places patients at risk for complications. Tube thoracostomies are frequently performed by emergency medicine residents. Thus, the purpose of the study was to assess both the complication rate for tube thoracostomies performed by emergency medicine residents and the factors associated with these complications. Methods: A retrospective chart review of all patients who had undergone a tube thoracostomy performed by emergency medicine residents between January 2008 and February 2009 was conducted at a university hospital. Complications were divided into major and minor complications and into immediate and delayed complications. Complications requiring corrective surgical intervention, requiring the administration of blood products, or involving situations requiring intravenous antibiotics were defined as major. Complications that were detected within 2 hours were defined as immediate. Results: Tube thoracostomies were performed in 189 patients, and 70 patients(37%) experienced some complications. Most complications were immediate and minor. In multiple logistic regressions, BMI, hypotension and resident seniority were significantly associated with complications. Conclusion: The prevalence of complications was similar to these in previous reports on the complications of a tube thoracostomy. Most complications from tube thoracostomies performed by emergency medicine residents were immediate and minor complications. Thus, emergency medicine residents should be allowed to perform closed tube thoracostomies instead of thoracic surgeons.